Database Develop

Anyone get Logmein to work via Kaiser?

I'm getting to the connection page but then it goes back to the sign in.

Working great on my phone.

can you attach the ractrl.cab you used?

Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.

trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib

I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.

Your in luck mate, I found the file. But I cant find away to upload it here.

yeah, connecting to logmein and installing the cab directly from website works great!

Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.

I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.

When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.

avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...

After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...

After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm

On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me

Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG

TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.

If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.

Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.

jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.

GoodLink

So has anyone been able to fix this problem of not being able to use Good on the Tilt?
I've heard a patch may be coming from HTC but nothing confirmed.
Just wondering if anyone else has had any luck with this.
Thanks

You might do a search over on the Wizard WM6 forum. There was discussion about Goodlink and people trying to get it to work on WM6 there. I seem to recall there may have been a workaround but not sure.

I use goodlink on my Tilt and it works fine. Is there anything specific you are having trouble with? Such as installation or the running of the application... maybe I could help.

Good is great on Tilt
I'm using Good on my Tilt as well. I've actually had less problems on this device using Good than on my previous 2.
Just because the Good icon isn't in your program folder like it was on the 8525, don't be alarmed. You don't need the 'Get Good' icon to actually get Good. What I suggest you do is hard reset and then go to get.good.com with your browser. I find that when Good is the first piece of software installed, it works best because it really takes over a lot of the phone so that's why if you've loaded up a bunch of apps, it might be wise to start completely over with a fresh install.
Download the little installer app from that site and then run it, put in your email address and a your code, which is sent by your IT dept and then let the install run uninterrupted for about 20-30 min. You should have NO problems with it.
FWIW, when I called my IT dept to let them know I bought a new device and needed to get a new code from the good server he said to me 'you know Good won't work on a Mobile 6 device, don't you?' He was wrong, I knew he was wrong, and then I just told him it was Mobile 5 so he'd just send it.

Allright I'll give it a shot.
I already downloaded the Good cab as it didn't give me an incompatable message. Problem now is when I try to install it, the server is down so I'll try again in a bit.
Thanks

i installed goodlink on my kaiser and it's working fine too.
good luck.

Thanks.
Still getting the server error but I'll keep trying

Well I'm still getting the server error so I guess its not going to work for me this way. I'm thinking about trying the hard reset and going for it again...
Don't really seem to have any other options...

Telenav problem..

Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.

I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.

ok
What are your connections settings, are you on medianet?

liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.

gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?

still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..

Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt

yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.

liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.

yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went

liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.

thanks!!
lol it did fix it..thanks

liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.

ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol

liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?

I have a problem with Shapeservices IM+

I have version 4.57 and my message box where I type is messed up. I can't see what I type. I've attached a picture for example. I tried different versions but all is still the same. Is it my ROM? I have udKs 8.0..Duttys ROM worked fine but I changed to udK...I even tried hard resetting but still the same problem...anyone has this problem?
nothing comes close to IM+ ..only Agile is #1 i'd say... and Slick messenger doesnt have mobile buddys for AIM...
thanks!

No replies eh? Shame because I have the exact same problem.

contentryder said:
II even tried hard resetting but still the same problem...
thanks!
Click to expand...
Click to collapse
Well, if you DID hard reset and still have the same problem, then it must be your ROM. I don't have this kinda of issue so far.
BTW, 4.58 is released.

Nghiem, I tried 4.58 and I got the same results.
Anyway, I'm moving on to JiveTalk now.

It's the rom. Something with the OS is not meshing well with IM+. In my experience IM+ will only work with WM6.1 OS version 19170 and 19716 and older. There are also some hybrid roms that are based on 19716 where IM+ may work, but I personally have not tested them.
I currently use my own cleaned up version of 3.02 with 19170 OS and all my programs work great. Hope this helps.

I'm having this problem too... I've been using IM+ for quite a while with WM5 rom and it did ran smoothly without any problem. Just I upgraded to WM6.1 rom, I can't use IM+ anymore: everytime when I click on someone to open up the message box, the program just shuts down, I never can type any message to anyone
I hope there'll be a way to fix this problem soon coz' I like IM+ and don't wanna downgrade my machine!

try dutty's new 19700 build,works fine with that

The new version (currently in beta) might work better. Check their website to see if it's put up yet.

I'm using WM6 so far, so I haven't seen any problems, but those of you who are, can you turn on debugging/logging and send Shape Services the log files, if it creates some?
They're pretty good about helping, albeit they are sometimes a little slow to respond. I used IM+ on my Palm for quite a while and worked with them several times over bugs.

outphase said:
The new version (currently in beta) might work better. Check their website to see if it's put up yet.
Click to expand...
Click to collapse
this is known bug, i've reported it weeks ago... and there is a beta floating around that works perfectly... if you know how to use google then you can find what your looking for...
hint** search for implus_ppc_5-1.cab

I really want to use my IM+ on my HTC diamond!!! Anybody can help ?

oscarbb said:
I really want to use my IM+ on my HTC diamond!!! Anybody can help ?
Click to expand...
Click to collapse
You ask Shape Services yet?

Does Pandora work for WM6.1?

I went to the m.pandora.com page on my Tilt and it said that it doesn't surport my version of phone

You can't use the website you have got to use the CAB file (attached)

I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?

Thank you I'll give it a try

kemp509 said:
I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?
Click to expand...
Click to collapse
Yes, install the program then go online to register (not through your phone, but a computer) and then you enter your login information into the phone and you're all set.

I used it...it's not bad but it runs at about 96kbs and it can be slow to load between songs....probably because of my crappy connection around here

When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?

can't help to much but
I am running 6.1 and Pandora works great I love it might try a few different radios as you might get a faster better connection.

EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though

kaiserII101 said:
EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though
Click to expand...
Click to collapse
I'm using it on tmobile edge and all is well

worked on att with pheonix rom
fits screen and touch works

Just installed it on my Tilt 6.1 with HyperDragon III Blackstone. Works great. I listen to Pandora all day at work.

KonAitor said:
When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?
Click to expand...
Click to collapse
Exact same thing here. I am using HTC's win mo 6.1 rom upgrade.

using it with 6.1. Um, it works really well but sometimes if I hit stop the song won't stop playing. So from there I try to close the program but can't. So then I go to the task manager and close the program... and the song still keeps on playing after the program has been closed! I end up having to reboot the phone to make it stop! lol! It doesn't happen all the time, just a few times, but still is very annoying.

been looking for this for a while now. Big up's to XDA

Works great for me, love it! Just wish it wouldn't stop periodically to ask me if I'm still listening...

kaiserII101 said:
You can't use the website you have got to use the CAB file (attached)
Click to expand...
Click to collapse
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.

SpeedCheeser said:
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.
Click to expand...
Click to collapse
I have it working on mine

6.5?
Does this work with Win 6.5? I keep getting connection errors on 3G and WiFi.

I'm running WM 6.1 and i keep getting debug errors and once i finally get past that issue it just sits at the Pandora blue screen and doesnt do anything. Anyone know of a fix for this?