Database Develop

WiFi problems

Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?

Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)

10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.

Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...

I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings

Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..

klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/

ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..

ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.

I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works

ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.

Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question

wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...

I have same problem with my Diamond.

1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)

bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..

Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"

All of this do not work for me too...

Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.

in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(

Any other suggestions?

Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.

Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers

Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

Tilt Wi-Fi Problem after WM6.1 Upgrade (official)

Hi, I've had my Tilt for a while now, and I just updated to the new WM6.1 ROM this morning. However, after the upgrade, I could no longer get the wifi to work. I can connect to the wireless networks (tried different networks both open and secure), but when I try go to a website or use the internet, it just sits there and then says cannot connect. I have tried everything I can think of to fix the problem. I tell it to connect through work and through the internet, and messed with some other setting but that wouldn't do it. I plugged the tilt into activesync and it used the computer's connect just fine. Anyone having or had this issue, or have any suggestions?
Chris

Did you install the remove hidden proxy CAB?
If not, go here and get it:
http://www.4shared.com/dir/6996097/3f1f5d36/cabs.html
It's the removeHiddenProxy4CWS_0522 file
There may be others that do the same thing.

I installed the hidden proxy cab on my tilt, and the wi-fi still isn't working. Any other suggestions on fixing this problem. It's killing me. I though I'd be able to upgrade and reinstall all my files in just over an hour before I ran into this issue.

Update: Okay, I reverted back to the previous WM6 ROM and the wifi worked with absolutely no problem right off the bat. I don't understand what the issue could be and whether anyone else is having the problem. I'm going to try the WM6.1 ROM one more time, and then give up. I have to have wifi because I'm not willing to fork out money for a data plan. Any solutions or suggestions would be greatly appreciated.

change the power mode for the wireless mode to 'Best Performance'. This worked for me. Start -> Settings -> Connections -> wireless lan -> Power mode -> Best Performance.

Work Around For Wi-Fi Problem
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410

Park said:
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410
Click to expand...
Click to collapse
Hi, I tried you solution several times, but still could not get the problem fixed. I guess I am just resolved to going back to the WM6 ROM. Thanks for the info though.
@abhijitray: I already tried changing the power settings when I first began having problems, so that's not it.

i have the same problem with my Tilt. But i found that when i connect to my PC with the USB cable, ActiveSync is on, my IE works fine. With Wifi connection, IE is still dead.

maybe an off topic question, but what does the new rom have that the original rom that came with the tilt doesn't? anyone have a link or something, or is it something like better batter performance? thx

i have tilt with the latest official WM6.1 ROM, and have no issues with Wifi.

Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak

another thing I have noticed on my router is that my Tilt is not sending a hostname along with the DHCP request. Could that be the issue on the WiFi connection? I am wondering if that confuses the router.
Tom

I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.

pasole said:
I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.
Click to expand...
Click to collapse
I see the same here - I think that by changing the channel it reboots/resets the router and allows you to try again.
ps. don't worry about your english. If this board was in a different language, I am sure that most people here would not even be able to post a thing.

kojak_nyc said:
Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak
Click to expand...
Click to collapse
Well, your problem sounds exactly the same as mine (WM6.1 official). Maybe I should have tried a public hotspot, but it just wouldn't work on my home network (I even cut off the encryption and made it open). I downgraded back to WM6 ROM and everything working fine, so I guess no WM6.1 for me.

It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.

For me, it was the opposite. I could get WiFi to work at my office on Mobile 6.0, but I couldn't get my network at home to work. I have a Wireless-N network at home, and even though I set it to B-G only mode, it still wouldn't connect. As soon as I hit WM6.1, everything was fine.
Unfortunately, this happens more than one would think with Wireless network equipment.

kojak_nyc said:
It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.
Click to expand...
Click to collapse
Kojak_nyc,
You hit it on the head. It is a router issue, although its not limited to the D-Link router because I have a 2wire HomePortal 1000HW and it also doesn't work. It is also on 802.11b, so that could also be the issue. Something must have changed between in the settings the WM6 and the WM6.1 upgrade. I'll go ahead an inform HTC of the issue (not that they'll do anything).
I believe that the once the tilt is updated to WM6.1, it no longer works on IEEE 802.11b.

I think this is a Dlink issue. I've got a linksys router at home and it connects to that fairly quickly. ssid on that isn't hidden cuz i've got vista machines that have a hard time connecting.
anyway, at work i've got a dlink di624, 802.11g, router and i've not been able to connect the kaiser to it. i think tomorrow i'll do what was suggested and just play around with the channels and find which works. the dlink's set to automatically choose the channel it uses so i'll hard code it for a channel i know the kaiser'll scan for and then see what happens.
if it doesn't work i'll juts keep using the 3g connection... i do have 6GB/mo and haven't come anywhere near using it up.

Experienced similar problem just now. I just upgraded to WM 6.1 and my WiFi connection's been unstable since last night. I have a wireless router with excellent signal on my room and enjoys streaming video before I upgraded to WM 6.1. When I reset the phone it restored WiFi connection again.
Hope you could share some tweaks to resolve this problem.
Thanks.

Connection problems 3G/Wifi

Hi guys!
I have a Touch Diamond 2. It's great and certainly an upgrade from my Touch Cruise!
I have a strange problem though. Whenever I try to connect through 3G (T-Mobile Netherlands), immediatly after it makes the connection, it gives the dialog 'cannot connect etc'. 3G is truly connected but no data is coming in.
Now I have found where the problem lies, sort of. 3G works fine when I don't configure my home Wifi connection. Whenever I configure that, 3G stops working. It doesn't matter if Wifi is turned on or off. 3G does have a dynamic ip, where my Wifi connection requires a static IP. But I make all these settings in the Wifi part of the configuration screen, the IP details are under the 802.11 b/g network card.
This used to work flawlessy on my Cruise. Anyone have a solution? Thanks!

good morning. as you are with tmobile i'd suggest you are having the same problems as me with tmobile uk. for some reason tmobile sets up a proxy server in your 3g data connection setup, this caused huge problems for me but clearing it solved them all.
try this first and see how you go.

Possible, but where exactly do I change the proxy settings of the 3G connection?

BeQuietAndDrive said:
Possible, but where exactly do I change the proxy settings of the 3G connection?
Click to expand...
Click to collapse
Hey that's a coincidence, just read the same question at GoT
I have similar problems.
Now and than my HSDPA connection works good, but at some moment I just can't reach any website.
Disconnecting and reconnecting to HSDPA sometimes helps, and sometimes I just have to wait a few minutes and than it works again.
I also tried another DNS (OpenDNS) but it doesn't solve the problem,
Proxy settings can be found at (I assume your dutch):
Instellingen> Meer> Verbindingen> Verbindingen> Mijn proxyserver instellen
At my TD2 is no proxy set, so thats not the cause.
Hope sombody else can help!

Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.

I had exactly the same problem with my D2. I also had it on my Cruise with the later ROMs. The official HTC 6.1 ROM did not have this problem.
I experience it when I set up my wifi 802.11b/g network card in the phone to have a static IP address and set the default gateway. If I use DHCP there is no problem.
Setting the wifi card up on the phone DEFINITELY screws up the cellular data connection.

BeQuietAndDrive said:
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
Click to expand...
Click to collapse
I use a dynamic IP, for me it doesn't work.
With my dear old Wizard (MDA Vario) I had no problem at all with the same settings!

yup thought i was the only one with this problem need a fix for it soon man otherwise we are gettin bumped for not havin the settings coz we on t-mobile

I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one

for me i find that the web sites work but any app that requires to go online ie facebook, msn, sky fire etc jus dont work wen you try to connect online......... stupid t-mobile

My connection problems are gone.
Maybe I (we) encountered hickups with the T-Mobile proxy-server....

maybe You can help me.
I have a MDA V (germany T-Mobile) and i can not connect to my AP here at Home.
I have a ASUS WL500g configured as AP behind my Firewall/Router. All other device in my house, a Laptop, a Netbook and a 'WII' working fine!
All get the IP from the Router, the AP works transparent.
D2 will not connect. The Mac-Address from the D2 is configured in the AP, and i can see the router statuspage and see the MAC of the D2 sometimes in the list. But only as "associated" and never as "associated authorized" as the Laptop here in example:
-------------------------------------------------
Stations List:
-------------
00:23:76:yy:xx:xx associated <-D2
00:1C:BF:yy:xx:xx associated authorized <- Laptop
--------------------------------------------------
I configured a lot in the settings, but i cant get the D2 online with wifi.
Can someone plz help a bit?
-
other question: if i manage the problem some day, is it possible to configure the Networksettings of the D2 device in the way that the device only use USB and te WiFI-Connection to access the internet? I hat it that the device use mobile-internet connection without asking me to do so.

Same problem
BeQuietAndDrive said:
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
Click to expand...
Click to collapse
I was experiencing the same problem, only with the difference that I am using 3 different Wi-Fi adapter settings every day (for 3 different networks - two with fixed IP and one with DHCP enabled. Most elegant solution that I came up with was a small, but very handy application called "WiFi Profiles". Settings for WiFi adapter are easily changed by choosing a profile that you want to use and applying it. Before you disconnect from WiFi network, you just set adapter to DHCP, and after that your GPRS/3G/HSDPA connection works like a charm. By the way, I am proud owner of Touch HD but I am using Dutty`s Topaz based rom V3.4 XTREME SHIP.

Internet connection over WIFI does not work ..

Hello,
I am new to Xperia X1, just for 2 days. I am trying set up internet connection over WIFI, but no success after several hours of configuration.
- I have original rom, no extra apps installed yet
- I made factory reset on my airlive router and made only necessary setup checking then with notebook(win os) which connect to inet properly everytime..
- I can connect to AP from X1
- I can see IP served by DHCP in X1
BUT I cannot open and display any internet webpage in explorer nor running i.e. google maps preinstalled application which need internet connection. In explorer I can see messages as "connecting", "retrieving" and then "page not found" .. (in czech language) I tried in X1 explorer open only "IP" webpage but no success (if DNS in X1 fail). I tried WPA and non secure connection with AP, X1 connect fine, does not matter wireless type connection, but internet does not work.. I also tried setup IP GW DNS etc manually and it did not help..
Internet over GPRS is fine.
I have already no more ideas how make alive this basic and most important function in X1. You know, I expect tap "next", "next" and "done"
Could you help me or give some tip(s)?
Thanks a lot !

settings->connections->connections->advanced->select network
in the dropdownbox's pick
my homenetwork or what ever the non isp connection is named on your setup
and thats pretty much it
if you want to use gprs again change it back

I removed SIM card and switched off phone module avoid internet over gprs and I spent some time with your tip, but it does not work for me :-( I think I already tried all combinations, ipconfig on x1 would probably help..

sounds like it's an issue with your wifi router then
I would try another router somewhere
and update the router firmware they release fixed firmware for routers once in awhile
also just turning off the router for 10sec and turning it back on
that does the trick for me when my hdcp function in my router gets confused
and refuse to let my x1 and ipod connect
of cause I have the latests firmware in the router

next progress: I had coffee in restaurant with free wifi hotspot and I was able connect to internet on 1st try.. No extra configuration on X1 was needed..
so there must be problem at my home with:
1) Access point Airlive wl-5460
2) ADSL Router cellpipe from lucent
As I mentoined I made factory reset on accesspoint and several times disconnect it from electricity which did not help. I will try connect my AP to some friend's network outside home. I believe this is step how I could find device which do not like my new X1. btw I guess it will be adsl router..
wish me luck..

solved: wl5460 upgrade e8 -> e17
and it work great!