So, I had another topic about gprs but now I'd really like to know how to force the wifi over gprs. Also how to disable the gprs without deleting the settings ?
No need to make another thread about the same topic which is one below this one.
Best way I have found is in the comm manager disable the data connection and enable wifi, some things like weather and such have issues using wifi for updates, and sometimes I found texts would not go through on just wifi.
Then when your done disable wifi and trigger the gprs to reconnect, just remember not all applications like to work on wifi.
It doesn't work like that. Eve though I disable data connection and enable wifi (which connects ok), phone still insist of connecting to gprs.
Is this really this stupid thing that I must delete my gprs, which I use daily anyway but which is extremely expensive when traveling to other countries and using it there.
Related
Can anyone tell me how this works on the wings.
When using Fring you can actually tell it to conect via wifi etc. but what i want to know is does mesenger do it as well or does it go straight to the gprs. Also when you go online via IE. does it default to the GPRS. I dont see anything that says to use the WIFI conection first and it looks like messenger and IE use the GPRS instead even though i have wifi enabled or am i wrong here.
Thanks ahead
By default, all aplications (IE Mobile, Messaging...) use GPRS, 3G (or other cellular network). If WiFi is on and available, all aplications are using WiFi instead of GPRS. (Only Fring has a bit different connection handling)
What Moneytoo said, only sometimes when I enable WiFi on the phone it wont turn off the data connection so I usually do that manually in the connection manager.
When you are discussing the process of connecting to gprs, I will add one question. Is there a posibillity to initiate 3G/GPRS connection without any app? E.G.: When I want to initiate a connection, I have to use some app which initiates it itself. But there are some, which can't handle this - so I have to for example check my e-mail first (altough I don't need it at the moment) and then the connection stays on and I can use second app. The button in conn manager for data connection is disabled, so I can't use it.
ok
OK thats good to know as i always have the wifi on at home. Just wasnt sure if messenger and IE use it or not as to be honust i dont see any diff. in load speed etc. I would have thought it would work faster via wifi the say gprs.
phailo said:
When you are discussing the process of connecting to gprs, I will add one question. Is there a posibillity to initiate 3G/GPRS connection without any app? E.G.: When I want to initiate a connection, I have to use some app which initiates it itself. But there are some, which can't handle this - so I have to for example check my e-mail first (altough I don't need it at the moment) and then the connection stays on and I can use second app. The button in conn manager for data connection is disabled, so I can't use it.
Click to expand...
Click to collapse
Very true, but I notice (and speculate) that you only cannot select enable or disable the Data connection unless you change or add another connection, or the phone is using it. If I wake up in the morning my phone is using data since I have the HTC home screen with its weather application, hit comm mngr and data is grayed out, but once the phone wakes up or I select Wifi and it starts working again the option to disable data comes up.
For me I just load or refresh the weather page and my data is connected, its set to always be on and since my plan is unlimited I dont worry about it.
NoNco said:
OK thats good to know as i always have the wifi on at home. Just wasnt sure if messenger and IE use it or not as to be honust i dont see any diff. in load speed etc. I would have thought it would work faster via wifi the say gprs.
Click to expand...
Click to collapse
Depends on what you are loading honestly, a page that your mobile browser has to read, compress resize and modefy to display properly will take time to load while it does all of this regardless of how fast your connection is. Could also depend on what others are using your connection for and if your on the B or G standard. Overall I notice a fairly good increase from using Wifi but I am only on Edge here which caps at about 20kb/s where 3g can get into several Mbits/s
I have two questions really..
I live in the Netherlands and have an always-on internet subscription... but when I travel abroad I want to do the following:
1) Turn off all data transfer so I don't get charged for things that want to update or whatever
2) Keep the GPS functioning
Using the connections manager, I turned the data connection off, but this didn't work at all. It would just connect through the phone line anyway. I resorted to deleting all the internet settings from the phone which was a difficult, lengthy and frustrating process, and I ahd to put them all back in when I got home.
Also, after I did that, GPS did not work anymore. I could not find a setting anywhere to turn on or off the GPS by itself... is it linked to the data connection? I couldn't actually turn the data connection on in the connection manager when I deleted the settings... I couldn't access the GPS at all from any program unless I had the data connection on, and working. Is that right, and... isn't that weird?
Yes, it's weird. I faced same problem. Solutions?
To totally prevent data connections, you have 2 choices:
1- remove GPRS/3G configuration from provider
or
2- nodata! That's what I use
About the GPS not working while in fligh mode, I turn on bluetooth and then GPs works
or alternatively rename the access point name...
e.g. mine is "orangeinternet" I stick a character in front "xorangeinternet" and thus it fails to connect if you do accidently start up an app that tries to connect.
I know it works for Orange - cant confirm it with other providers but I suspect it will be the same.
Can anyone else on other provider networks confirm?
nodata is quite handy
Nice, I'll try nodata!
The GPS eludes me though.
Use "Advanced Config 3.2" Available on this site.
Menu->More Settings->Connections
You can disable each network connection. does not affect GPS
To use solely the GPS you need to install a specific GPS enabled stand alone software on your phone, such as TomTom or IGO.
Otherwise you will be using a AGPS data connexion which is expensive abroad.
flykthewiz said:
You can disable each network connection. does not affect GPS
Click to expand...
Click to collapse
actually it does... tomtom7 doesn't work if you're in flight mode (no problem with igo8 thou).
Hello,
on my Diamond, I have e-mail receiving set to "manually" and both weather downloading options unchecked. However, very often, the phone tries to connect to GPRS without asking me for permission. Few days ago, I was playing with my phone, what caused turning off NoData (I dunno why - I have neither turned the Internet profile to "enable" in its settings nor uninstalled NoData). A few moments later, I was VERY suprised to see that.. phone was connected to the GPRS for over 40 minutes! I thought that it'd make my bill like $50 higher. However, it raised my bill for only ~$0,5. I have no idea neither why did it connect nor what did it wanted to do with GPRS connection. Do you have such problems either? What's the matter? How can I fix this so my phone won't want to connect without my demand? Thanks in advance.
NoData should be enough, but I don't know why it reset to enabled if you didn't do this yourself? That said, all it does is toggle some registry settings so perhaps one of the other 'tweak' apps (have you got any installed?) reset the settings...?
Mathew
Yeah, I think that other tweaking apps could make it - that was my first thought. I have Diamond Tweak and Advanced Config installed and I was playing with them, so they could change the settings. My problem though is not to make Diamond unable to connect GPRS - because NoData does everything I want in that matter. I want to know why Diamond wants to connect, while forecast and e-mails checking are off. It'd be great to know that, because maybe then it'd be possible to be sure that (even without NoData) Diamond wouldn't connect to the Internet when we don't want it to do it.
With gprs it's all about the traffic.. the more you download, the more you pay.. I deleted the settings, so it can't connect, even when it wants to.. Only use wifi anyway..
U can enable NoData, but I think it's still possible to manually turn on the connection. NoData won't work then, unless you re-enable and softreset..
djind - oh man, I know how does GPRS work and what do I pay for..
I'll repeat once again, cause I think not everyone got this right. I want to know, WHY does Diamond want to connect to GPRS if it DOESN'T want to download forecast or e-mails. I'd love to have no situations with Diamond trying to connect - without NoData, without deleting settings. Just NO CONNECTING without my CLEAR DEMAND.
Then, please tell me what can make my Diamond want to connect.
You said u were playing around, so opening a page or checking and immediately unchecking weather download or any program using gprs would trigger the connection.. or mayme by accident pressed something..
It's done like that to increase your phone company's income
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Just delete the setting if nothing work, and use wifi...
I actually have unlimited 3G service, so i don't really care if it stayed connected or not (and battery is not really a issue for me..)
djind said:
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Click to expand...
Click to collapse
That's not going to help in this instance. Disabling auto-attachment merely stops the phone resgistering itself as a GPRS-enabled device with the network until it actually requires a data connection to be established. Hence, as soon as the OP's 'rogue app' requests a connection it will get one.
Tigrowski, sorry for the confusion - I was specifically answering your question of how to stop the phone connecting without your demand. I am not aware of an app that could identify this rogue app, but perhaps if you find a packet sniffer that'd give you some clues (i.e. from where the traffic is going, ports etc and, if using cleartext ASCII the actual data being sent).
All said and done though, I think you'd be better of just relying on NoData to put the barrier up as even when you've identified the rogue app you might not be able to make it behave. Besides which there'll likely be another one round the corner wanting to connect when it feels like it! (that was one of the reasons behind why NoData was developed, particularly for roaming users given the significant financial impact of out-of-control network-enabled apps)
Mathew
P.S. It's not QuickGPS periodically downloading almanac data is it? (check the setting as this can be controlled, although it should only be doing so weekly anyway)
Hi,
I have a small problem which I hope there already is a solution to.
When I use the GPRS/Edge it costs me about $3/MB so of course I don't want to use it when not necessary.
The problem is that when using Wifi if the connection is lost the phone can switch to GPRS/Edge without me knowing which can be expensive. Is there a program or setting of some sort so I have to "press ok" each time I want to use GPRS?
I can change the settings so I always use Wifi but then I have to change the settings every time I want to use GPRS.
In short:
Default should be Wifi and if Wifi is not available I want the phone to switch to GPRS after I have "pressed ok".
There is an app called 'NoData' which will totally disable GPRS for you.
Of course, when you want to use the GPRS, you simply toggle it back on and away you go.
Can't remember where I found it now, but it's around the site somewhere. Maybe search in the development and hacking forum??
I believe it is also built in to some of the custom ROMs already.
indeed, its called nodata from modaco...
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
Gang:
I might have dropped my phone (or not).
But, it now won't connect on the 3G signal, (EDGE and GPRS seem to work).
It constantly is seeking the 3G connection "overruling" the EDGE and GPRS connections so I'm constantly missing calls and lose connections (both data and voice).
Is there a way to block the 3G connection (so it will connect on, and stay connected on, the EDGE and/or GPRS signals)? I'm over my head here, but perhaps in the registry?
For bonus: if anyone knows how to fix the 3G connection, let me know too. It "connects", but can't use data or phone in or out.
Thanks in advance.
Eric
did the options search provided not work?
ChumleyEX said:
did the options search provided not work?
Click to expand...
Click to collapse
Options search? Need a bit more. What's that please?
that's the stuff you got when you searched your problem.. Which is part of the rules, you need to try and figure out how to solve your problem on your own..
Go to your Comm Manager, there should be an option to toggle off 3G.