Before flashing Kaiser for the first time - Tilt, TyTN II, MDA Vario III General

Hi all,
I flashed my old Wizard numerous times ... before doing so on my new Kaiser, I'm wondering if there's anything I should preserve before doing so? Or is the AT&T ROM on rapidshare a complete ROM that would bring my Kaiser back to its in-the-box state, presuming I follow the restore process documented elsewhere?

No need to backup anything but your personal data. Everything else can be restored back in to the same state as when it was released.
All the instructions can be found on the wiki, starting from the HTC Kaiser page, under ROM Upgrading.
Ta
Dave

Related

How to..make a full bckup on new ROM without problems

Hi guys.. I keep reading your beautiful forum everyday, learning some...
As TheLastOne says, one must do a fresh install after a new ROM upgrading, avoiding the backup to overwrite some file of the old Rom.
My question is... is there a way to restore programs anddevice settings (like buttons config,rings,passwords,network settings etc) withouth making conflicts? I was thinking about a backup software that only saves custom elements.. do anybody know a way to do it? Thanks a lot. :?:
PS I read the post from Happygoat about CABs...is very tricky for me...I hope ther is a easyer solution!!!
There are two programs out there that make decent backups...
1. Sprite Software
2. SunnySoft Backup Manager
Both can be customized to only backup personal data, such as phone number database, etc.
To backup settings, the only way is to make your own cab.
What you do not want to do, is to backup everything, including the registry, and restore it after a ROM upgrade...!
These backups are nice to have if your ROMs stay the same...but if you upgrade/change ROMs, and restore such a backup, your PDA could become unstable. This has to do with the fact that the ROM update uses its resources and registry different, and writes programmes differently.
Hope that clears up things for you.
Thank for clear and fast reply @ HappyGoat..
So I will wait for a definitive "guide" from you about registry and settings CAB saving and try out the softwares u mencioned..by the way those sw save and restore also programs relative registration passwords?
I have made a full backup file on my storage card of my registry with PMH, now I think to do the follow:
1) backup all programs and data with Sprite software on sd card
2) upgrade to new rom and hard reset the device
3) reinstall PMH and restore registry
4) reinstall Sprite and restore programs and data
5) ... it will be ok ? I hope so because I really don't understand how to follow step 2 from HappyGoat guide
Thanks for pacience.. (TheLastOne...can you give an opinion..?)
Vicer,
Check this below link from Sprite Software for your Sprite backup.
http://spritesoftware.crmdesk.com/answer.aspx?id=66&back=browse.aspx#p24
I can confirm that you can successfully backup after a ROM upgrade and you wont lose any new ROM functionality after restore. I have tried this with various ROM upgrade and it works. Follow the instructions and every thing will be fine. However one thing you should note that when you restore from the old rom and if the program get stuck at one point, then dont feel afraid just soft reset and restore again. Remember that if your restore is finished with out any warnings it means that it is restored perfectly.
I hope this helps and if you need any information then please let me know.
Hemant.
Thanks a lot Hemant..I will try soon!!!
Thanks Hemant, I've been looking for this answer for a long time!
Backing up the rom because of garanty. How to?
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Re: Backing up the rom because of garanty. How to?
pena_leve said:
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Click to expand...
Click to collapse
Anyone?
Re: Backing up the rom because of garanty. How to?
tambeng said:
pena_leve said:
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Click to expand...
Click to collapse
Anyone?
Click to expand...
Click to collapse
Unfortunately I had many problems after the restore with Sprite...I reinstalled all from scratch and now is all ok (unless I downgraded radio to 1.10 that is more stable in my opinion) Ref your question... I'm not an expert but I read the wiki everyday...and:
1) follow the getdevicedata procedure to know your original SHIP rom.
2) find on the xda ftp site the one that mactch exactely with your data
3) you dont need more to dump your Rom!! anyway on the forum you can search for "dump rom on sd card" to find the answer to your original question. Hope this helped..byez

reverting back to original cingular rom

HAS anyone uninstalled or overrided IMATE UPGRADE rom and reverted to original CINGULAR 8125 ROM? IF so, please list steps. I'm within 30 day period and don't want to send back with HTC and IMATE info and splash pages
Thanks
same here.. please help someone.. someone...
i had the same issue, and didnt find original, but for what its worth, exchanged my 8125 with no problem with i-mate rom.
good luck!
IF you can find someone with an SD backup (you shoulda made one when you started screwing around!) this is trivial to do.
Otherwise its somewhat of a PITA......
could you please outline the steps needed to accomplish this simply?
I am currently back at the cingular rom, but I could not restore the extended rom.
Basic rundown, After screwing around witht eh imate rom, decided to try to go back, found out I could not.
There is a particular issue with imate locking the extended rom, and problems running awizard and lokiwiz on a imate rom.
So, I went a round about way (suggested by someone else).
I used the tmobile uk rom (comes with same installer as teh iamte one), once that was installed, I ran awizard, which ran fine, and restored my cingular rom and splash screen (this is of course assuming you made a backup of the rom the first time around).
Only thing I cannot do, is restore the cingular extended rom.

Backup existing ROM-Help needed

Hello,
Is there any proven method to backup the existing rom to a form of files like the Updated ROM (nk.nbf,RUU,etc.)?
I would like to preserve my original wm5 ROM since it contains Payed application i can't re-register.
After backing up-it will be WM6
Thanks
Roy
im looking for the same thing too
because i want to try out other roms but i have alot of stuff on my current phone
i know theres a utility that will backup to the minisd card and your able to back it up later
no luck yet
im still searching the forum and google though
No, for most backup applications, you can't restore a WM5 software backup to WM6 device, otherwise weird incompatibility will be happened (such as crashing Contacts)
Yes ! very true,there wud be a incompatibility issue,however if you backup your wm5 rom on a Sdcard,that is also only possible if you have a CID unlocked device,then in time of any emergency,you can reflash it back to your phone,through Sdcard method to restore it back in working condition,but all you applications or programs in wm5 cannot be restored back to wm6 OS.
Cheers
Thanks for you help,
my thoughts were to keep the original ROM for selling this device..
Roy
http://forum.xda-developers.com/showthread.php?t=276963
This is the way to make a copy of your current ROM of the Wizard to a SD card.
As stated above this does NOT include any application or data you add yourself to your Wizard but only those apps that comes along with the ROM in the first place.
This should be just fine to have a backup of your current WM5 but does not help to "preserve" any paid applications you installed yourself neither your contacts etc.
Good luck!
..............

Backing up ROMS

I recently reflashed my Orange branded Kaiser with HTC's official ROM from thier website.
After flashing the unit, the radio refused to work, and had to send it back to HTC and they replaced the main board, luckily under warranty. The phone now works great.
I am considering flashing to a new ROM but don't want the same thing to happen again. Is there any way i can back up the exisitng ROM so that if it all goes wrong i can go back to what i had before.
I have done some searching but there does not seem to be anything concrete or a procedure to do this. Can anyone help. thnx
I beleive that method is outlined in the wiki.
SPB and/or sprite backup are Comercial Apps than can backup your phone.
We have a copy of the WM6.1 Offical Orange ROM untouched on XDA-Devs if you need to flash back to it.
Here is a thread discussing upgrading and unlocking your Orange Kaiser:link
and here is another discussion I had with an orange user about upgrading: link
Take some time to get familiar with the Kaiser ROM upgrading process and then follow the advice in those threads and you should be fine.
Thanks
Dave
Thanks Dave i will have a look.

Change rom and restore backup

I've searched at the forum but couldn't find a good answerd for my question.
I got a Vodafone NL X1 it's currently on the Vodafone R2 release but i want to change it to the generic release(hate the vodafone crap). So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
Hope someone can help me
thanks in advanced,
killer8nl said:
So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
thanks in advanced,
Click to expand...
Click to collapse
My 2c worth:
a) official ROM's have SPL in them, so you don't need hardSPL to flash these
b) regarding "restore after ROM change", in reverse order:
if you restore a full backup from your existing installation after a ROM change, it will obviously restore all that is currently there - including the Vodaphone fluff
both Spb and Sprite offer "full restore after ROM change" options - however, registry changes from one ROM to the next make this risky. Most cooks will advise against it
Oke thank you for the answerd, will do a fresh install then after the rom update
SPB restore can let you choose what to restore, the necessary things will be contacts, sms, email and documents, you can skip the programs, registry and other non personal things, but like this you will need to reinstall all programs and configure them from scratch
killer8nl said:
Oke thank you for the answerd, will do a fresh install then after the rom update
Click to expand...
Click to collapse
Yes, that's the technically correct way.
After you've upgraded the ROM and re-installed all your apps, (say) weekly Spb or Sprite backups for a full restore are obviously viable. I've been doing this for about 5 years now - saved my bacon more than once.
Still, I agree that re-installing all the apps after a ROM upgrade is a real pain in the butt. People who change ROM's constantly must have another day phone on the side
I tried to update the generic NL R2A rom from my vodafone NL R2A phone but it doesn't work. It keep saying "No image file!".
I also got another question. Is it really necessairy to format my ms before flashing. Because I only got the hancock ms and it said not to be working again when I format the ms. Thats why I didn't format the ms yet and only tried without formatting.
I have read almost all tutorials but all said I must use the hard-spl but other forums posts said I don't need when using a official rom. Anyone can help me a bit further please?
Regards,

Categories

Resources