Audio booster - turn it on permanently - can it be done? - Touch Diamond, MDA Compact IV General

Is there a way to turn on the audio booster permanently?
The tweaks I have found reset with each softreset... so I wonder if anyone found a permanent solution...

maybe someone can make a .cab that does the registry edit with every boot-up...
This one:
"HKLM/System/State/Hardware/Headset
set the value to 1"
I would be INSANELY happy if someone would make this!

If you want to boost volume on device try this, as it works really good:
http://forum.xda-developers.com/showthread.php?t=428170

thanks for the tip, but there is no problem with the volume...
the sound just totally lacks bass trough the bluetooth headset because audio booster is not on

Audio booster...
jodeltje said:
thanks for the tip, but there is no problem with the volume...
the sound just totally lacks bass trough the bluetooth headset because audio booster is not on
Click to expand...
Click to collapse
I agree.... that bugs the hell out of me also. Don't HTC realise that not everybody likes to use the shipped wired headset. After all, this is the 21st century and who wants wires anyway? Surely the device should active the audio booster when any type of headset is detected.
Come on HTC... I think a hot fix is required here!!

Jorlin said:
Is there a way to turn on the audio booster permanently?
The tweaks I have found reset with each softreset... so I wonder if anyone found a permanent solution...
Click to expand...
Click to collapse
1. Install MortScript 4.1 http://www.sto-helit.de/downloads/mortscript/MortScript-4.1.zip
2. Put Audiobooster.mscr (in attachment) in to \Windows\Autostart
3. Afert softreset audiobooster will be on (in few seconds after TF3D will be loaded).

xcoom said:
1. Install MortScript 4.1 http://www.sto-helit.de/downloads/mortscript/MortScript-4.1.zip
2. Put Audiobooster.mscr (in attachment) in to \Windows\Autostart
3. Afert softreset audiobooster will be on (in few seconds after TF3D will be loaded).
Click to expand...
Click to collapse
I am glad you found out about what I posted as solution in the Raphael forum... *rofl*

xcoom said:
1. Install MortScript 4.1 http://www.sto-helit.de/downloads/mortscript/MortScript-4.1.zip
2. Put Audiobooster.mscr (in attachment) in to \Windows\Autostart
3. Afert softreset audiobooster will be on (in few seconds after TF3D will be loaded).
Click to expand...
Click to collapse
it works... just not on bluetooth headsets
thanks for making the thingy though.
does anybody have an idea to get more bass trough bluetooth?
(tried srs wow hd, but it doesn't support wm 6.1)

Buy a motorokr s9... I am in the same thread, because it has too much of it.
Actually I want to reduce the bass.

jodeltje said:
maybe someone can make a .cab that does the registry edit with every boot-up...
This one:
"HKLM/System/State/Hardware/Headset
set the value to 1"
I would be INSANELY happy if someone would make this!
Click to expand...
Click to collapse
I just made a .reg file of it. Quite easy to click on after boot and you're on.
BUT... The equalizer doesn't seems to work, nothing happens how much I adjust it. Even resetted all changes in Advanced Config and Diamon Tweak.
How do You make it work?

Related

Bluetooth Volume?

My bluetooth volume is really low on the headset, anyone else have this problem? Im using the Jawbone bluetooth headset on Dutty's v3 rom on my att tilt. Ive tried different roms, adjusting the volume to highest on the phone and the headset but callers are still hard to hear. Ive used the same bluetooth headset on my previous 8525 with no problems. My headset was even too loud when on high with the 8525. Any advice would be great because i do all my talking via bluetooth with my phone.
Yes, everyone has this problem - although I heard something about AT&T's latest ROM having some fix for the BT, but wasn't sure exactly what it fixed...
FIX?
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
deeznuts said:
Well if the problem was fixed either buy a chief here or htc or whomever, there should be a cab file floating around with the fix. thats what im hoping for or maybe a registry edit to help fix the problem. Ive read many threads on how the bluetooth volume suck for cars as well. Maybe if theres a fix for that, the same fix should fix my problem and many other's.
Click to expand...
Click to collapse
Yeah as a matter of fact you can take this into your own hands. The latest AT&T ROM has a file called "AudioPara4-CWS_V6.csv" which I cooked into my new ROM (releasing tomorrow morning) as well. The thing is you don't need to "COOK" it at all. And it is simply a comma delimited spreadsheet. I have attached it so you can download it. Simply edit it as necessary for your headset, drop it in \Windows and add the following registry key to your device:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\Windows\AudioPara4-CWS_V6.csv"
Drop and Go?
So i just drop the unzip file u provided into my documents and edit the registry myself as u described? Sounds easy enough if thats all it takes. Whats the name of the rom u are releasing? Ill have to give it a try.
?
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
deeznuts said:
DARN! When i downloaded the file on my tilt and tried to open it i get the usual zip error of cant find the archive file crap. Guess ill have to wait to get home from work to try it on my computer.
Click to expand...
Click to collapse
If you're using File Explorer select "Show All Files"...sorry I zipped it directly from my ROM and it has the hidden and system attributes set. Even on a Windows machine you will need to enable hidden files AND Protected OS files to be able to see it. And put it in \Windows.
Nope
Even after i check show all files on file explorer, then click on the zip file, get the same zip error when i try to open it.
EDIT> See next post.
alltheway said:
Any chance of making this a .cab?
Im having trouble trying to follow your instructions. Every time I unzip it, I can't seem to find it. Am I missing something?
Click to expand...
Click to collapse
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
deeznuts said:
Exactly, glad im not the only one that cant unzip this file. sounds like we just need to place a couple files in my documents then edit the reg. This might sound dumb but can u just upload the files a la carte that need to go to the my documents folder instead of making it a zip file? A cab that installs by putting these files and edits the reg would be too good to be true. Anyone up for the challenge?
Click to expand...
Click to collapse
Make sure you have hidden system files unchecked in Windows?
If you using Vista go to tools in any folder. Click on folder options.
go the view tab.
uncheck "hide protected operating system files"
XP should work the same way as well. This solved it for me.
Adding Registry Key
Hey I was just wondering if I did this right...or am I totally off?
alltheway said:
Hey I was just wondering if I did this right...or am I totally off?
Click to expand...
Click to collapse
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
jackleung said:
Yes, you are totally off as AcousticFile is a String, not key.
Try the Cab I attached.
Anyone found this key w/ the cvs file really help anything as I don't see any problem w/ the current BT so far???
Click to expand...
Click to collapse
Thanks for the .cab
I was wondering if you could provide me with a screen show of what it should look like so I will know for future reference.
Thanks,
EDIT: Am I getting closer?
Whats this cab do?
Thanks for the cab file but whats it supposed to do? I installed the cab to the device then soft reset the phone. I then talked via bluetooth headset for 20 minutes after reset and the low volume was still there. Almost seemed the cab did nothing more then take up 16kb of memory on the phone. Didn't address the low volume problem in the bluetooth headset. It must be something with the phone because i know this headset gets very loud becuase ive used it on several devices and all being consistant except the tilt. Any other suggetions to fix this problem anyone?
you can try this:
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway
Tell me what yours say for the "SpkVolume" setting ??
also...
I got this tip from somewhere before ... see if this help you ... it's for the BT handset mic volume ... but within those keys ... there should be one for the speaker volume as well ( you have to search for YOUR device ... as everyone's is different ):
quote:
""
Navigate to
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device
Under this you would find several keys. Each key represents a device you are paired with. In my case I have only 2 keys since my PDA is paired only with 2 devices (my notebook, and my handsfree) Then navigate to the handsfree key, so mine reads like this.
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Device\000c55401c45\Services\0000111e-0000-1000-8000-00805f9b34fb
You would find a dword called name, verify that the value corresponds Hands Free
Change the channel to 5 (my default was 2) 5 seems to work better with Motorolla H500.""
goodluck
Bump for some more info.
If you search the forum you will find a few posts on this subject. I have been searching through them just about every day and I have had no luck in finding an answer. Seems editing the registry doesnt help and the BT fix cab was released by HTC to fix bluetooth headsets dropping calls. I have tried the fix and I have tried using Jetware, I have not tried the registry fixes because many others have tried and said it doesnt work. Ive been through 4 headsets and non have good volume. I am still waiting on someone to find a working solution or a reasonably priced headset (below $100 thats non-stereo) that works. I think you may be stuck for a while like so many others....
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
deeznuts said:
Man, that sucks. I never get dropped calls on from using bluetooth, only when the phone drops the calls from ****ty att service. Guess thats why the cab didnt help out with increased volume. i did tons of searching beforestarting this thread and like u found nothing so i decided to post and see what happens. Quentin stated above he fixed the problem in his latest rom released today, 1/14/08, so i guess ima have to try his rom out to see if it helps. i really dont want to leave dutty's 1.1 rom cus of opera 8.65 and his great features cooked in. i love how dutty has the battery status under htc home with the exact percentage of battery life. anyone have a cab for that feature dutty cooks into his roms? thanks!
Click to expand...
Click to collapse
U don't have to limit what rom to use to have this so called BT volume fix (which I am not sure if it really working or not), just use the cab I package above.
For that battery status today plugin, you can find it here too: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
edit: I just noticed you are using Dutty's 1.1 rom. U can try my rom here which based on his 1.1 rom but w/ a few enhancement: http://forum.xda-developers.com/showthread.php?t=357490

Diamond volume increasing cab(audiopara3.csv)

first of all, thanks Tripp found the way to increasing Diamond volume.
i have make it to cab file, try it.
http://www.ricky119.com/2008/10/10/windows-mobile系统声音增强
Thanks mate to you and Tripp..well done.
There's a problem with the cab file mate. It tries to install the csv file into the "Windwos" folder, not "Windows".
Cheers.
johncmolyneux said:
There's a problem with the cab file mate. It tries to install the csv file into the "Windwos" folder, not "Windows".
Cheers.
Click to expand...
Click to collapse
Hi,
here is a corrected version.
I tried the medium one , much better , 10x !
any way to increase Radio FM volume too ? (when using the speaker) I tried registray edit of the FM Volume , but still volume very low....
Hi there,
any more feedback? I can't test it atm, I'm in a hotel and using Diamond as umts-modem
thank you very much
Will test and give you my feedback!
Didn't notice any difference tbh...
The problem was solved, try to download "lighter_bootst.zip"
http://forum.xda-developers.com/showthread.php?t=428170
It sounds great! My volume of diamond has changed to very very loud. Please remember do not switch the volume to maximum, otherwise you have a risk that the diamond will burnt.
volume control
It's great , my Diamonds volume very loud but volume switch not working just show Volume control no up or down with key
does it work for samsung omnia ?
that cab made my phone sound worse
funnysurf said:
Hi,
here is a corrected version.
Click to expand...
Click to collapse
it works on my touch diamond, but not much louder than it was 'out of the factory'. Anyway thanks to u all for the effort.

SEX1 Camera sound

Hi, guys.
How I can switch off this annoying camera sound? I try to find some keys in registry, but can't find some useful. From camera menu I can't switch off sound, just choose from 4 variants of it.
Thanks for assistance.
you can switch it of in the camera menu...
Not necessarily...
Sony removed the "sound off" option in the newest NAM R2A ROM
Legal issues I guess
guess so too.
there was a political discussion 'bout that. taking pictures of peeing womans or so without makeing a noise ... im somwhat sure that this was the work of an american politician.
I think it has to do with this new law:
http://techfragments.com/news/318/Tech/New_Law_Will_Require_Camera_Phones_to_Click.html
what happens if you change the name of sounds.blob to something else?
fards said:
what happens if you change the name of sounds.blob to something else?
Click to expand...
Click to collapse
hmmm... upskirts ??
.
Why not just turn off your ringer before taking the picture. Then the speaker is disabled and voila, no camera sound.
achmed20 said:
guess so too.
there was a political discussion 'bout that. taking pictures of peeing womans or so without makeing a noise ... im somwhat sure that this was the work of an american politician.
Click to expand...
Click to collapse
since when did Politicians start dictating technology?
btw.i am sure there must be a way via registry.
with normal se phones we replace the camera sound with a empty file
try this
Reversedhex said:
with normal se phones we replace the camera sound with a empty file
try this
Click to expand...
Click to collapse
No need for X1 (R2A), just delete sounds.blob
Either:
- Overwrite sounds.blob with a 0kb file or delete it (whatever works for you)
- Or set HKLM\Software\SonyEricsson\Camera\PROPERTY_PHOTO_SHUTTER_SOUND to value 4.
- Or turn down system volume to 0.
Disables the shutter sound.
Regards
xperian
cbuc1125 said:
Why not just turn off your ringer before taking the picture. Then the speaker is disabled and voila, no camera sound.
Click to expand...
Click to collapse
Yeah, but not so simple way, isn't it?
xperian said:
Either:
- Or set HKLM\Software\SonyEricsson\Camera\PROPERTY_PHOTO_SHUTTER_SOUND to value 4.
Disables the shutter sound.
Regards
xperian
Click to expand...
Click to collapse
It works!
Great thanks!!!
AlexDem said:
Yeah, but not so simple way, isn't it?
Click to expand...
Click to collapse
I like to enable the shutter sound when I let friends take pictures. Because the camera button doesn't really give feedback...
AlexDem said:
It works!
Great thanks!!!
Click to expand...
Click to collapse
yay! no problem.
omg..why cant u guys just put it on silent mode while taking pics?
it doesnt make sound then.
atleast on my X1
Nocturnal310 said:
omg..why cant u guys just put it on silent mode while taking pics?
it doesnt make sound then.
atleast on my X1
Click to expand...
Click to collapse
Because the camera sound is something I newer want, so why not remove it. So anyway. There is a solution so all this posts that is posted now is unnecessary. Like mine
All I did was choose Camera Sound 4, there's no noise. I'm running UK R2 btw.
Which file contains the sound for auto focus? The sound is too loud. I would lower the volume of the sound file or even delete it completely.
I sometimes forget to turn off the phone volume and that sound is too noisy!
xperian said:
Either:
- Overwrite sounds.blob with a 0kb file or delete it (whatever works for you)
- Or set HKLM\Software\SonyEricsson\Camera\PROPERTY_PHOTO_SHUTTER_SOUND to value 4.
- Or turn down system volume to 0.
Disables the shutter sound.
Regards
xperian
Click to expand...
Click to collapse
Actually this works just great for me. I figured out my keyboard problem is due to something else. Thanks very much for the help on disabling the shutter sound. Now if only we could get rid of the autofocus sound too! =)

ICR for Kaiser (2 side call recording software)

BIG thanks to Shmilson and rr69 for their work!!!
There's a new kid on the block, rr69's modded cab without the new drivers... I'd try this first (read his post to understand why):
http://forum.xda-developers.com/showpost.php?p=3511566&postcount=128
rr69's lite cab, just the driver, no graphics:
http://forum.xda-developers.com/attachment.php?attachmentid=162761&d=1236030009
Shmilsons QVGA skinned cab:
http://forum.xda-developers.com/attachment.php?attachmentid=162900&d=1236070663
Check out mskips thread with a alternative solution:
http://forum.xda-developers.com/showthread.php?t=493118
Here's how to set up ICR on your Kaiser :
1. Install the cab of your choice (Shmilsons for QVGA skinned version or rr69 if you are happy with your current skin).
2. Install Vito Audio Notes or any recording software of your choice (I'm using Vito Audio Notes for touch 1.02)
3. Soft reset
4. Make a call, when your'e connected use the menu (bottom left corner) and choose start recording. Wait a couple of seconds, then hang up.
5. Start your recording software and put it to automatic record calls
6. DONE!
If it's not working for you, you could try this:
1. Install .NET compact framework: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
2. If the "Start Recording" doesn't appear, try to uninstall your dialer skinn (or turn it off), soft reset. Try to record a call again, if it works you can reinstall your skinn.
People are looking for the reason why it's working for some and just not at all for others. As soon we have a clue I'll post it here.
Notes:
I don't have to do anything after a soft reset, Vito records everything by default.
Vito records all calls WITH BOTH YOUR OWN AND THE CALLERS VOICE, Vito will name the files according to your contacts (or info in google maps if your'e using any numbers from google).
Now you can record your calls and listen to both parties without any annoying hassle like using the speakerphone!!!
There's no beeps or any other way the caller can hear that your'e recording with this setup... Illegal in some countries, it's your responsibility! =)
Below: Picture shows Vito Audio Notes Touch interface...
no go
Unfortunately my Kaiser says that ICR in not valid windows application on matter what I do. It seem the problem is in ICR.exe because other components install just fine. And of course Vito records only me speaking.
Anyway the fact that it is possible to record both parties makes me optimistic. Maybe the day will come that I will have my advanced, expensive WMphone do what every cheap simple eric or nokia can do for over 5 years
I run stock Orange rom 6.0 (maybe that's a problem)
It say's that for me too... Ignore it, you don't need to open the app, it's just for settings anyways. Just follow the steps and use Vito (or resco or what you prefer).
It still mess up your graphics though.
do you have a screenshot of ICR?
I have been using Vito AudioNotes (on my Kaiser) for months now and when i want to record a call i must have it on Speakerphone, but i simply cover the speaker phone with my finger to reduce the volume so others dont listen in on the conversation.
pls show me what the ICR graphic is?
Thanks
GLO said:
do you have a screenshot of ICR?
I have been using Vito AudioNotes (on my Kaiser) for months now and when i want to record a call i must have it on Speakerphone, but i simply cover the speaker phone with my finger to reduce the volume so others dont listen in on the conversation.
pls show me what the ICR graphic is?
Thanks
Click to expand...
Click to collapse
I don't have a clue what it looks like, can't open it. The phone just use the drivers from the cab, I'm using Vito Audio Notes and it works like a charm. Callers and my own voice crystal clear. Had some minor glitches on some calls during the day but overall fantastic!
Any developers reading this? would be nice with a clean cab for kaiser! =)
Since I haven't come up with a solution to the graphic problem I simple disabled caller skin with Advanced Config and using Windows ugly thing for the time beeing... AT least it works, recording calls are more important (for me anyways).
I'm confused, what's this doing that Vito doesn't do? Is it going between the two? I know on the Kaiser most other recording software can't record the outgoing conversation, so no question there, just wondering how this enables it to work.
And is it progressing? No messing with the phone? And does it stay forever, or do you have to do this each reset? Each call?
roomy and i editing icr program stuff to work on kaiser so hang tight
Whoooopieee! Thanks a million!
khaytsus said:
I'm confused, what's this doing that Vito doesn't do? Is it going between the two? I know on the Kaiser most other recording software can't record the outgoing conversation, so no question there, just wondering how this enables it to work.
And is it progressing? No messing with the phone? And does it stay forever, or do you have to do this each reset? Each call?
Click to expand...
Click to collapse
Yes, this goes in between... There was an old audio driver for windows called virtual audio cable, it catched the sound (data) before it reached the audiocard and then you could route it to where ever you liked. This is pretty much the same thing.
So you can use Vito or any other app. The ICR just reroute the audio so that it ends up in the right place.
You have to use 'start recording' from the dialer menu after every soft reset but just for the first call. After that the 'driver' is activated and Vito will recieve audio for both parties of a conversation.
jorra said:
Yes, this goes in between... There was an old audio driver for windows called virtual audio cable, it catched the sound (data) before it reached the audiocard and then you could route it to where ever you liked. This is pretty much the same thing.
So you can use Vito or any other app. The ICR just reroute the audio so that it ends up in the right place.
You have to use 'start recording' from the dialer menu after every soft reset but just for the first call. After that the 'driver' is activated and Vito will recieve audio for both parties of a conversation.
Click to expand...
Click to collapse
Hopefully it can be worked out so this is not a battery drain, and can be automated.
I wonder why Vito etc don't do this themselves?
khaytsus said:
Hopefully it can be worked out so this is not a battery drain, and can be automated.
I wonder why Vito etc don't do this themselves?
Click to expand...
Click to collapse
I haven't noticed any battery drain and Iv'e set up Vito to record every call for the last 3 days so it looks promising.
Vito and/or Resco probably would if they could, this driver comes from HTC and I guess it's easier for the hardware vendor to create this than for a software developer. HTC don't need to make it work for any other brand or model, just for the device they choose. That's why... I guess... But what do I know, I'm nothing but a sound engineer...
Fix for graphics problem
jorra said:
Since I haven't come up with a solution to the graphic problem I simple disabled caller skin with Advanced Config and using Windows ugly thing for the time beeing... AT least it works, recording calls are more important (for me anyways).
Click to expand...
Click to collapse
Great find! This program does exactly what I need it to do, and with Audio Notes, I can maintain a record of all conversations. Very useful indeed! It's already saved me a couple of times by recording conversations where someone told me a phone number that I had to remember because I didn't have any way to write it down while driving.
I tried installing MBarvian's Opal Phone Canvas, and that seems to fix the graphics problem. The recording still works as before. Also, I can run the ICR executable, and it seems to be very similar to Audio Notes, although the vga graphics don't display correctly on my tilt...
_______________________________________________________________
AT&T Tilt currently running ParleyP's Phoenix version 2.16
How to uninstall IRC?
How can i revert back, my battery status and caller skin?
Hi All,
*** STRIPPED ICR CAB ***
Started off by downloading the cab mentioned in the starting post. Then i removed all the skin and other irrelevant file and registry entries in the cabfile. Which left me with a working ICR "lite" cabfile.
Just follow the same procedure described in the start post but instead use this cab.
It won't ruin the phoneskin because it has been stripped.
No guarantees, but this cab works fine for me..
Regards,
RR69
rr69 said:
Hi All,
*** STRIPPED ICR CAB ***
Started off by downloading the cab mentioned in the starting post. Then i removed all the skin and other irrelevant file and registry entries in the cabfile. Which left me with a working ICR "lite" cabfile.
Just follow the same procedure described in the start post but instead use this cab.
It won't ruin the phoneskin because it has been stripped.
No guarantees, but this cab works fine for me..
Regards,
RR69
Click to expand...
Click to collapse
I'm curious to see how this works for folks. Next step, make this automagically work after resets, etc.
khaytsus said:
I'm curious to see how this works for folks. Next step, make this automagically work after resets, etc.
Click to expand...
Click to collapse
I tested that, and it does automaticly work after a soft reset. Here's what i did until now.
(The Sashimi part and hard reset is optional)
I installed the cabfile (ICRKaiser.cab) and Vito audionotes 1.37 on my tytnII. Started audionotes, and edited the settings so the app automaticly records calls on my stroragecard in low quality mp3 format. Did a soft reset, and made the first call and selected "Start Recording" from the menu in the "normal" phone app. (Ended the call after a few seconds)
All the calls after that ar automaticly recorded by audionotes even after a softreset. Both sides are recorded... (You dont have to use "Start Recording" from the phone app. Vito does it all automaticly.)
--------------------
Sashimi automation! (see: http://www.winmo-experts.com/viewtopic.php?f=7&t=4)
copied:
"\Program Files\VITO\Audionotes\settings.ini" to
"Storage Card\SASHIMI\AUTO\Root\Program Files\VITO\Audionotes\settings.ini"
Copied
"ICRKaiser.cab" and "VitoAudioNotes.cab" to
"Storage Card\SASHIMI\AUTO\CAB\ICRKaiser.cab"
"Storage Card\SASHIMI\AUTO\CAB\VitoAudioNotes.cab"
------------------------
So when i do a hard reset, and Sashimi has installed the cabfiles and copied the ini file, every works right away. and survives softresets
B.t.w. if you dont want the automatic call recording function you can skip the Vito Audionotes installation. The recording option in the Phone menu also works for two side call recording. It saves the recording in: "\My Documents\Recording\"
Regards, RR69
Updated CAB file with QVGA skin for ICR applet
rr69 said:
Hi All,
*** STRIPPED ICR CAB ***
Started off by downloading the cab mentioned in the starting post. Then i removed all the skin and other irrelevant file and registry entries in the cabfile. Which left me with a working ICR "lite" cabfile.
Just follow the same procedure described in the start post but instead use this cab.
It won't ruin the phoneskin because it has been stripped.
No guarantees, but this cab works fine for me..
Regards,
RR69
Click to expand...
Click to collapse
I've updated the "lite" CAB mentioned above with the ICR applet that was originally on the CAB floating around and skinned it to QVGA. Only for portrait nowbut I'll try to update it once more if I have the time. I've also overwrote the BEEP and BEEPBEEP sounds with silent WAV files, so no sound is made when starting/stopping recordings.
The applet let's user set format of recording (AMR or WAV) and if to save them on memory or card. It then shows a list of recorded conversations that can be played on the app itself.
It can be used stand-alone if one wants to manually start recording selected conversations or with the procedure on the first post of this thread for the automatic mode.
And as RR69 said here: "No guarantees, but this cab works fine for me..
"
And to think about a few months ago, no one could believe we could do ICR on HTC devices! Ha!
shmilson
Cool,
I just stripped the whole vga ICR application out of the cabfile. Nice to see that someone took the time to reskin it to qvga.
The only thing i would like to find out if the volume of the recordings can be set to be a bit louder.
Regards RR69

Sliding sounds

Hey
i have made a little cab file with sliding sounds for the keyboard.
it is my first attemp to create such a file, and it is my first attemp to give back to the community.
the additional sounds are souds i have found in the forums of XDA.
so credit goes out to the people who have created and shared them.
so far i have renamed the original sliding sounds to "HTC name" and the name stands for the original name of the sound.
i only added a few soundsheme`s as it is a tryout for me.
if i get good responce i will try to add more sounds to the cab.
the sounds i have added in version 0.01 are:
9"Vista"
8"Starcraft"
7"Licht Saber"
6"Resident3vil"
5"Orgasm"
Keyboard SlidingSound 0.01.cab
the sounds i have added in version 0.02 are:
19"Mo Simpson"
18"Mission Impossible 2"
17"Mission Impossible 1"
16"Homer Simpson"
15"Flanders"
14"Danger"
13"Daffy Duck"
12"Bugz Bunny"
11"Bart Simpson"
10"Apu"
9"Vista"
8"Starcraft"
7"Licht Saber"
6"Resident3vil"
5"Orgasm"
Keyboard SlidingSound 0.02.cab
install at youre own risk.
install to device.
after install, soft reset device.
For those people who want just the original files.
4"HTC Mechanical"
3"HTC Synthetic"
2"HTC Piano"
1"HTC Xylophone"
0"HTC Wind Chimes"
grab this cab --> original SlidingSounds.cab
p.s., i have very little time on my hands.
and if it does not work, just forget this thread.
here is super mario, simpsons, and transformers
thx`s, i will ad them to my next cab.
is the first version working for ya?
Works great...thanks!
ok, created a new Cab
Keyboard SlidingSound 0.02.cab
but most off the sounds sheme`s don`t work on my device.
i dont know why.
so if any one could take a look at it.
i also made an cab with just the original sound sheme`s
original SlidingSounds.cab (not tested yet)
it is realy buggin me why the other sound sheme`s don`t work.
so before i move on i have to figure this problem out.
EDIT: Version 2 is now working.
limited the sound sheme`s to 19 pieces.
had to shorten the sound files but it sounds ok to me.
Big thxs to herg62123
groofoo said:
ok, created a new Cab
Keyboard SlidingSound 0.02.cab
but most off the sounds sheme`s don`t work on my device.
i dont know why.
so if any one could take a look at it.
i also made an cab with just the original sound sheme`s
original SlidingSounds.cab (not tested yet)
it is realy buggin me why the other sound sheme`s don`t work.
so before i move on i have to figure this problem out.
Click to expand...
Click to collapse
looking at it now
1. danger (14) you have an out wav but no in wav in settings
2. the wav files can only be 1 second long....meaning the wav file needs to be about 5 to at most 10 kbs in size. i see larger files than this.
ah, ok.
i will try to shorten them.
And these install to the correct location on the device when you run the cab? (after you select the location to install the cab, of course)
yep.
the soundfiles are going in the windows dir and some reg entries are added.
Works great!
THANKS A TON!!!
ok i just installed this app, after restarting my phone and slide my keyboard on my touch pro, the slider does make a sound, were do i go to change the sound, because its not any of the cool sounds that were advertised with the first link
Thanks Chris
start -> settings -> personal -> keyboard sliding sounds.
there you can select slidingsounds.
i just looked and don't have that on my touch pro
works great on my raphael also on kaiser from my girlfriend (LOL she will be frightened if they want to use the keyboard, they still do not know that there are new sounds installed and i set duffy duck "aaaahahaha" as sliding sound )
Sliding SOunds for Touch Pro
groofoo said:
start -> settings -> personal -> keyboard sliding sounds.
there you can select slidingsounds.
Click to expand...
Click to collapse
I also don't have that option there as well. Did I miss a step or do I have to have a custom Rom to ee that option. I hear the sound when opening and closing my keyboard but there is nowhere to change the sound.
link for Keyboard SlidingSound 0.02.cab is dead
Someone give me it plz
pri5 said:
link for Keyboard SlidingSound 0.02.cab is dead
Someone give me it plz
Click to expand...
Click to collapse
confirmed links are dead can you re upload please.thanks
links had been expired
can somebody upload them again?

Categories

Resources