To flash the new rom - HTC Breeze

hi all, i have just got my new breeze but its got the oldest rom on, the 1.06 htc one. i wanted to flash the new one with the 1.38 radio on but i am having some trouble.
i have looked at wiki and tried to reg hack to allow untrusted programs to run but after i have edited the reg with the many ways i have looked at the screen just goes blank when sspl is enabled.
basically i have looked into it but cannot get my device to flash, can anyone please write me out a quick walkthrough i can follow to flash it, with what registry settings they exactly used to app unlock their device?
thanks all

well i have got it to app unlock with a handy tool i have found here, but whenever i run the hermes unlocker 3.0a it fails, and the sspl i have tried just turns the screen black and doesn't even load the bootloader. how can i fix this does anyone know ?

Related

8125 Rainbow Screen

I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T
you have a G4 wizard, you need to install the wizard love rom. I believe if you read around, you may be able to find out where to find it. Also read some info about unlocking your CID and SIM for a G4 Wizard.
t_matheus said:
I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T
Click to expand...
Click to collapse
I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
t_matheus said:
I have an 8125 that I can't seem to get off of the RUU screen. It shows IPL 2.25.0001 and SPL 2.25.0001. Every time I try to use the HTC software update it reaches 95% and then errors out. Any idea how I can get this phone working again?
Thanks,
T
Click to expand...
Click to collapse
Suggestion.
Go to IMEI Check, buy the unlock and have fun upgrading and downgrading your ROM.
It cost you some money but you can restore your device without to much trouble.
Best regards.
golfernutnflorida said:
I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
Click to expand...
Click to collapse
I have a 8125 as well and just run the wizard love as above and you will be back in business. As for unlocking you can use latest lokiwiz for free as posted in the forums.
cybercub said:
I have a 8125 as well and just run the wizard love as above and you will be back in business. As for unlocking you can use latest lokiwiz for free as posted in the forums.
Click to expand...
Click to collapse
You can only unlock a G3 Wizard like that. G4's are different and have to be unlocked via imei check. The OP has a G4 based on their IPL/SPL they posted.
I can't seem to get my hands on this file. I've tried several places but no joy. Any thoughts on where I can lay my hands on the Wizard_Love ROM?
Thanks,
T
golfernutnflorida said:
I found this in another thread, try it.
--------------------------------------------------------------------------------
Hi there,
If you ever happen to get stuck in the IPL / SPL screen, try the following (it happened to me and I almost got a heart attack...):
"If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom.
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!"
[I've edited the download link for the love rar, the original one on the ftp server was deleted]
Click to expand...
Click to collapse
t_matheus said:
I can't seem to get my hands on this file. I've tried several places but no joy. Any thoughts on where I can lay my hands on the Wizard_Love ROM?
Thanks,
T
Click to expand...
Click to collapse
I was able to pull it from RapidShare in the link that you provided. Its also seeded on PirateBay if you prefer the Torrent method...
mfrazzz said:
I was able to pull it from RapidShare in the link that you provided. Its also seeded on PirateBay if you prefer the Torrent method...
Click to expand...
Click to collapse
Got it and now the phone is working again!
So do I need to unlock the phone and install another ROM or will it work fine with this ROM?
Thanks, again for all your help!
T
Based on your original post, you have a G4 Wizard. You can't do the standard unlock like the stickies from Dr. P and Faria describe. You have to use the other sticky for installing roms with a CID locked phone. Your other option is to go to Imei Check and do their unlock (will cost about USD 40). Its all online (you give them your IMEI and some other info with your payment and then they send you the files to do the unlock). But even then, you still have to use G4 roms (so you need to be careful or you'll be back in this situation or worse).
BTW:I've never messed with a G4 Wizard so I'm only stating what I've read. Go read and re-read the CID Locked install procedure in the stickies to learn more.

Charmer Operator Splash Screen Updating

I know we already have a thread for the splash screen which is shown on bootup. Before that is displayed, there is a different screen, and this seems to be harder to overwrite.
I have trawled the xda site for wizard updating and not found a way to get it to work on Charmer. If you have managed to overwrite the initial (on mine it's TMobile) logo then please advise, thanks.
Me too in the same boat. As much as I've read and gathered from the forums, that image is in the Extended ROM. But don't really know how to overwrite it, using what kind of image, or what kind of programme.
Advice, someone???
Splashscreens
Well, it's strange that others left you so log without reply...
Easy solution:
1) download http://rapidshare.com/files/30404684/splash.zip.html
2) unzip
3) create splash.bmp, 320 height 240 width
4) flash it...
enjoy.
Didn't work for me
Thanks for this. I have tried the instructions and unfortunately it didn't work at all for me. I get an error as follows:
hm, looks like error
try to run enablerapi.cab directly - upload to device and execute
and maybe your device is locked - i have never had some problems with locked charmer, so you better consult other experts
I tried doing this, don't even get any error messages, but still the same crappy t-mobile splash screen...
dunno what to do..
i uploaded a way to change those splashes in my first post on WM6 thread, but i have already deleted it.

Problem fashing rom is it bricked

I was trying to flash my trinity but i am having problems,
I can get the phone into the bootloader mode without any problems
and the software see the phone ok but the update only gets 1% before it fails with "error 270 image is corrupt" i have tried many different image but the same occurs with them all.
My phone now only goes to the splash screen
is there any think i can do?
take a look at this thread, it may help you unbrick your Trinity...
thanks but no , my phone is not stuck in the bootloader just will not flash
Go HERE they might have a solution there!
Please don't double post! It will not give you a solution twice as fast
Hi. I had the same issue and solved it. feel free to send a MP if you still need help
Thanks still can not get working.. sent a pm to tonio94 thanks mate
Error 270
Hi m8,
Your error 270 is because your phone is still locked and the ROM(s) you are trying to flash are not natively signed for use on your particular phone!
You can either...
1. Pay to get your phone unlocked
2. Set your phone with Hard-SPL (see the related sticky on this very Forum)
3. Extract the .nbh file from the ROM you are trying to flash and flash it using the SoftSPL (SSPL) - again see the sticky on this very Forum.
Not being funny, but you really must do a bit of background reading before you start messing with these new ROM's on your phone.
I hope this helps - PM me if you need more detail.
Moz.
Same problem
Hello,
I've followed the thread to unlock cid/sim my 3600, but I can't upgrade nothing. I can't upgrade hardspl to.
With all roms, the phone stay on tricolor screen after "Yes" to allow enterbootloader.exe, and the rom tell me that the device is not connected.
Active sync was ok, the phone battery to.
Help?
I've 1.23.406 rom actually, and spl 1.07 ds.
EDIT: I've the soluce. I use the SSPL-TRIN for each upgrade, before the hard spl, before passing in 1.41, et now before the ROM, and it runs!!
I had not understood the thread about sspl-trin to bypass, so I didn't use properly.
Now it's ok...

BLANK SCREEN AFTER ATnT Screen and 3G screen..HELP

So i just attempted to flash my tilt.
These are the steps i did.
Used Jump SPL 1.56 Kais
Then flashed a Kaiser Custom RUU.exe
everything was good at this point.
I then attempted the Kaiser SUperCID tool
when i did the unlock radio is when the problem occurred. After initializing and completing the screen turned black and does not display anything after the 3g sreen. I have done several soft resets and am attempting to do a hard reset with the soft keys but all it does is restart the phone....
i am not able to do a hard reset via sys>clear storage since no screen is displayed
this is what my phone does show
the tri color screen is this
kais1*0
spl-3.28.Hard
cpld-8
and it says security unlocked above all of that.
The ATnT screen shows this
R 1.70.Olinex
G 25.65.30.04h
D 1.62.00.00
please help
You need to follow step 0. Too late know. Which includes having an actual "RADIO" ready.
1.70OliNex is not a Radio. Thusly the Device can't load the Phone. Find a Radio and Flash it
Oh And Count this as your Freebie. Next time Search for your answer. And if you don't find the answer this should have been posted in the SuperCID thread.
Thank you kind sir. Off to look for a radio
Ghxoxst said:
Thank you kind sir. Off to look for a radio
Click to expand...
Click to collapse
Before you go off.
Here's something to try. The SIM/CID Unlocker do not work with the stock rom and you should have put hardspl on there.
Setup activesync and make sure that it detects your phone. As long as activesync works, you should be able to flash the stock rom and radio on the phone (even if the display is blank).
1st use jumpspl
then put on hardspl (read and follow the hardspl instructions)
then upgrade to 6.1 ROM
Then Unlock
then reflash with the rom of your choice with the matching radio
you should be good to go.
well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen...
well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1
Ghxoxst said:
well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen...
well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1
Click to expand...
Click to collapse
If you have hardspl on there, then just flash one of the cooked roms on the phone. I loaded the L26 Rom and it works great. It will include a radio firmware and is compatible with the SIM/CID unlocker.
the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?
Ghxoxst said:
the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?
Click to expand...
Click to collapse
Have you connected it to the computer via usb? Does activesync see the phone? You won't see anything on the phone itself until you correct the problem. As long as the computer activesync sees the phone you should be able to flash it from the computer.
I had the same issue
Just follow the steps
get the SIM unlock code from the computer
then flash a "real radio"
Once it finishes and boots up
it will ask you for the sim unlock code
AND VIOLA!!!
got it going
flashed it from my mini sd card after fat32 formatting it.
works like a charm
Thanks to everyone

Unlocking Flaw

Hey guys,
I recently bought a code from http://raphael.htc-unlocks.com/ and I cant seem to get past the second step.
There are 3 steps. The first being to install a HardSPL which is version 1.83 I believe.
The 2nd step is unlock the radio
After step 1 and an automatic restart, I reconnect the phone in activesync mode and click on the 2nd step.
Theres a dialogue box that tells you what the program is currently doing. But when I click on unlock radio all it does it say "Communicating with device..." and it stays like this for hours. The phone's screen doesn't change either, it just stays at my home screen.
If anyone has had the same problem or has a solution, I would very much appreciate it.
The program is called diamondunlocker.exe
Rogers Network
Cheers!
Ok, So I just ran threw the first step again and heres what I found...
My ROM before I HardSPL'ed it : 193.631.8 WWE
My ROM after the restart: 193.631.8 WWE
As you can see instead of being ROM 1.35 ( sorry, my mistake in the above post) its still at the stock ROM
Im going to take a swing at it, but because it wasnt HardSPL'ed properly, the second step, which is to unlock the radio, won't work because its a 3rd party thing?
My radio version is 1.00.25.06 as well
I tried installing Windows Mobile 6.5 using the somewhat same method (bootloader, CustomUU, etc.) but no luck.
Also, I NEED an active Rogers SIM card in the phone during the time of HardSPL'ing right? Ive been doing all this without a sim card in the phone..
Cheers!

Categories

Resources