My diamond was already unlock by 1_93OliNex_HSPL_UnsignedEdition.
first i replaced these words "OliNex" to my name by ultraedit32.
and then i flash the NBH by RUU, program show me it was success.
but the words on the screen still show "OliNex".
anyone help?
I don't think there would anybody help !!!!!!
You did't made this Prog. !!!
I for me did't wont that anyone change progs. that I made!!!!!
Ghostrider
Related
I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
same problem
I have exactly the same problem!!! but mine is SX66 Siemens phone
cobrabite said:
I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
Click to expand...
Click to collapse
well i dont know how to fix this operator thing, but u can get around with by using MaUpgradeUt_noID tools.
if you are using helmi_c's rom, it's located under folder PH20B1. so just copy the rom file in there, set the oeprator as your T-Mob101 and flash.
u should also take out the SD card while flashing, just in case.
hi all, i have just got my new breeze but its got the oldest rom on, the 1.06 htc one. i wanted to flash the new one with the 1.38 radio on but i am having some trouble.
i have looked at wiki and tried to reg hack to allow untrusted programs to run but after i have edited the reg with the many ways i have looked at the screen just goes blank when sspl is enabled.
basically i have looked into it but cannot get my device to flash, can anyone please write me out a quick walkthrough i can follow to flash it, with what registry settings they exactly used to app unlock their device?
thanks all
well i have got it to app unlock with a handy tool i have found here, but whenever i run the hermes unlocker 3.0a it fails, and the sspl i have tried just turns the screen black and doesn't even load the bootloader. how can i fix this does anyone know ?
Did anyone have a similar problem?
I cant seem to identify CID. I tried using the mtty program but it says
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
I also cant find any CustomRUU that will communicate with my phone. CID used to be QTEK_Z12(I have no idea how my friend changed that) but now i get Invalid Vender ID and when i try and make my own file with nbhgen I keep getting Image file corrupted. In phone's boot mode it says
Bree100
SPL-1.10.0000
When I try and run in normal it get stuck on Windows Screen and wont go further
If anyone has any ideas, i'm willing to try anything. Ty in advance.
I hav the exact same problem, I have a Dopod 595, and its somehow got a messed up CID, but nothing i can do will reflash it. I have tried many combinations of different flash files and different flash tools - best i can ever acheive is it seemingly start the flashing, but drops out before really doign anything.
I cant get past the windows boot screen, so cant run anything to enable a new SPL, and flashing from memory card doesnt work, I also cant find a way to get to a new/old or SuperCID version of the SPL?
Any help would be greatly appreciated! My Dopod is regrettably sat in its box just doing nothing :-(
I have the same problem, does anybody know any solution now to flash the superCID in bootload (tri.color) mode?
I have the same problem, please heeelp !
I have the same problem! Please HELP!!
dear all, I have to say use "search" tool, I had same problem. What it happened? When I flashed rom, it got stuck and after I tried boot breeze but during starting stopped.
so I found this site useful http://forum.xda-developers.com/showthread.php?t=387522 and on second page I had to say thank you.
I can redeem your devices for experements of repairing . Or restore them for you, for some fee. Who interesting? write me to PM...
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'