Related
THIS IS NOT A FIX, JUST A WORKAROUND FOR PEOPLE WHO REALLY WANT TO WATCH GOOD QUALITY MOVIES ON THEIR KAISER
SOME CONVERTING MAY BE REQUIRED
Hi All,
I'm posting this to try and help people who are in this large boat of people claiming their TyTN II plays movies terribly.
I know it's all over the forum at the minute, the fact that people can't seem to play movies on their TyTN II, however I experience more than acceptable movie performance, and this is what I do:
I ensure my movies are .avi (if not, I use Kingdia Video Converter which works wonders)
I then Shrink the videos down to QVGA size (using Ashampoo Movie Shrink & Burn). This ensures that the file size is small, and quality is adjusted for that "just right" viewing size on the phone screen.
And to play them I use TCPMP with the FLV 0.4.2 plugin. Using the settings below:
in "Select Page" > "Buffering" configure it to match the following:
Normal buffer size: 1148KB
Preload at underrun: 5%
Preload for audio: 64KB
Also, if you are experiencing any "out-of-sync" audio, to remove any Lag, navigate to 'Select Page -> Advanced' and set 'Manual A/V offset +/-' to anywhere between'-100 to -300' (fiddle with it untill it's how you want it).
Now i could be getting this all wrong, and my idea of "Good quality Movie Playback" is not actually good quality. However, can I please suggest someone tries my methods above and post's their thoughts? And if you already use the setup above, what do you think?
My personal complaints on the Kaiser's movie playback are to do with the playing of the ripped DVDs over wi-fi from my desktop. It's annoying that my less powerful iPaq plays these files flawlessly, yet the supposedly more powerful Kaiser makes it unwatchably jumpy.
I'm not too sure about other people but I assumed it was the same? I've not actually tried encoding anything directly for the Kaiser to check performance. I've just accepted that for now unless the drivers are released it's just not a device to be used for playing back high quality video .
Audio said:
Hi All,
I'm posting this to try and help people who are in this large boat of people claiming their TyTN II plys movies terribly.
I know it's all over the forum at the minute, the fact that people can't seem to play movies on their TyTN II, however I experience more than acceptable movie performance, and this is what I do:
I ensure my movies are .avi (if not, I use Kingdia Video Converter which works wonders)
I then Shrink the videos down to QVGA size (using Ashampoo Movie Shrink & Burn). This ensures that the file size is small, and quality is adjusted for that "just right" viewing size on the phone screen.
And to play them I use TCPMP with the FLV 0.4.2 plugin.
Now i could be getting this all wrong, and my idea of "Good quality Movie Playback" is not actually good quality. However, can I please suggest someone tries my methods above and post's their thoughts? And if you already use the setup above, what do you think?
Click to expand...
Click to collapse
My two cents is that none of us want to convert movies and waste tons of time. if a movie X in format Y played well on the Tytn I, why can it not play at least as good on a Tytn II? Thanks for the advice, though this is not the solution most of users are looking for
ceevee369 said:
My two cents is that none of us want to convert movies and waste tons of time. if a movie X in format Y played well on the Tytn I, why can it not play at least as good on a Tytn II? Thanks for the advice, though this is not the solution most of users are looking for
Click to expand...
Click to collapse
I completely understand, if I could make a solution for everybody, i would
I suppose my suggestion is for people who perhaps want to watch movies while away on holiday, or on a long business trip, etc.
I just want to make people aware that you can watch high quality movies on the TyTN II, even if you do have to mess abit.
As for the time it takes to convert, it's surprisingly quick. We're not talking hours, but minutes.
Anyhow, let's keep our fingers crossed for the guys trying to create new drivers, they will be our true saviour!
ceevee369 said:
My two cents is that none of us want to convert movies and waste tons of time. if a movie X in format Y played well on the Tytn I, why can it not play at least as good on a Tytn II? Thanks for the advice, though this is not the solution most of users are looking for
Click to expand...
Click to collapse
Amen to that.
I don't have a huge collection to convert, but enough that it would be a major hassle to have a second encoding of everything. And the reason I like to encode to a higher quality is so that I can play the same vid on any machine I won and get passable quality. If I encode to 320x240 and play it even 1/2 screen on my 12" tablet, it looks horrible. 620 x 480 looks way better and evn look OK at full screen.
Plus, I'd like to just be able to play the little snippits I record on my camera. They are avi from a cheapo Cannon point and shoot which costs less than $200.
***QUOTE ALL REPLIES***
OK then, put it this way:
I couldn't care less if you wanted a file of 640 x 480, or if you find that my suggestion would be a hassle, in fact, I couldn't care less what you do in any aspect of your life, personally I'd rather read a book or watch tv...
The fact is, there is a way to play back movies with Excellent quality, and I have showed you that way. Take the suggestion, do with it what you will, but don't reply complaining that I haven't changed your life forever, i've simply offered a suggestion... that's it.
Audio said:
Hi All,
I'm posting this to try and help people who are in this large boat of people claiming their TyTN II plys movies terribly.
I know it's all over the forum at the minute, the fact that people can't seem to play movies on their TyTN II, however I experience more than acceptable movie performance, and this is what I do:
I ensure my movies are .avi (if not, I use Kingdia Video Converter which works wonders)
I then Shrink the videos down to QVGA size (using Ashampoo Movie Shrink & Burn). This ensures that the file size is small, and quality is adjusted for that "just right" viewing size on the phone screen.
And to play them I use TCPMP with the FLV 0.4.2 plugin.
Now i could be getting this all wrong, and my idea of "Good quality Movie Playback" is not actually good quality. However, can I please suggest someone tries my methods above and post's their thoughts? And if you already use the setup above, what do you think?
Click to expand...
Click to collapse
Once I get a memory card tonight, I would like to try your method. Additionally, I wonder if we could just convert the movie into 320x240 format directly. Sorry I am so new to TyTn II / Tilt as I just bought the ATT Tilt as my first PDA phone. However, I want to convert some DVD movies into memory cards so I can watch it on the road / travel.
Thanks for the suggestions / ideas.
plchan said:
Once I get a memory card tonight, I would like to try your method. Additionally, I wonder if we could just convert the movie into 320x240 format directly. Sorry I am so new to TyTn II / Tilt as I just bought the ATT Tilt as my first PDA phone. However, I want to convert some DVD movies into memory cards so I can watch it on the road / travel.
Thanks for the suggestions / ideas.
Click to expand...
Click to collapse
Hi plchan,
to be perfectly honest, I've no idea how other file types play, as all the films I "Source" are mostly .avi's anyway. However TCPMP has codec for loads of different file types, so I don't see a problem with Shrinking different file types straight to 320 x 240.
You shouldn't have to convert the movies. That's the whole problem.
redsrule2500 said:
You shouldn't have to convert the movies. That's the whole problem.
Click to expand...
Click to collapse
YES I KNOW... I'm not stupid and certainly am not a miracle worker... did you even bother to read ANY of the threads in here apart from the first one? Don't add comments if you don't read the thread first.
Audio said:
***QUOTE ALL REPLIES***
OK then, put it this way:
I couldn't care less if you wanted a file of 640 x 480, or if you find that my suggestion would be a hassle, in fact, I couldn't care less what you do in any aspect of your life, personally I'd rather read a book or watch tv...
The fact is, there is a way to play back movies with Excellent quality, and I have showed you that way. Take the suggestion, do with it what you will, but don't reply complaining that I haven't changed your life forever, i've simply offered a suggestion... that's it.
Click to expand...
Click to collapse
It's not you that people are angry with, it's HTC .
I think you may have put a few people, myself included, into defensive mode with your first post. It sounded to me like you were saying that the video playback problems on the Kaiser were a myth and so you had a few people explaining how it wasn't.
No-one's complaining to you, they're just giving their opinion on how the Kaiser has a video playback problem because from you first post you seemed to not see it.
Yeah your right se0siris, it didn't seem so at the time, but reading back my thread title does give off the wrong impression. I'll get something sorted out...
I know people aren't angry with me (or at least I hope not), and I, too, am angry at HTC for this issue, but watching movies is something I like doing, and am sure other people like doing too, so I just wanted to make people aware that it can be done (even if you have to do it a specific way, using a specific thing, whilst saying a specific magic word, and jumping up and down in a specific way, in a specific location )
And at least I've provided help to one person, which, at the end of the day, makes it all worth while
EDIT: I've added a BIG BOLD Subtitle to stop people getting the wrong impression.
All my movies are resized to 320*240.
It's indeed a bit of a workaround, but then again, smaller movies = less space = more movies
I tried it, and yes it is a nice workaround!
Stay0Puft said:
All my movies are resized to 320*240.
It's indeed a bit of a workaround, but then again, smaller movies = less space = more movies
Click to expand...
Click to collapse
Brilliant way of putting it!
Audio said:
Brilliant way of putting it!
Click to expand...
Click to collapse
Re-encoding always seemed to me to be a pretty obvious workaround for the problem. Certainly, I've never bothered to drop a 750mb movie on my SD card... Not when I can drop 2 or 3 in that space after a couple of hours!
Mind you, some movies still have problems... Especially if there's a lot of screen action going on.
FloatingFatMan said:
Re-encoding always seemed to me to be a pretty obvious workaround for the problem. Certainly, I've never bothered to drop a 750mb movie on my SD card... Not when I can drop 2 or 3 in that space after a couple of hours!
Mind you, some movies still have problems... Especially if there's a lot of screen action going on.
Click to expand...
Click to collapse
I agree, However simple things are often missed.
Regarding some movies still having problems... I've never had an issue.. But saying that, I do ensure all my movies are .avi (which I do anyway, regardless of whether its for the Kaiser, cos i can fit 4 or 5 .avi's on to a DVD and watch them on the TV if need be), and all are shrinked using Ashampoo.
I am very against re-encoding. i had a zune and I HATED how you had to rencode all my stuff just to watch it on the device.
That was partially the reason I sold it and bought this device, now I'm just hoping for a fix on the driver issue so that it will be justified.
Now how much faster is encoding a movie so it's big enough to fit on the main memory compare to placing a movie on the SD? Don't have the time to test, but if someone knows...please share your experience. If I was to watch movies on my tilt, I prefer to be smooth quality.
Yea, I am in the process of converting some of my DVDs also. I'm going to try the programs you mentioned because I'm currently using Aimersoft DVD Ripper and even at 320X240, I'm getting 900 MB files
One related question:
What do I change the buffer settings to on the Core Media Player? It's telling me I need to change them but I don't know what values to put in.
Thanks in advance,
-HAZE-
Im talking about watching movies, playing games - i dont know what the reason its so slow but it is painfully slow. its bothering me a lot. it seems like older much cheaper phones can play video much better than our phones.
is it a hardware fault (no hope) or a software fault ?
its a software fault
if you update your phone to some custom roms the phone runs LOTS faster
anyways, my videos and some 3d games run pretty fast on my phone.
not java games cause those arent hardware supported
I have to say that I am pretty darn happy with video playback on this phone... its fast and doesnt lag... the sound is even in sync with the picture unlike some devices I have tried before... I have not played any graphics intensive games on this phone so far though...
a game like archibalds adventure cant even scroll properly. i mean it looks like it was taken out of the 80s.
Maybe it is because this phone has up to 5 times more pixels then previous phones you have owned?
whats the point in it having 5 times the pixels if it cant cope with them
tehnoobzorz said:
its a software fault
if you update your phone to some custom roms the phone runs LOTS faster
Click to expand...
Click to collapse
Care to recommend a ROM?
orangedavie said:
whats the point in it having 5 times the pixels if it cant cope with them
Click to expand...
Click to collapse
It copes with them just fine. it just wasn't made with gaming in mind.
Shadowdh said:
I have to say that I am pretty darn happy with video playback on this phone... its fast and doesnt lag... the sound is even in sync with the picture unlike some devices I have tried before... I have not played any graphics intensive games on this phone so far though...
Click to expand...
Click to collapse
What videos? Are these videos, by chance a chintzy 320x240? I've tried avi videos in standard DVD resolution, 720x480 and 640x480 and they are both choppy as hell. There are far too many apologists for the really lackluster video playback on this device. I realize it's a driver issue, but when rich multimedia playback is one of the selling points, I think it verges on false advertising when it can't play accepted video standards. Have HTC pony up the money to Qualcomm for the right drivers and I think the X1 and a number of other devices in their stable can really start to live up to their claims.
Yeah, I have to agree. 5X the pixels means nothing if the phone can't handle them
No problem for me with video...
-I recode vidéo in 800*480 with HTC Touch HD Video Converter
-I use Windows Media Player to watch video
rom im using
im using touch it xperience 3.5 but i've heard touch it 2.2 was faster
from now on if it has qualcom in the hardware spec im gonna avoid it like the plague!
I gotta admit, just when I start being happy with the Xperia video.....
I'll look over at some movie my wife is watching on the iphone and just shake my head. The Xperia is NOT impressive in the video dept. I can get video to play to ALMOST lag free and it looks pretty dang good. But c'mon already! With the hardware capabilities of this phone, video should look all around amazing.
KennyXL said:
What videos? Are these videos, by chance a chintzy 320x240? I've tried avi videos in standard DVD resolution, 720x480 and 640x480 and they are both choppy as hell. There are far too many apologists for the really lackluster video playback on this device. I realize it's a driver issue, but when rich multimedia playback is one of the selling points, I think it verges on false advertising when it can't play accepted video standards. Have HTC pony up the money to Qualcomm for the right drivers and I think the X1 and a number of other devices in their stable can really start to live up to their claims.
Click to expand...
Click to collapse
I have converted some Chinese tv serial episodes using magic video converter and they came out great, not too sure of the res but by memory its around 640x480 to 720x480 as you comment... no lag and sound is better than I expected... I also have a movie or two that works just as well, again Chinese stuff (as I am learning Chinese I find this is an interesting way to help out with both reading (subtitles) and listening)... I am using coreplayer and have it in full screen mode when watching...
Oh and I am by no means an apologist... if it was crap I would say so, but its not... but then I dont expect my phone to act or have the same capacity as my laptop/pc.... its a phone and does what it says on the tin...
I dont get it. I have a stock ROM and my video is perfect. I downloaded an Ipod converted (m4v) version of Superbad and it looks and sounds amazing FULL screen btw). All i had to do was rename the file to mp4 and it works perfectly! Maybe there is something else going on with you guys phones. I also have Anchorman, SemiPro, and several others running perfectly. Besides TF3D, i dont have any other plug ins installed.
I also have no issues with video playback,
I am running Touch IT 2.2 which i am not willing to replace yet because the ROM is fast as hell and bug free. Just used the HD converter in the sticky on page 1 along with a few speed tweeks from the Mark a Clienti thread and POW!! full screen, top notch quality res and not a single lag or frame drop in sight.
I have noticed that a lot of people are having issues with various applications on their SE X1's but i dont seem to have had any issues at all. I started with the clean ROM and made sure i installed all of my required apps and tweaks in one go, making sure to reset after each install. After that i just sat back and watched it fly, maybe i'm just lucky
Regards,
Creamy-Goodness
creamy said:
I also have no issues with video playback,
I am running Touch IT 2.2 which i am not willing to replace yet because the ROM is fast as hell and bug free. Just used the HD converter in the sticky on page 1 along with a few speed tweeks from the Mark a Clienti thread and POW!! full screen, top notch quality res and not a single lag or frame drop in sight.
I have noticed that a lot of people are having issues with various applications on their SE X1's but i dont seem to have had any issues at all. I started with the clean ROM and made sure i installed all of my required apps and tweaks in one go, making sure to reset after each install. After that i just sat back and watched it fly, maybe i'm just lucky
Regards,
Creamy-Goodness
Click to expand...
Click to collapse
i dont see why I have to convert videos to another format.
Shadowdh said:
I have converted some Chinese tv serial episodes using magic video converter and they came out great, not too sure of the res but by memory its around 640x480 to 720x480 as you comment... no lag and sound is better than I expected... I also have a movie or two that works just as well, again Chinese stuff (as I am learning Chinese I find this is an interesting way to help out with both reading (subtitles) and listening)... I am using coreplayer and have it in full screen mode when watching...
Oh and I am by no means an apologist... if it was crap I would say so, but its not... but then I dont expect my phone to act or have the same capacity as my laptop/pc.... its a phone and does what it says on the tin...
Click to expand...
Click to collapse
You might want to check out what the bitrates are on those videos. Your average avi video is about 1.3-1.4 gigabytes in size for your standard 1.75-2 hour movie. That comes to about 1,500 kbs. Anything significantly less than that and it looks kind of muddy when viewed on a regular sized TV screen. Ideally, you shouldn't even have to recode video you ripped yourself. In theory you should be able to rip once and play on all your appliances that are video capable using a standard codec with reasonable settings. An avi file 1.3 gigabytes in size for a 2 hour movie is entirely reasonable and I highly doubt that you can achieve that with the X1 in its current state. I've tried extensively and the only way you can make it play with any level of smoothness is by dramatically reducing the resolution or dropping the bitrate precipitously. You can't just drag an acceptable video from your computer onto this phone and expect it to play acceptably the way it is right now. As for the expectation that it's only a phone I say that the drivers are the only thing that prevent it from meeting the expectations. I'll bet the hardware is there, but HTC just feels like being cheap. Heck, there are phones debuting at MWC right now that do full motion 1080p playback of h.264 video. The X1, which isn't more than a few months old, can't smoothly play back a 640x480 1,500 kbs video. At $700 retail and their promise of a full-featured multi-media device that is scandalous. I dare anyone to say otherwise.
KennyXL said:
You might want to check out what the bitrates are on those videos. Your average avi video is about 1.3-1.4 gigabytes in size for your standard 1.75-2 hour movie. That comes to about 1,500 kbs. Anything significantly less than that and it looks kind of muddy when viewed on a regular sized TV screen.
Click to expand...
Click to collapse
You sound much more knowledgable than me so I wont try to argue with you, but I have quite a few avi files that are around the 800mb size that play very well and are crisp and clear even on a bigger screen (my laptop is 15.4 and pc is 19inches), in fact I find it pretty rare to have an avi file over 900 Mb for a standard movie (up to 2hours I would guess is pretty standard)... As another poster a couple of posts back mentioned, I notice a few problems that people are having that I dont... thank goodness as with my level of understanding I would be hard pressed to now what it is I need to search for to fix the problem...
Since the N1's resolution is pretty much full DVD res, are there any tricks out there besides watching a non-full screen movie to minimize the filesizes? I'm using handbrake and even with 50% quality movies come out at about 1GB a piece...
Using H.264. Any tricks?
Thanks.
-Mike
You need to reduce the bits per second. I've used handbrake, but I usually use SlySoft's DVDmobile. I get excellent results with file sizes between 500-700MB.
Just get Format Factory and use the default settings for HTC. I've been using that and my file sizes come out smaller than the original and quality is excellent. This was discussed in a thread just a month or two ago.
You can try Mp4forHD that was developed by Jandre here on XDA-Devs:
http://forum.xda-developers.com/showthread.php?t=478050
You can use the HD settings to produce an mp4 file that gallery3D can read without problem.
Thanks guys. I thought the quality setting in handbrake was VBR and would shrink the size more than it did, but I'll look into setting a hard limit.
Thanks for the heads up on those other programs to.
-Mike
The percentage encode option in Handbrake, despite being their preferred method, doesn't make any sense to me as it's too subjective based on the quality of the input file.
Alternatively, break out the calculator and work out what bitrate you need to use to get x size.
Just use the "target size" option instead. It's not "correct" but it's easy and you know what you're going to get.
You can also try WinFF if you want something really no-frills that gets the job done. It supports multithreaded encoding (pretty sure HandBrake does too). I belive the 64bit version of handbrake is noticably quicker if your hardware support it (which it will).
use DVD shrink and then convert in handbrake. Normal movie sizes are 500-600k after DVD shrink
any free software for mac that can do this?
xXJay_RXx said:
any free software for mac that can do this?
Click to expand...
Click to collapse
Handbreak works on Macs too.
http://handbrake.fr/downloads.php
i use handbrake at ~700-800b/s, good enough for me
I use handbreak and select "target size" for 700MB , quality is good. For music videos i do constant quality RF 23 most of the time it works well , occasional video needs extra tweaking.
everclock said:
Handbreak works on Macs too.
Click to expand...
Click to collapse
If I'm not ripping a DVD but want to convert a movie to MP4 with h.264 I use iSquint on the Mac and go for Optimize for TV setting.
everclock said:
Handbreak works on Macs too.
http://handbrake.fr/downloads.php
Click to expand...
Click to collapse
yea but the past few times i tried on mac, i really couldn't figure out how to use it. still dunno how to use it. cant find out how to rip a dvd using it
saint327 said:
Since the N1's resolution is pretty much full DVD res, are there any tricks out there besides watching a non-full screen movie to minimize the filesizes? I'm using handbrake and even with 50% quality movies come out at about 1GB a piece...
Using H.264. Any tricks?
Thanks.
-Mike
Click to expand...
Click to collapse
Don't use H.264. I use anydvd to rip any dvd on the fly with dvdshrink to .iso files, then I use handbrake to make .mp4 copies for my phones. My Nexus gets files about 330mb and my Magic get movies that work perfectly at about 170mb. Adjust video output for each target device, maintaining aspect ration of the original movie.
Handbrake
/thread
attn1 said:
Don't use H.264. I use anydvd to rip any dvd on the fly with dvdshrink to .iso files, then I use handbrake to make .mp4 copies for my phones. My Nexus gets files about 330mb and my Magic get movies that work perfectly at about 170mb. Adjust video output for each target device, maintaining aspect ration of the original movie.
Click to expand...
Click to collapse
Good job sherlock. When you're using Handbrake, you ARE encoding to H.264. Derp.
H.264 is best since the phone has a hardware decoder for it.
I'm confused. I dl a movie online and its usually about 700mb or like 1500mb which I guess is higher quality? I think the nexus can playback 720p but I don't know how to know if I'm playing a 720p video, so what are you guys watching that you can cut them in half to 700? My ignorant assumption is that 700 is DVD quality and 1400+ is HD? I've also seen torrents that were like 6,000mb so I'm not sure what if anything about the file's quality can be determined from its size.
great info. can someone suggest a movie player?
AndroidPerson said:
I'm confused. I dl a movie online and its usually about 700mb or like 1500mb which I guess is higher quality? I think the nexus can playback 720p but I don't know how to know if I'm playing a 720p video, so what are you guys watching that you can cut them in half to 700? My ignorant assumption is that 700 is DVD quality and 1400+ is HD? I've also seen torrents that were like 6,000mb so I'm not sure what if anything about the file's quality can be determined from its size.
Click to expand...
Click to collapse
The higher the filesize, the greater the resolution, video bitrate, audio channels, or audio bitrate.
Just because you have a higher filesize movie doesn't mean you necessarily have better quality. If you're watching movies using the screen on the nexus, why would you ever need to make sure it's 720p? Granted, it'd look better on an HD screen, but on the nexus 800x480 screen it's just not needed.
i have been a big fan of dvdfab for a while.. I just bought a xoom and want to see how movies look on it,... i used dvdfab video converter used the ipad format and it looks great... just thought i would throw that out there!! people wondering what software to use.. try that.. www.dvdfab.com
Do you have a sample file?
I can confirm that DVDFab makes it incredibly easy. I also selected the iPad preset, and it works like a charm. Video looks pretty nice.
Also the encode only took twenty minutes for a 1.5 hour DVD, pretty impressive. I've experimented with handbrake, but this is far easier.
khov07 said:
I can confirm that DVDFab makes it incredibly easy. I also selected the iPad preset, and it works like a charm. Video looks pretty nice.
Also the encode only took twenty minutes for a 1.5 hour DVD, pretty impressive. I've experimented with handbrake, but this is far easier.
Click to expand...
Click to collapse
Did you try the Bluray version? I have to use two tools for Bluray discs that do not have a single large file for the main movie but are split into individual files (like A-Team, Up, Toy Story etc.). I first have to use ClownBD to create an iso file (or if I want to rip TrueHD audio which is not supported by AVS Video Converter) and then use the the AVS Video Converter to create the mp4 file... It works but is annoying. Not "$60-for-a-new-program-annoying" though
Sorry, no, I don't have any blu-rays to test with.
I kept fudging around with the settings, and I found that with DVDFab 8 the best combo I have found is using the iPad 1080p preset, but editing the settings to set the resolution to 1280x720 instead of full 1080 with 2-pass encoding.
I figure that on a screen that is 800 pixels tall, the trade-off of a slight zoom (zooming 720 pixels up to an 800-pixel screen) is preferable to downscaling the image (1080 pixels) and a much larger file-size. I tested this with an Avatar DVD, and it looks great and plays very smoothly on the native Android video player. For a nearly 3-hour movie, 2.59 gigs isn't too bad at 720p. Granted, I'm upscaling a source of only 480p, but it still looks great.
***I wonder which produces a better result: a 480p encode from a 480p source zoomed way up to 800 pixels, or a 720p encode of a 480p source with a slight zoom up to 800 pixels.
Ideas?
Found a bonus to using DVDFab 8: it comes with a very nifty video converter that handles all the major formats. I tested it with a 720p flash video, and coverted it to mp4 perfectly.
No, I don't work for them, I just really like the product. Very useful!
I use FormatFactory 2.6 to convert all what i want. It´s easy and free
Hello all,
So i am trying to get the best experience possible after a quick viewing of gravity in 3d from a 2gb file a couple months ago.
I have done a lot of research and used anydvdhd to rip my store-bought Avatar3D to a 48gb file. Copy protection is stripped i believe and it will only let me make an iso because it is 3D.
I am trying to use handbrake to take that iso into the highest quality mp4 because i have to i think?
Although are people now able to go around the cinema? ive been out of it a couple months...
When im in handbrake it is telling me that the source must first be scanned...but i know i already did that.
Any help super appreciated.
Thank you!
bjmjpl said:
Hello all,
So i am trying to get the best experience possible after a quick viewing of gravity in 3d from a 2gb file a couple months ago.
I have done a lot of research and used anydvdhd to rip my store-bought Avatar3D to a 48gb file. Copy protection is stripped i believe and it will only let me make an iso because it is 3D.
I am trying to use handbrake to take that iso into the highest quality mp4 because i have to i think?
Although are people now able to go around the cinema? ive been out of it a couple months...
When im in handbrake it is telling me that the source must first be scanned...but i know i already did that.
Any help super appreciated.
Thank you!
Click to expand...
Click to collapse
I personally just use DVDFab for everything, and I like to use full sbs 3D 720p for my movies (also handbrake doesn't handle 3D encodes as far as I am aware).
Use this guide for encoding 3D sbs-files on your own:
http://rodrigopolo.com/guias/ultimate-blu-ray-disc-3d-ripping-guide-en.html
Toss3 said:
I personally just use DVDFab for everything, and I like to use full sbs 3D 720p for my movies (also handbrake doesn't handle 3D encodes as far as I am aware).
Use this guide for encoding 3D sbs-files on your own:
http://rodrigopolo.com/guias/ultimate-blu-ray-disc-3d-ripping-guide-en.html
Click to expand...
Click to collapse
The problem with DVD Fab is it is expensive and having that nagging watermark appear every so often isn't too appealing. Also, I was having a hell of a time trying to get it to rip my Hubble Imax 3D Blu-ray. It was chopping off the edges of the screen.
I also attempted to use IMToo, which worked, but the audio was out-of-sync.
BleedingPurist said:
The problem with DVD Fab is it is expensive and having that nagging watermark appear every so often isn't too appealing. Also, I was having a hell of a time trying to get it to rip my Hubble Imax 3D Blu-ray. It was chopping off the edges of the screen.
I also attempted to use IMToo, which worked, but the audio was out-of-sync.
Click to expand...
Click to collapse
Try following the guide above, it should work for almost all blu-rays. I just find DVDFab easier.