I have an AT&T tilt and I just upgraded it to the WM6.1 ROM from the HTC webpage and since then I have noticed that when I turn of the screen, all of a sudden it just lights up for a sec and turns off again, without any reason, is there a way to fix this, do i have to flash it again? what do I have to do?
i have the same issue, seems like after i flashed it happened.. any ideas?
one cool feature is that when it flickers, if u press the screen constantly, it flickers.. like a strobe light.. lol
I have the same problem. It's annoying because I think I'm getting a text or call. and usually I don't receive texts, i have to see it light up then press the mail button to see if I have a new text. ARGH.
My Tilt does the same thing. It's a whiteish-gay light. It'll come on for short bursts or I'll notice it on in the middle of the night, and who knows how long it's on until I notice it.
I had upgraded to WM6.1 a while back, and didn't have any issues, but had to hard reset my Tilt and it has been doing it since.
It doesn't do it all the time, either. Weird.
Mine Does The Same Thing
I hope there is a fix some time for this ..
I'm glad i am not the only one, but havent found a fix yet
I seem to remember there being an issue with screen flicker when the Tilt first came out, I think it was related to having Telnav selected in the today screen items tab. Try removing the checks one item at a time from the items tab, I doubt it will be as simple as a software conflict but it could be worth trying.
I had an issue with SPB Pocket Plus on my today screen, once I moved it in to a tab on SPB Shell the issue disappeared.
Fixxed?
I dont know if it just stopped doing it, I am not paying attention anymore or if one of the many things I did finally worked, but the truth is i havent seen it do it again, Thanks to everybody
It been happening on my Tilt since I got it last month.
This is happening on my tilt too... only after upgrading to 6.1. Glad to see it is not just me, but very concerning that this is a problem directly in the 6.1 TILT rom.
Bump........
Any body have any luck on this? I continue to have this problem.
Adding my voice and another symptom
is anyone else having this problem:
1. lock the tilt by tapping 'device unlocked'
2. tap the power button.
3. the backlight comes on, no picture but instead of flashing it stays on draining the battery
4. tap the power button to turn the tilt back on
5. tap the power button to turn tilt back off again
6. tilt stays off.
the issue did not change with the backlight hotfix.
Maybe try another ROM
Finally, i found others with this stupid glitch
I thought it was a hardware error, so i had AT&T send me a warranty/replacement, and guess what... comes out of the box and STILL DOES IT! Has anyone with this problem tried installing a DIFFERENT ROM, like one from the XDA forums? I'm about to try that, because i am fed up with this. I will report if it works. ARG!
Sorry for the ranting. but in a way, i'm relieved. that there are others with this problem
... It might pay to just go back to Windows Mobile 6.0.....
-=ZYXTIA=-
Different ROM fixed problem, but just had more problems after. Sorry guys.
Me Too...
I am glad that I have found other people with the same issue as me. I thought it was just my phone, as I do a lot of backups and restores after I do something stupid with my phone and I also use a lot of beta/unstable software, and figured it was caused by these. However, it only happened after I upgraded to 6.1 stock ROM. Maybe somebody can figure out exactly why this happens, and then we can come up with a fix. I am just happy that I'm no longer alone with this issue
-Dave
I'm very pleased to know that it isn't just me experiencing this stupid backlight issue.
It started happening the second I upgraded to WM6.1
Funny thing is, it only happens to me if I Lock the phone (keys) and turn off the screen. If I just turn off the screen without locking, the backlight stays off.
It would be really great if someone could come up with a fix for this that doesnt require me to reflash my phone with some cooked up rom
has anyone tried this hotfix?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
i'm experiencing the same problem, will try it and post back as soon as i can
edit: didn't work. got some error about it couldnt remove the old customization tool or something like that
Running the AT&T 6.1 ROM and silly thing turns on by itself at 12 midnight. No connection to anything as I leave it in Flight Mode. Only goes off after I hit the Power Button. Drains the battery down to about half by the time I leave for work at 7AM.
Really is annoying!
Possible Solution
If you are still under warranty, call up AT&T warranty replacement (Customer service is 1-800-331-0500, and just ask for warranty department), and tell them you have this problem. TELL THEM YOU THINK IT IS A HARDWARE ISSUE, and they will send you a replacement, refurbished Tilt. The next one will also have WM6.1 on it, and do the same thing. HOWEVER, it is AT&T policy that after two replacements, instead of getting another one the third time, they give you a refurb of a DIFFERENT MODEL. That is how i got the AT&T FUZE (a.k.a. the HTC Touch Pro, a.k.a the "Raphael"). It doesn't have that problem. But otherwise, i have no other suggestions. i'm just sick of having AT&T screw up the phone's software, and then try to pass it off as quality.
Mine comes on exactly at midnight!
Annoying as hell...and the light from it wakes me up from across the room.
Mack
Related
I have now done several test and have found what I believe is a serious bug in the ROM, making the Kaiser virtually useless for business users.
When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work.
I have now made several hard resets and used two different SIM cards. However, I was not able to try this on adifferent device. Therefore, I would be grateful if somebody could try if they experience the same issue. Disabling the device password fixes this, so you won't be stuck if you try.
I will return my device tomorrow for a full refund, unless the store can show that this problem is specific to my device and that a replacement unit works properly.
Many thanks for any help!
Cheers
Magxs
what rom are you using? I have not seen this problem at all on the various AT&T ROMs.
I am using the official & released HTC TyTN II ROM on a device branded as such. Got the device on Tuesday as official retail unit, so it is not pre-production or beta.
Interesting to hear it works on the ATT ROM. HTC must have messed it up. Maybe it is just my device.
Thanks for the info.
Ok, there is a workaround now that I can live with for the moment. All you have to do is to toggle the power off and on when it hangs and it is all back to normal. Not too bad.
Hope they fix it though...
Same error for me!
Hi Magxs
I cannot tell you how pleased I was to find that someone else has experiencing the same problem! I have _exactly_ the same issue. Like, you, I use the phone for business use so there is absolutely no way I can use it without a device pin (well done on discovering that by the way). As you mention in your last post, switching it on & off fixes the issue but it's a bit of a pain.
HTC have got a good reputation on getting fixes out quickly so let's hope that'll be the case here.
Ben
Always good to know you are not alone with a problem. I also have a thread about this over at MoDaCo: http://www.modaco.com/Bug-Device-password-fre-t258974.html
The issue is getting some attention now. Just hope it is enough for them to do something about it.
Hi
I have built a small application that will hopefully resolve this problem, it is over on the thread at: http://www.modaco.com/Bug-Device-password-fre-t258974.html
The problem with the Kaiser seems to be because on a call when it has a password set it's entering an "idle" mode rather than just turning off the backlight. Idle mode is something normally not used on PocketPCs. Once in idle mode it responds to key presses etc but doesn't leave "idle mode" so it appears frozen or in an odd state as nothing lights up!
Regards
Phil
I experienced even more issues!
Please can you share with me if you have found more complete solutions?
I experience "freezing" after long calls, same as you.
But also when replying to SMSs
Even when the device is not used for some minutes: first backlight goes off or almost off, then the start button (software and hardware buttons) become not responsive:solution? Soft reset! or wait 25 secs
Please help
Saulo866
Problem is widespread
I too have this exact same problem. If the phone screen goes off during the call, the end button will lock the screen. Have you noticed that pressing and holding the end button puts a screen lock on the device?. Never seen this in any other device. Normally holding the end button cancels the Data (HSDPA, GPRS etc) connection. I will try the solution and see how I go.
This is just one of a number of problems. I also find the phone goes in "Roaming" mode even when connected to my own provider, and there are annoying problems with calendar synching. Gr8 device...but!
KaiserCallEndFix.exe needed
I cannot log in to Modaco. Even after registration, no validation email sent to me. Can any friend here post the fix for TyTN II ( KaiserCallEndFix.exe) here, so I can download it!
Thank!
This has gone rather quiet, I'm using the Reg edit listed earlier that forces screen to stay on during call but it's not ideal.
Anyone else solved it besides the button press workaround or Phil's Exe file?
I also suffering a different side effect from this problem.
I choose to deactivate the lock function to avoid the on-off procedure after the end of everycall. But every 1-2 days my device stops working because it starts asking for the lock (even though the lock function is disabled!!!!!!).
If I soft reset the device the problem disappears. Does anybody also have this problem?
Is there any news on when HTC will definitely solve this issue?
this problem stilll exists. thought it was just me. Just got 2 phones from orange - complained tothem about this bug & they sent 1 replacement phone. even though I told them it was a software issue. new phone arrived and problem is still there . Orange have escalated the issue to their technical people. I await their response. I also spoke with HTC technical support in the UK who claimed not to be aware of this issue. One thing they did agree with was that if youhave a pin , when asked to input the numbers upon switching on the device , the screen goes half dimmed so you cant see properly what you are tapping in. no mention of a fix anytime soon though. lets hope HTC do sort this out an drelease a fix because I do really like this device.
great forum btw
My phone has had this issue since I got it back in Feb/Mar 08, i just hit the power button on/off and dealt with it. I'm suprised this thread is months only and HTC hasnt fixed it yet. Why are they so slow to fix issues?
omg, thanks god that i am not going crazy,
ive been using a mda vario 3 on t-mobile,
since dec 2008, got the same freezing problem...
hoping for a update to be released by htc etc, then got a replacement phone after 6months, and still same problem.
i just spoke to the technical dept and he doesnt know any problems with this,
thanks for the insight on how it occurs.
so now im gna have a serious complaint abt this, to t-mobile.
and get htc to sort it out.
heheh
ive read some others having this problem, i just got my tilt and if its asleep for a while when i go to wake it up the screen stays black. the lights still flash at the top and the key board back light will sometimes come on but the screen will not come back. Ive tried every button but the only way it seems to come back is taking out the battery and replacing it then turning the phone back on. is this a wide spread problem or just a few devices (warranty worthy?)
any insight would be great
side note: ive only added a few plugins, have not done any thing yet to flash the rom at all - i am weary of trying this now because of the issue im having
Tilt not waking up
Install and run KaiserTweak. If you're running the AT&T Rom I'd change to something else as it's quite buggy.
Some people have suggested that having the automatic device lock enabled causes this, so you may want to try disabling that. Also do a search on here for the "sleep of death", that may help you figure out what's wrong.
Here´s another discussion of your problem.....although no definite solution, I believe.....good luck!
http://forum.xda-developers.com/showthread.php?t=339792&highlight=sleep
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html
I have done a reasonable amount of searching on this and have not found anything specific to my problem so figured I should post a question.
I have an issue with my Dimaond when it gets hot generally either using Wifi or Phone Data connection that the screen goes out. Basically everything goes to the left side of the phone so if you hit the Task Icon in the top right corner you get the Start Menu. Phone is basically useless at this point and you have to wait for it to cool down. Has happened since day one and is generally worse when using it when charging. I was watching Utube on it the other night 5min video while on AC charge and it went out. I am running Dutty 2.5 Rom and 25.07 radio have tryed 25.08 and 25.05 no difference was happening when the phone had orginal HTC ROM as well. Also will happen on a long call if the screen is on.
Basically feel issue is hardware related and maybe faulty screen still under warrenty so wanted to know peoples opinion on weather I should send back. Problem is will take a couple of weeks and I don't really wnat to wait that long if I can help it. Also assume it would be best to flash standard ROM back, should I do anything with HARDSPL eg should this be changed back as well if I send it back.
And before anyone says it I have tryed searching this topic and have found lots about HOT dimaonds but nothing related to screen going out at the same time :-(
Thanks
I had this issue in my JasJam (Hermes) whre the screen would simply go white after a while of use and I would have to leave it for a while for it to work again.
Unfortunately it sa hardware issue and you should claim a warranty repair on it
I can't see how this could be a software problem so I figured it must be the screen eg hardware related. Would be nice to know if anyone has had the same issue with a dimaond... Seems we may be spending some time apart, just hope it doesn't take long to fix..
I've had the same issue
http://forum.xda-developers.com/showthread.php?t=428976
My first device had been replaced recently (i.e. today) by my network provider (o2) and the new device seems to work without any problems now even if it's "hot".
(i.e. default screen adjustment + creating heat by activating the phone, wlan, bt + recharging it)
I sent an email to HTC regarding the fault and they said it would have to go back for a warrenty repair. I brought it through a resellar so has to go back to HK from NZ so will be away three weeks uurggghhh... Just seems odd I don't have any physical damage on the screen but hte problem has been around since day one as I remember having the problem the first day I got it. Juyst seems to be getting worse and is easily reproduced by usiung utube over wifi gets hot and it is all over. Just wondering if I should put an offical ROM from HTC back on the device before I send it back as I currenty am running Dutty ROM, what do you think....
i put the original rom back on and they still found out the the rom had been flashed, and would not repair on warranty
yep, i also asked about this problem
http://forum.xda-developers.com/showthread.php?t=438733
there are some youtube video's of how the phone behaves
my phone seems to do it less frequently since stopping using panosha's rom
im using alpha zero 7 at the moment..
i've also noticed that it isnt necessarily a heat issue, my phone does it completely at random
yesterday i found though, that when the phone did the alignment issue, i gave it a good shake.. and hey.. its all aligned again?!
maybe it was just a fluke, it hasnt freaked out since..
holding thumbs
Hey,
I also have the same screen problem, but my Alignment goes to right.
If I press on the left side, a press on the right side is recognized.
Good to know that Im not the only one with this problem.
greets doena
I got my phone back a week ago replaced the screen has been away for over two months, complete disaster, anyway all sorted now and I have not had the problem since....
I had this exact same issue (out of the box).
It was a hardware fault and I exchanged it for another one.
Haven't had any problems since.
Minus-1 said:
I had this exact same issue (out of the box).
It was a hardware fault and I exchanged it for another one.
Haven't had any problems since.
Click to expand...
Click to collapse
Hardware's fault ? Most likely not. I will give u an example of why I think it was software related. My device ran hot as well but I simply switched roms and now it's the complete opposite. Your most recent device most likely come with a different Rom in the phone.
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.