I went to the m.pandora.com page on my Tilt and it said that it doesn't surport my version of phone
You can't use the website you have got to use the CAB file (attached)
I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?
Thank you I'll give it a try
kemp509 said:
I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?
Click to expand...
Click to collapse
Yes, install the program then go online to register (not through your phone, but a computer) and then you enter your login information into the phone and you're all set.
I used it...it's not bad but it runs at about 96kbs and it can be slow to load between songs....probably because of my crappy connection around here
When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?
can't help to much but
I am running 6.1 and Pandora works great I love it might try a few different radios as you might get a faster better connection.
EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though
kaiserII101 said:
EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though
Click to expand...
Click to collapse
I'm using it on tmobile edge and all is well
worked on att with pheonix rom
fits screen and touch works
Just installed it on my Tilt 6.1 with HyperDragon III Blackstone. Works great. I listen to Pandora all day at work.
KonAitor said:
When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?
Click to expand...
Click to collapse
Exact same thing here. I am using HTC's win mo 6.1 rom upgrade.
using it with 6.1. Um, it works really well but sometimes if I hit stop the song won't stop playing. So from there I try to close the program but can't. So then I go to the task manager and close the program... and the song still keeps on playing after the program has been closed! I end up having to reboot the phone to make it stop! lol! It doesn't happen all the time, just a few times, but still is very annoying.
been looking for this for a while now. Big up's to XDA
Works great for me, love it! Just wish it wouldn't stop periodically to ask me if I'm still listening...
kaiserII101 said:
You can't use the website you have got to use the CAB file (attached)
Click to expand...
Click to collapse
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.
SpeedCheeser said:
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.
Click to expand...
Click to collapse
I have it working on mine
6.5?
Does this work with Win 6.5? I keep getting connection errors on 3G and WiFi.
I'm running WM 6.1 and i keep getting debug errors and once i finally get past that issue it just sits at the Pandora blue screen and doesnt do anything. Anyone know of a fix for this?
Related
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?
I have version 4.57 and my message box where I type is messed up. I can't see what I type. I've attached a picture for example. I tried different versions but all is still the same. Is it my ROM? I have udKs 8.0..Duttys ROM worked fine but I changed to udK...I even tried hard resetting but still the same problem...anyone has this problem?
nothing comes close to IM+ ..only Agile is #1 i'd say... and Slick messenger doesnt have mobile buddys for AIM...
thanks!
No replies eh? Shame because I have the exact same problem.
contentryder said:
II even tried hard resetting but still the same problem...
thanks!
Click to expand...
Click to collapse
Well, if you DID hard reset and still have the same problem, then it must be your ROM. I don't have this kinda of issue so far.
BTW, 4.58 is released.
Nghiem, I tried 4.58 and I got the same results.
Anyway, I'm moving on to JiveTalk now.
It's the rom. Something with the OS is not meshing well with IM+. In my experience IM+ will only work with WM6.1 OS version 19170 and 19716 and older. There are also some hybrid roms that are based on 19716 where IM+ may work, but I personally have not tested them.
I currently use my own cleaned up version of 3.02 with 19170 OS and all my programs work great. Hope this helps.
I'm having this problem too... I've been using IM+ for quite a while with WM5 rom and it did ran smoothly without any problem. Just I upgraded to WM6.1 rom, I can't use IM+ anymore: everytime when I click on someone to open up the message box, the program just shuts down, I never can type any message to anyone
I hope there'll be a way to fix this problem soon coz' I like IM+ and don't wanna downgrade my machine!
try dutty's new 19700 build,works fine with that
The new version (currently in beta) might work better. Check their website to see if it's put up yet.
I'm using WM6 so far, so I haven't seen any problems, but those of you who are, can you turn on debugging/logging and send Shape Services the log files, if it creates some?
They're pretty good about helping, albeit they are sometimes a little slow to respond. I used IM+ on my Palm for quite a while and worked with them several times over bugs.
outphase said:
The new version (currently in beta) might work better. Check their website to see if it's put up yet.
Click to expand...
Click to collapse
this is known bug, i've reported it weeks ago... and there is a beta floating around that works perfectly... if you know how to use google then you can find what your looking for...
hint** search for implus_ppc_5-1.cab
I really want to use my IM+ on my HTC diamond!!! Anybody can help ?
oscarbb said:
I really want to use my IM+ on my HTC diamond!!! Anybody can help ?
Click to expand...
Click to collapse
You ask Shape Services yet?
Hi,
I`m facing this weird situation: Destinator (7.0.0.588.11) does not load if phone is on, after the splash screen it just closes (leaving a bar near the battery icon).
I'm using Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (radio 1.65.14.06) but this problem also happened before with OEM 6.0 ROM.
If I turn phone off, Destinator loads fine.... It worked for weeks, but now I just cannot use Destinator...
Any clues ?
I have a similar problem with Garmin Mobile XT
It doesn't load if GPRS/EDGE is configured
try just removing any GPRS/EDGE connection and loading it
if it works, you have the same problem as me
but I didn't find any solution yet
Yes, runs ok with gsm off, even if I reinstall it would not run with phone on....
I'm having the same issues, but turning the phone off solves as you mentioned. At least there is some solution!
Do you guys think a radio downgrade would solve this issue ?
dunha said:
Do you guys think a radio downgrade would solve this issue ?
Click to expand...
Click to collapse
hm, that's a good idea
please let us know if you try that and it works
IGO my way 2006
It`s also happening with iGO my way plus 2006. Any ideas ?
Changed ROM but still crashing...
I'm now using L26 V9 but the problem persists. I think Destinator freezes when loading GPS, because yellow led does not blink at this time.
If I turn phone off, Destinator works fine...Any ideas ?
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
u are the reason that iam using destinator7 to my xperia phone
thanks man
jesus love u !
Destinator PN and AT&T Tilt
I have to say that I had been struggling with this program shutting down on my Tilt since 9/09, after having worked for more than a year. I resorted to using an old handheld device to navigate to new destinations while driving, something I do regularly as a social worker. And finally today, after doing much searching on the Internet and attempting different fixes, it appears the solution of deleting sms file is the answer. Thank you very much.
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
Seriously, marry me
I've given up using Destinator for months because I couldn't figure out what the hell was wrong and I installed iGo instead (which I don't like much).
THANKS MAN!!!
jiannist said:
I just found the solution: Just delete SMSModule.dll in DestinatorApps/Destinator and it should work.
Click to expand...
Click to collapse
Seriously, marry her^^^
and i'll be the best man...
Thank you dude. As far as i am concerned. you rule the universe!!!
Really good man! Do we know why does that happens? I just like to be informed indeapth.
As per the original thread over on PPC Geeks http://forum.ppcgeeks.com/showthread.php?t=92493
pixelwix said:
So I was the sprint store last night checking out the HERO, right next to it was the Samsung Intrepid it had the TellMe app on there so copied the install.exe file on to my tp2 to see if it would install. I can get it to install but the app wount launch. anyone wanna give it ago to see if they can get it working?
*update*
I guess to get it working you need to have netcf 3.5 installed to make it work.
some are saying touch works, some are saying it doesn. I guess its hit or miss.
get netcf 3.5 here --> http://forum.ppcgeeks.com/showpost.php?p=1263153&postcount=9
Click to expand...
Click to collapse
I've myself not been able to get this working on my fuze. My thoughts are it might be dependant on running WM 6.5. I've tried killing a bunch of processes before installing. Turned off Voicecommand, everything and no go. My hopes are someone here can figure out how to ge this thing working on our phones.... at least the phones running WM 6.1. For all of you running WM 6.5, I'm jealous!
When I try speak, my phone says "Thinking...." and always "Sorry didn't catch that"
EDIT: So I tried Text *persons name* and it worked, but when I spoke my message it said unable to reach network.
What Rom version are you running?
Amnya over at PPCgeeks posted this cab file. I installed it and low and behold the programs now on the phone. That said, I cant do much with it. Any search I try just comes back with a network error, same with sending a text message "can't access mobile network"
I got it to work on mine. I had to DL the newest ROM from HTC, but it is working flawless now.
I couldnt get it to start before I updated.
Still trying to get it to work..
comawhite12 said:
I got it to work on mine. I had to DL the newest ROM from HTC, but it is working flawless now.
I couldnt get it to start before I updated.
Click to expand...
Click to collapse
What are you using? What Rom? etc
Aaron McCarthy said:
I've myself not been able to get this working on my fuze. My thoughts are it might be dependant on running WM 6.5. I've tried killing a bunch of processes before installing. Turned off Voicecommand, everything and no go. My hopes are someone here can figure out how to ge this thing working on our phones.... at least the phones running WM 6.1. For all of you running WM 6.5, I'm jealous!
Click to expand...
Click to collapse
I can only get it to work using the internet from activesync and wifi. Otherwise it won't connect on MediaNet....any ideas?
noellenchris said:
I can only get it to work using the internet from activesync and wifi. Otherwise it won't connect on MediaNet....any ideas?
Click to expand...
Click to collapse
None as of yet... My original thoughts were that it was 6.5 dependant... but it would seem its actually network dependant and thats why it had issues installing from the original exe. It would get to where it needed the network confirmation and fail.
I'll be reading other forums and post back here as soon as I see something relevant