Jawbone 2 - Tilt, TyTN II, MDA Vario III General

Having some difficulty with my Jawbone 2 and WM6.1 Hypergragon Rom.
The main issue is that calls come in and they are getting answered as soon as it starts audio in my ear, It rings maybe a half ring in my ear and then it connects without hitting any buttons.
The other thing it does is it seems when I hang up from a call, I hear a short tone and it seems like it might be disconnecting, then connecting to the bluetooth.
Any ideas?

powergator said:
Having some difficulty with my Jawbone 2 and WM6.1 Hypergragon Rom.
The main issue is that calls come in and they are getting answered as soon as it starts audio in my ear, It rings maybe a half ring in my ear and then it connects without hitting any buttons.
The other thing it does is it seems when I hang up from a call, I hear a short tone and it seems like it might be disconnecting, then connecting to the bluetooth.
Click to expand...
Click to collapse
Any ideas? anyone?

Man, I guess everyone left.

I have a Jawbone 2 as well and I dont have the issue at all. It sounds like the button on your jawbone is stuck.
-McMex

I also have some trouble with my jawbone mainly just sound quality does anyonehave any advice on any twicks to make the sound quality better

I returned my Jawbone because the sound quality was so bad on my Tilt. I have had 4 bluetooths (blueteeth?) now and have finally settled on the best one hands down. The Plantronics Discovery 925....the absolute best in sound quality and loudness and it fits INSIDE your ear, it doesn't hang off your ear loosely dangling - expensive but well worth it. 120.00

Related

Does Diamond Bluetooth suck or is it my HF?

I recently got a Jabra BT3030 for use as a HF and possibly music player. The only other choice in the shop was the SE DS200, so I thought meh the Jabra is a little cheaper and probably as good.
The HF works just fine: simple connection, buttons all work and people can hear me talking just fine. The only issue being the quirky music/volume after turning it off, but its no big deal.
What's wrong is the HORRIBLE, ABYSMAL, DOWNRIGHT UGLY sound output. There is a constant hissing in the background, its like a slightly offset radio station. I may not be an audiophile but every test/review I've read of this including user impressions say that the quality is "good", some even claim its "like wired earbuds". I dont call this good at all and its as far away from wired it can be.
However I've been unable to test it in another BT phone (wont work on my old SE K600i) as my main suspect is the phone, not the Jabra.
Unless of course, BT handsfree on the Diamond is meant to hiss? Or is the Jabra actually this bad quality? Anyone know that's used far more BT than me, as the Jabra is.. well, the only one?
I own a Anycom BH-100 and it shows constant hissing as soon as connected to any device (PC USB dongle, HTC Magician / Hermes / Diamond).
Good thing is, when the music plays it's nearly gone ( = can't hear it anymore).
Hm, I suppose it bluetooth really is that bad. It hisses when I try to connect to my HP portable too.
My BT-headset gives a rather friendly quality. No hissing whatsoever, but it does have a little second of lag very occasionally. Much better than my old Nokia 6300, in any case.
So you wanna tell us, that you don't experience any difference between your headset being switched totally off and being on but no actual music playing?
3030 user here.I'd described the hissing present but not so much bothering. Not that I have much BT HF experience before, used entry level Jabra BT135 with N6120c. There I'd say was little bit of less hissing.
tha_rami said:
My BT-headset gives a rather friendly quality. No hissing whatsoever, but it does have a little second of lag very occasionally. Much better than my old Nokia 6300, in any case.
Click to expand...
Click to collapse
Well lag/slight stuttering I would understand since it is wireless, but this is a constant background hiss independant of any lag.
Well f**k me sideways on a wheelbarrow!
The Diamond is not at fault at all. Its the Jabra that STINKS.
I tested a DS200 here at work at its got nothing of the hiss on the 3030. On the 3030, I clearly hear when its activated (*ELECTRONIC CLICK*hsssssssssss...) and likewise when it goes to sleep. On the Sony, I hear *nothing*. Its utterly silent. Well, aside from the music.
I'm getting this exchanged ASAP. And to think I was blaiming the Diamond
no problem with my diamond!. excellent quality both with my stereo headphones playing music or with car BT device. the connection is instantaneous and no background noises.
i must be lucky...lol. i have no lag with iGO8, my camera is taking good pictures and generally speaking i have nothing to complain about i am embarrassed...feeling left out
I thought I'd resurect my thread with an update... It appears that its NOT the Jabra at fault. I got it exchanged for a new one (the store didnt have a DS-200 at this time) and my conclusions stands at this:
- Listening closer to the Diamonds top speaker (like putting my ear to it, not good to do lol), it has the exact same type of noise. Its just that the volume of sound is so much greater its immiedietly drowned out. In other words, the Diamond behaves like this.
- Listening closer to the Diamonds package wire HF, it once again has the exact same type of noise, but here it is considerably lower and you really have to listen hard to it to hear: its not really noticable during playback even on lower volumes. So once again, this is how the Diamond sounds.
- The Jabra 3030 exaggerate the noise 10x, hence why its so annoying and with poor quality. Listening on low volume is drowned out by noise.
I got to see if I can try my buddies DS-200 again, listen closer this time... I'm starting to suspect that its a matter of how good the signal processing is on the Jabra, due to the Diamond sending out a noisy signal. If the DS-200 handle audio like the wired HF (same behaviour, much less noise), then its obviously "as good as it gets".
Sounds to me like there's something wrong with your Diamond, I can't hear any hissing through mine with the included (wired) headset or from the speaker on the device.
poedgirl said:
Sounds to me like there's something wrong with your Diamond, I can't hear any hissing through mine with the included (wired) headset or from the speaker on the device.
Click to expand...
Click to collapse
I suppose that's possible... But did you listen real close? I cant hear the noise from the speaker unless I stick my ear to it and the wired noise is very subtle, unnoticable during playback. Maybe I just got sensitive ears
I have tried the DS-200 again and got a background noise level that's much closer to the wired level, though a little notch higher. And its far, far lower than the Jabra. In particular, the electronic sound on turn on/off is not that noticable while the Jabra make my ear twitch.
murklor said:
I recently got a Jabra BT3030 for use as a HF and possibly music player. The only other choice in the shop was the SE DS200, so I thought meh the Jabra is a little cheaper and probably as good.
The HF works just fine: simple connection, buttons all work and people can hear me talking just fine. The only issue being the quirky music/volume after turning it off, but its no big deal.
What's wrong is the HORRIBLE, ABYSMAL, DOWNRIGHT UGLY sound output. There is a constant hissing in the background, its like a slightly offset radio station. I may not be an audiophile but every test/review I've read of this including user impressions say that the quality is "good", some even claim its "like wired earbuds". I dont call this good at all and its as far away from wired it can be.
However I've been unable to test it in another BT phone (wont work on my old SE K600i) as my main suspect is the phone, not the Jabra.
Unless of course, BT handsfree on the Diamond is meant to hiss? Or is the Jabra actually this bad quality? Anyone know that's used far more BT than me, as the Jabra is.. well, the only one?
Click to expand...
Click to collapse
I have a Jabra BT3030 and it works just fine in fact its perfect... Are you using a stock rom by anychance... if so what version...? you may want to use a cooked rom with the latest O/S.. as this does solve alot of BT problems...!
I am using the latest official (1.93 I believe it is). I dont quite see how a cooked rom will change the bluetooth performance of the handsfree (as a sidenote, I have tested removing those two bluetooth variables in the registry that according to another site would vastly improve quality: it did absolutely nothing)... But granted, I may just try it tonight if I ever do figure out which one to use, lol.

Jabra BT8040

VERY COOL BT EAR PIECE!
The thing i enjoy about this the most is the ability to listen to music from my phone! I was kinda sketchy to the concept, but it is MONO sound, and sounds very good. The sound quality and volume is nice.
The ear bud fits snug in my ear and doesn't slip out or bounce around when i turn my head.
Since it allows music, you can also hear your ringtones, applicaiton/game noises, and other sounds your phone makes.
Another rad feature is the "MultiPoint" connection that allows you to connect up to 8 devices, and have 2 working at any one time.
It's a small ear piece, but is good quality, sounds great, and works well!
http://www.jabra.com/Sites/Jabra/NA-US/Headsets/Pages/JabraBT8040.aspx?productfamilytab=Overview
i really like the looks of itt nice and small
i was jus wondering i have a HTC TOCUH from bell
and with this bluetooth will i be able to hear songs from my phone
in other words i can use this as a wireless headphones too?
cause couple of days ago i stopped by to look at some bluetooths
and the guy at the store told me tht HTC TOUCH doesnt support that
soo no metter what bluetooth u get it wont work.
and that was disappointing soo then i didnt buy one.
I just bought one of these... they're on sale right now at:
http://www.2daysbargain.com/
It ends today so you need to make up your mind pretty quick.
HTC Touch supports A2DP which is the main thing in supporting stereo music. The BT8040 also supports this (majority of mono headsets won't), so you shouldn't see any issue using the two together.
I hope at least... that what wryun mentions he's doing. It's also what I plan on doing. And from other reading it sounds like there won't be an issue.
I had one of these. In theory it could have been the greatest earbud ever. Unfortunately I had constant issues.
First, you cannot keep it in the traditional diagonal position for an earbud as the microphone rests on your cheek and is thus muffled.
Second, and this is what really pissed me off, the mic eventually stopped working. I would try the voice dial and it would never register my voice. Call after call would come in and I would answer without the caller being able to hear me. Seriously, the only way I could get it to finally work was to throw it at something...i.e., the ground, my dashboard, my windshield, the walls, etc...
I retired it and it has since been lost, possibly in the wash. I currently switch off between an invisio g5 (as small as the jabra with few issues) and a Samsung WEP470. Neither have A2DP and I must admit I miss that, but actual functionality is more important to me.

[REQ]Reducing volume sound

Is there any way to reduce the calling sound of X1? (The speaker on the top of the screen) Mine is so hard, even on the lowest volume. When I set the volume to the highest volume, it is like I have set to hands free. Its really annoying to have the sound that hard, because the people who are next to me can hear the voice of the person who I'm talking with. When I talk a few minutes, I even get a headache.
Why don't you turn off the Speakerphone?
Seriously, I constantly move the phone a bit away from my ear. I can hear it anyway Anyone who can help me with this?
I also suspect that the sound is coming out of the speakerphone and not the earphone. Ensure that hte speakerphone is turned off on your phone while calling. Maybe you've change a setting somewhere? Another reason could be that you are using fring or skype to call.... the calls are diverted to the speakerphone instead of the earphone when you use skype or fring. There is a tweak available to redirect the sound to the earphone. You can also use headphones instead.
Thanks for your reply. I dont use fring or skype. And I know that the sound comes from the earphone. I have tested it by putting my finger on the speakerphone and earphone. The hard sound comes really from the earphone.
Where is the tweak to redirect the sound to the earphone btw?
I have the same issue, and no matter which ROM I've used the earphone minimum volume is just too loud. Maybe there is a registry setting to lower it?
I hope so. Weird that less people have same kind of problem.
hello,
same issue for me....

Weird clicking noise from speaker.

Does anyone notice a very light clicking noise from back speaker when on speaker phone right after hanging up on a call?
Just the NSA, disregard.
Lol,thought it might have something to do with radio/network stuff or like u said nsa..smh
I notice it makes the clicking noise anytime the back speaker gets used at all,there's a light hiss then click,guess kinda like an amp would sound when being turned off.
No one else here it?
Raver27 said:
No one else here it?
Click to expand...
Click to collapse
Yes, I hear it. This has been audible on every phone i've had in recent memory, you probably just never listened for it before. Anytime sound is routed through the speaker you get the hissing, followed by the click as the amp shuts off 2 or 3 seconds later. Sometimes it's audible through headphones also, depending on the headphones.
Lol yeah only noticed, because when on call using speakerphone it clicks 2 or 3 times and it's just a tad louder then when turning off any other time,other wise probably would never heard it.
I have a N910F and noticed it this morning. I here it, it's like a frying noise, and if you get close enough you here it every time a sound is routed throughout the speaker on or off.
I'm on Lollipop 5.0.1 Baseband version N910FXXU1BOC3.
I don't think it's normal, Samsung is playing around with the audio system, you couldn't turn off sound completely until this ver of lollipop and still even when audio is completely off you can here the speaker fry when something is routed to it.

headset microphone feeding back into headphones (is this normal?)

The mic is unmuted and feeding back into the headphones during calls. When i scratch the mic with my thumb or adjust the volume rocker on the headset i hear the amplified scratching and clicking noises in my ears. When i talk directly into the mic, i hear my amplified voice.
It's NOT an ECHO... It's like when you pickup a landline telephone handset in your home. The mic is wired into the speaker and you're hearing your own voice piped back thru the speaker. Try scratching or blowing air on the mic of an old school landline phone and you'll hear it thru the speaker amplified in your ear.
This is what I'm talking about. My Galaxy S3 as well as most other Cell phones never used to do this. Why now? What's the purpose? So you can hear your own voice in noisy environments maybe? Doesn't seem truly necessary, more annoying than helpful imo.
EDIT: I went to the Sprint store and tested both my stock note5 headset as well as my bose headset on ALL new samsung phones and they ALL exhibit this same issue. When I asked the tech about it, she scoffed and said, "They are supposed to do that!"
So nobody gives a **** or has any clue about this?

Categories

Resources