Has anyone gotten their diamond to work successfully with z-push? There seems to be a problem with the diamond not sending authentication for every ping request, and therefore push not working.
This thread (http://z-push.sourceforge.net/phpbb/viewtopic.php?f=2&t=198) seems to isolate the issue to the latest wm 6.1 devices with direct push enabled. I can confirm that a wm 6 blackjack 2 operates without issue.
Has anyone faced this? Does anyone know how to make the diamond behave like a wm6 devices in terms of authenticating pings?
It would seem one guy managed to tweak z-push to receive those pings correctly(http://z-push.sourceforge.net/phpbb/viewtopic.php?f=2&t=198&start=10#p1272), but he only explains his solution, he doesn't provide the patch, and I'm not familiar enough with memcached to use it.
Maybe someone else will read his explanation and implement it?
Here's hoping (and wihtout the security issue mentioned on that board). I just find it strange that a WM 6.1 Tytn II is listed among the working devices, but the 6.1 diamond fails to authenticate pings. I was hoping there was a tweak or registiry trick available for correcting this.
I have a wm6.1 tytn2, and I can confirm it doesn't work. I'd think it's a rom issue.
i stand corrected, i thought i read somewhere on the z-push forum that the tytn 2 with 6.1 worked.
i'm running bepe .99 right now, but i will test dutty and swifts versions and report back
Ive ran z-push before with my diamond without issue. I didnt know about any ping issue, but then I didnt continue to use it. BTW, my name on there is the same as on here, and I wrote an entire how to install.
did push work for you? z-push does indeed work on the diamond, but there is no push functionality. instead, it will sync up every so often. if push worked for you, i would really like to know what, if anything, is different between your phone and mine
z-push is still running here on my root server... syncing to my diamond is no problem...
Unchained said:
z-push is still running here on my root server... syncing to my diamond is no problem...
Click to expand...
Click to collapse
Does it push? can you check your debug log for a ping request from the diamond? if it does push and you are successfully passing the ping command, can you tell us what rom you're using? diam100 i presume?
bigwill3 said:
Does it push? can you check your debug log for a ping request from the diamond? if it does push and you are successfully passing the ping command, can you tell us what rom you're using? diam100 i presume?
Click to expand...
Click to collapse
Code:
07/31/08 08:20:31 Client supports version 2.5
07/31/08 08:20:31 IMAP connection opened sucessfully
07/31/08 08:20:31 POST cmd: Ping
07/31/08 08:20:31 Ping received
07/31/08 08:20:31 Waiting for changes... (lifetime 780)
I tried GER Roms O2 1.39, O2 1.93, HTC 1.93 and all bepe ROM; no problem there. Device is diam100; as u presumed..
But note; I am using z-push 1.1.1; not the current version... the actuall version isnt pushing here... But never looked, whats buggy there... Switched back to the old one.
Unchained said:
Code:
07/31/08 08:20:31 Client supports version 2.5
07/31/08 08:20:31 IMAP connection opened sucessfully
07/31/08 08:20:31 POST cmd: Ping
07/31/08 08:20:31 Ping received
07/31/08 08:20:31 Waiting for changes... (lifetime 780)
I tried GER Roms O2 1.39, O2 1.93, HTC 1.93 and all bepe ROM; no problem there. Device is diam100; as u presumed..
But note; I am using z-push 1.1.1; not the current version... the actuall version isnt pushing here... But never looked, whats buggy there... Switched back to the old one.
Click to expand...
Click to collapse
Thank you! I will test 1.1.1 and report.
no ping with 1.1.1. all other things being equal, it must be a rom issue. i will test with different roms and report my findings. any ohter input would be greatly appreciated
What about the log??
Unchained said:
What about the log??
Click to expand...
Click to collapse
that's how i determined that no ping is being successfully passed. it simply spits out:
09/23/08 14:58:01 Start
09/23/08 14:58:01 Z-Push version: 1.1.1
09/23/08 14:58:01 Client supports version 2.5
09/23/08 14:58:02 IMAP connection opened sucessfully
09/23/08 14:58:02 IMAP connection closed
09/23/08 14:58:02 end
nothing else. i do get email, but it appears to operate on a schedule instead of as it arrives (which the phone is set to)
success on duttys 2.2 (today's build). it must have been bepe .99 that was hanging me up (though I love bepe and wish he would continue development).
i'm going to test with z-push 1.2 and report
Related
i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...
Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC
i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well
does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!
I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip
On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone
hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC
BB Connect from HTC
Anyone have tried this ?
[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC
750V with Vodafone WM6.
Now it flashes with an IP for about a second.
For many of us having BBC running is imperative for our proper "being connected".
RIM choose to be strict on blocking "unsupported" devices and BBC client versions. There is 2 major releases of Blackberry Connect - BC client version 2.X is stable, but limited on features and version 4.X, which has few welcomed additions, but also introduces quite few annoying problems. In this thread we can share our findings, which are either specific to Kaiser / Tilt or do apply to any device.
As a thread starter, I'll bring in the good news for those interested in making BBC2.X running on Kaiser / Tilt - it's simple. In addition to my signature's HEXing of any current WM6 .nbh ROM files, one would simply replace the unicode string "HTC-Kaiser" to "HTC-Hermes" , reflash, change the Aku string to .2.3.0 and BBC2 will work as a charm.
BBC threads collection:
=================
http://forum.xda-developers.com/showthread.php?t=294218
http://forum.xda-developers.com/showthread.php?t=409964
http://forum.xda-developers.com/showthread.php?t=395390
And if you aren't comfortable hex-editing your ROM, the 4.x version of BBC is supported on the Kaiser and Tilt. See these threads for more information.
http://forum.xda-developers.com/showthread.php?t=327695&highlight=blackberry
http://forum.xda-developers.com/showthread.php?t=330910&highlight=blackberry
HELP!! Blackberry Connect NOT working
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Connected. You just have to get provisioned.
jvloyola said:
Hello I have tried to get the BBC 4 working on my kaiser without success, on the kaiser I get a Pin Assigned, service connected and all but I don't get ANY email, the lookups all fail, the email I send from the Kaiser don't get sent but I don't get any error messages.
When I check the Blackberry connect desktop I see that it says PIN: unknown type, if I sync the device again I get a success message but again an unknown pin type
I'm using:
HTC Original ROM
Blackberry Version: 4.0.0.84
Transport Version: 4.0.0.86
Blackberry Enterprise Server: 4.1.2
System Version 77.122.174.117
I am on a coporate BES, which officially doesn't support BBC, is there any way they can block BBC devices?
Please any help will be greatly appreciated.
Thanks!!
Vinny
Click to expand...
Click to collapse
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
HExing you should be able to make any BBC client to connect on Hermes or Kaiser/Tilt with any current WM6 ROM.
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
hidefguy said:
Does any have a bb connect working (BES) on any of the upgraded roms? Tried version .84 and .90 on helmis big storage rom and it would connect for a second and then disconnect. So i switched back to the HTC Rom.
by the way i'm using 4.0.0.84. without any problems.
Click to expand...
Click to collapse
I've found a solution to the problem you describe - see my post here:
http://forum.xda-developers.com/showpost.php?p=1608560&postcount=7
Problems getting provisioned
moisha said:
Connected. You just have to get provisioned.
Click to expand...
Click to collapse
That is precisely the problem when aI try to provision my kaiser via BBC Destop I get a sucess mesage but nothing happens, and every time I connect the kaiser says your email is set up for pin "unknown" do you wan to chang it to pin XXXXX?
So I guess I'm not getting provisioned right.
Any ideas?
Vinny
Hello moisha,
i am a bit confused. I had Blackberry 2.1.x running on my Hermes with a patched WM 6 Version. Now I try to implement it myself on my new Kaiser (t-mobile Germany). So far I followd the instructions under
I have not been successful so far. You recommend just to hex HTC-Kaiser to HTC-Hermes. I tried with Hexedit but could not find the string in the nbh file. I use the HTC German ROM for Kaiser (KaiserHTC_GER_1.56.407.3Reconstructed). Can you give me some more hints, how to proceed ???
Thanks ...
Hi,
Please can someone talk me through trying to get BB Connect 4 working with the new HTC S730 (Wings)?
I'm trying to move across from a BlackBerry Pearl, so I know my subscription with my operator (Telenor Sweden) is working just fine.
I've tried using BBC 4.0.0.76 and 4.0.0.84 for WM6 Standard.
I enter BBC app on the phone and click Menu > Register Now. Back on the home page the BB status changes from Not Connected > Network Available > Data Tunnel Available > Not Connected. I have no PIN (Pending) and no IP.
I also tried BBC 2.1.2.39 but this just stays at Not Connected. Any idea why this is not working, since BBC 2 is not supposed to be so fussy about checking if the device is supported?
When I try to connect with the BBC Desktop software, it says PIN is "Unknown Type"
So....
I'm guessing the S730 isn't certified by RIM yet and I need to trick BBC 4 into thinking it's running on a supported device.
Please can someone help with the correct steps? Here are some of my questions:
1. I have the S730 Nordic version so I guess the first thing I need to do is dump the ROM from my own device. Am I better off using the grab_it ROM dumper from here - http://forum.xda-developers.com/showthread.php?t=238945 or using this method http://wiki.xda-developers.com/index...x_HowToDumpRom ? I'm struggling so far with the pdocread method as I my device seems to be application locked. I'll post more about this in the S730 ROM thread.
2. Assuming I get the ROM dump, I need to use a Hex Editor to change the GetDeviceInfo from HTC-Wings ( I guess) to a supported device. Can anyone tell me the best device to change this to e.g. HTC-Vox? I've read reports of BBC 4.0 working on the S710 Vox but also people have asked for help hacking it. Which device string should I use?
3. I'm a complete noob when it comes to repacking ROMs and flashing WM devices. Can anyone point me to step-by-step guide to this?
I've tried to read around this subject but I've quickly exceeded my technical comfort zone to put it mildly, so any help with this would be really appreciated!
You carrier needs to support the Blackberry Gateway forwarding. If it does not, from your device, then Blackberry Connect will not work. They literally need to sort of "open ports" on their system.
I tried a Blackberry Connect activation on a Samsung BlackJack II, on AT&T here in the states, with no luck. Same symptoms as you describe.
Read all of the comments here to see what other people have done.
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Good luck,
Matt
I'm not ready to give up on the S730 and BB Connect just yet.
My operator supports BB Connect on Sony Ericsson and Nokia smartphones but say there is no reason why HTC models shouldn't work. I have a colleague with a HTC Tytn II, also with Telenor connecting perfectly with my company BES, so there is some hope.
The hack described in this thread http://forum.xda-developers.com/showthread.php?t=294218 basically tricks BBC into thinking it's running on a device which is supported by RIM and your operator. That's what I'm trying to do. That's where I was going with my questions.
But I don't know a) how to dump my ROM b) what devicetype value to set and c) how to repack the ROM and reflash the device.
Has anyone else tried the same thing and can help a noob like me?
bigflavor said:
Oh well... get your peoples to enable ActiveSync on your server. Or at least to forward your Email to an outside address.
Click to expand...
Click to collapse
Not an option for me, unfortunately. My company only support BES and so either I get BBC working or the S730 goes up on ebay. I'm back to using my Pearl until I get this working.
Is there anyone else out there trying to get BlackBerry Connect working on the S730?
also trying for BB connect
I just tried to install three different version yesterday with no success.
4.0.0.76 (wm5 version)
4.0.0.84 (wm6)
4.0.0.91 (wm6)
http://www.sems.org/entry.asp?ENTRY_ID=276
They all installed properly but did not generate a PIN number, it was stuck at "PIN pending".
It went thru the same sequence "Network Available" --> "Data Tunnel Available" --> "Not Connected"
have not tried version 2.1 yet will do that shortly
Tried 2.1
update:
Tried 2.1 on the s730, it does not function.
If anyone has anymore ideas please post, and i will try it .
I know this is a separate platform, but perhaps bbconnect for the HTC tilt might work. AT&T have it available here http://www.america.htc.com/mobile/connect/8925/
Has anyone tried emoze as a push solution?
Has anyone found a working BB Client for BB Internet Service for The S730?
I see over the years ... nobody read carefull Threads!
Black Berry is a complicate and secure Application!
How they generate a Pin?
The Device Name, Device OS Version and Build Nr. are for the generation importent. It means ... if your modded os have a wrong OS Version and Build Nr. you doesnt get a Pin and you see every time "Pin pending"
How i can fix this?
Try to use a Original HTC Rom. If you get Pin Pending again ... try to reg edit your Build Nr. If its work, you have the right version Nr.s you need and Build Nr.! Then you can ask you favorit Rom Builder for changing does numbers.
Use Black Berry Connect Clients over 4.0.0.90
If you know the right ids ... publish it!
But where can I get the right rom for my HTC S730 and where can I get a BB client over 4.0.0.90
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
NetrunnerAT said:
Original Rom ... www.htc.com -> eMember
Black Berry Client ... netrunnerat.4shared.com -> tools
Click to expand...
Click to collapse
That's a cool site. Thanks.
Also, did you test this on the S730 with your theory?
It dosn't work. No PIN.
New Ideas ?
your carrier needs to allow your phone to access the Blackberry servers. It's a provisioning thing. Call them and try to get it added... try to convince them just to add it and see what happens, even if you don't have a Blackberry. They might have a special thing... like AT&T's Tilt has the ability to use blackberry connect, so AT&T probably has some special feature for provisioning that enables a non-blackberry phone to be provisioned for blackberry service.
Without this connection allowed by your carrier connecting you to RIM's servers... Blackberry Connect will not work.
Prove me wrong. (seriously, because I want to get this working for myself )
I have the blackberry connect service activated for my s730 but can not get a pin number. I will try different versions, if anyone has anymore ideas please post
Thanks
So I'd like to flash a cooked ROM on to my Tilt, but I'd like to keep the functionality of BlackBerry Connect for work, which ROM will do this? My other concern is that I hear there is a way to hack the phone that will let me have BBC and MediaNet running at the same time as necessary, the whole disconnect this to get to that and vice versa has been my main annoyance with BBC because I can't get my IMAP mail when BBC is running.
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
twinpeaks said:
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
Click to expand...
Click to collapse
From what I've been able to determine, this is a fault of BBC rather than the ROM. I went backwards one step and don't have that problem any more. I really didn't see a difference between the 2 BBC versions except the dreaded screen on email receipt.
twinpeaks said:
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
Click to expand...
Click to collapse
Sounds good, I usually read the emails as they arrive since I work in IT so I'll think of it as an accidental blessing. But what about multiple data connections. Having to suspend BBC has been getting on my nerves for a while now. :/
No one has answer?
tribalmunky said:
Sounds good, I usually read the emails as they arrive since I work in IT so I'll think of it as an accidental blessing. But what about multiple data connections. Having to suspend BBC has been getting on my nerves for a while now. :/
Click to expand...
Click to collapse
WM6.1 allows muliple simultaneous data connections. This is nice when you have BBC running and another app like Weather Panel that relies on internet updates.
u have to flash a rom that has the modification made in the provisioning xml document. it is not cuz of wm6.1 but rather the change for vpns has to be cooked in.
search the rom dev forum.
Death v3.5, and Dutty's 04/29 all do simultaneous data for me Laurentius L26 v4 did also but it was very flaky .. lots of "answering modem has disconnected" type messages I gave up on it
thesire said:
u have to flash a rom that has the modification made in the provisioning xml document. it is not cuz of wm6.1 but rather the change for vpns has to be cooked in.
search the rom dev forum.
Click to expand...
Click to collapse
OK, so then I could just download my cooked ROM of choice and make that edit before I flash my Tilt? Sounds simple enough. Thanks!
Thanks for everyone's help. I loaded up Death's 3.5 and it's working as I hoped. 2 simultaneous connections and it seems to be working great!
Twinpeaks, my device doesn't turn on when I get mail, so maybe I'm lucky?
As per the original thread over on PPC Geeks http://forum.ppcgeeks.com/showthread.php?t=92493
pixelwix said:
So I was the sprint store last night checking out the HERO, right next to it was the Samsung Intrepid it had the TellMe app on there so copied the install.exe file on to my tp2 to see if it would install. I can get it to install but the app wount launch. anyone wanna give it ago to see if they can get it working?
*update*
I guess to get it working you need to have netcf 3.5 installed to make it work.
some are saying touch works, some are saying it doesn. I guess its hit or miss.
get netcf 3.5 here --> http://forum.ppcgeeks.com/showpost.php?p=1263153&postcount=9
Click to expand...
Click to collapse
I've myself not been able to get this working on my fuze. My thoughts are it might be dependant on running WM 6.5. I've tried killing a bunch of processes before installing. Turned off Voicecommand, everything and no go. My hopes are someone here can figure out how to ge this thing working on our phones.... at least the phones running WM 6.1. For all of you running WM 6.5, I'm jealous!
When I try speak, my phone says "Thinking...." and always "Sorry didn't catch that"
EDIT: So I tried Text *persons name* and it worked, but when I spoke my message it said unable to reach network.
What Rom version are you running?
Amnya over at PPCgeeks posted this cab file. I installed it and low and behold the programs now on the phone. That said, I cant do much with it. Any search I try just comes back with a network error, same with sending a text message "can't access mobile network"
I got it to work on mine. I had to DL the newest ROM from HTC, but it is working flawless now.
I couldnt get it to start before I updated.
Still trying to get it to work..
comawhite12 said:
I got it to work on mine. I had to DL the newest ROM from HTC, but it is working flawless now.
I couldnt get it to start before I updated.
Click to expand...
Click to collapse
What are you using? What Rom? etc
Aaron McCarthy said:
I've myself not been able to get this working on my fuze. My thoughts are it might be dependant on running WM 6.5. I've tried killing a bunch of processes before installing. Turned off Voicecommand, everything and no go. My hopes are someone here can figure out how to ge this thing working on our phones.... at least the phones running WM 6.1. For all of you running WM 6.5, I'm jealous!
Click to expand...
Click to collapse
I can only get it to work using the internet from activesync and wifi. Otherwise it won't connect on MediaNet....any ideas?
noellenchris said:
I can only get it to work using the internet from activesync and wifi. Otherwise it won't connect on MediaNet....any ideas?
Click to expand...
Click to collapse
None as of yet... My original thoughts were that it was 6.5 dependant... but it would seem its actually network dependant and thats why it had issues installing from the original exe. It would get to where it needed the network confirmation and fail.
I'll be reading other forums and post back here as soon as I see something relevant