Fix case without taking apart??!! - Tilt, TyTN II, MDA Vario III General

I tired searching but this is such a random problem, I didn't really know what to search for. So if you know of another thread - please let me know.
I was at my mall yesterday and saw that they had just gotten in new plastic covers for my Tilt. I was excited and wanted to see one on. They insisted on putting it on themselves. Major mistake... when she was taking the back piece of the cover off, she popped the case away from the phone. There is now a gap between my keyboard and the outer case by the camera button and power button.
I have tried for a couple of hours to get the piece back in where it should be to no avail. I still have a warranty on the phone so I don't want to just start disassembling the phone, is there some kind of trick to popping it back on without taking it apart?
I know that I will probably have to just let the tech at the store take it apart but I really hate to have him do that just in case I do need to use the warranty.
Thanks in advance!

I was trying to get to work and finally got it. There is a trick to putting that piece back. The keyboard needs to be pushed down right by the side and then it clips in. Thanks for taking a look!

Related

Help taking apart Tytn II (Tilt)

I have an AT&T branded Kaiser (8925). I spilled a tiny amount of soda on it about a week ago and ever since then the keyboard hasn't worked. It has come to life several times, but I think there is either still moisture or maybe some sort of syrupy residue left over. I have tried following Mike Channon's instructions but I am probably being legendarily thick. I can't seem to release the locks with the plastic stick. I don't want to force or be too rough as i'm afraid of damaging the phone. Could someone please help me? I would greatly appreciate it.
http://www.pdacenter.ru/razborka/razbor_htc_kaiser/
see this, good luck
i couldn't have explained it better my self HOWEVER, you don't need to take the screws from the hinges off (they are kind of a pain to put back on) you can just slide the screen half ways after taking it apart and guide the data cable trough there.
i have taken my kaiser apart 3 times already, (don't ask)

Moving couch = Broken Tilt

I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.
brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.
Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"
brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it
I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.
I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together
kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????
Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF
here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot

Has anyone replaced their trackball?

My trackball is broken or has dust in it. It doesn't move left unless I push it in while going left, and sometimes clicking it doesn't register.
Has anyone attempted opening the G1 to clean or replace the trackball? I was looking at the Dream pdf and it seems like quite a task.
happyface_0 said:
My trackball is broken or has dust in it. It doesn't move left unless I push it in while going left, and sometimes clicking it doesn't register.
Has anyone attempted opening the G1 to clean or replace the trackball? I was looking at the Dream pdf and it seems like quite a task.
Click to expand...
Click to collapse
Blow the dust out with compressed air, should fix it. Or just spint it vigorously for few minutes. I don't see track ball breaking that fast (it's not BB for crying out loud ). That happened to me few months ago and a little air fixed it.
Good luck
it isnt too bad to open up the phone and clean it, but dont unless absolutely necessary. Lots of connections that can be prone to damage, and some tape that needs to be carefully removed and reused or replaced.
I've tried moving it vigorously many times, which didn't work.
So I used my air compressor and blew air into it, and that didn't work.
Then I tried rubbing alcohol with a q-tip, and that hardly worked.
I have opened my phone, wow!
I have a bronze G1 and the keyboard is not viewable, found someone in hong kong selling them for 5 bucks so i bought the black keyboard pad and replace it. It was a pain and mind you, my background is totally different than most peoples. I have worked as a Electronics Tech for most of my life and have taken EVERYTHING apart as long as i can remember. That thing has some of the smallest connectors and tiniest screws i have ever seen.
Yes it can be done, the hardest part your going to have to deal with is the splitting of the internal case, they sent a small plastic tool with the keypad and without that i would have probably destroyed the phone in the process. If you can find a small plastic or wooden tool to do that part its not to bad and you do not have to go as far as i did.
If however you do not have a background in taking stuff apart and putting it back together again. AVOID doing so!!
Your phone will NOT SURVIVE most likely. First time took me several hours even with the G1 PDF which looks great till you have to rely on it. Only issue i had was i didnt get the camera connector plugged back in so everything using the camera force closed, that was my clue. So i had to open it up a second time, everything works now and love it but it was not the easiest thing i have ever worked on truth be told.
happyface_0 said:
I've tried moving it vigorously many times, which didn't work.
So I used my air compressor and blew air into it, and that didn't work.
Then I tried rubbing alcohol with a q-tip, and that hardly worked.
Click to expand...
Click to collapse
This same worked for my trackball, thanks

Raider digitizer glass shattered, anyone know the proper way to install a new one?

Yes, I already broke my phone. Go ahead, grin and chuckle..now that you've gotten it out of your system, anyone want to offer a little guidance? Never disassembled a newer cellphone before. New glass is ordered and has been shipped, just waiting for it to arrive. I'm hoping the process is fairly simple. I do have a specialized set of screwdrivers with all the hard-to-find bits, so that's not a problem ..it even has the tiny blackberry bit.. but from what I can see HTC uses standard micro Philips screws. Yay for standard formats!
Sent from my HTC PH39100 using xda premium
If this phone is anything like hd2 you're gunna want the flat pry tools they sell (search hd2 screen replacement tools). Their not needed but a nice handy thingy to have, other wise you might crack your LCD from flexing it too much.
Sent from my HTC PH39100 using XDA App
I wont grin and chuckle too much, I broke my Atrix after 4 days.
The Vivid screen seems very fragile. 2 of my coworkers have broken theirs within a few weeks of having them. Small drops from waist distance. Its too bad because I have seen the current Samsung models dropped from 6 feet face first and survive
Sent from my HTC PH39100 using xda premium
Yeah, I've cracked mine as well. If you google HTC raider teardown on YouTube.. There's a vid.... Butttt, it's not in English and it's a teardown not a screen replacement tutorial.
It seems as thought HTC has been using reeeeally thin glass in their devices.
Whered you get the glass? It'd be very thoughtful of you to do a tutorial as you do it. I really want to replacement mine but if you remove one on the screws by the battery it voids your warranty
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
How much is it for them to fix it?
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
travisxcore said:
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
Click to expand...
Click to collapse
I'll do that right now. Thanks alot
(sorry to hijack the thread lol)
They use a double sided tape that hopefully comes with your replacement screen , I tried to replace a water damaged screen and it really wasn't a fun process
Sent from my HTC PH39100 using xda premium
It didn't fall very far..
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
bproulx said:
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
Click to expand...
Click to collapse
So, how was the installation process? And did it come with the adhesive? I'm going to buy it from that site as well
And then it was fixed..! FTW!
Ok sorry for the delay getting back to you guys.. been frantically waiting for the screen to clear US customs (ugh) and arrive, which it finally did today. I was able to get my hands on it at about 3 this afternoon, but I wasn't able to actually look at it until about an hour ago..
So.. I open the package, big grin on my face..and the first thing I notice is that the glass is AT&T branded. Funny, considering I'm in Canada and using Rogers..but hey a digitizer by any other name...and all that. So! I open the bag that my "tools" came in.. There are 2 blue plastic tools, one a prying tool and one looked a lot like a guitar pick. Cool. There are also 2 screwdrivers included, and I'm momentarily excited, until I realize they're just tiny torqx bits. The Raider uses TINY philips head screws, so those were useless. I put them into my tiny tool set..for later consideration.
Back to the screen. Looks like it the real deal, so I watch half of the teardown vid on youtube.. As mentioned in an earlier post it isn't an english-language vid so aside from seeing the locations of the screws and the methods of levering off the internal components, there's no exchange of information going on. I would like to mention however that the video kind of glazes over the locations and removal processes for some sensitive connections, so having only experienced laptop repairs personally.. I was in fairly uncomfortable and unfamiliar territory - but I was determined.
I tried several ways at getting the phone down to its base components, and finally succeeded in locating the panel's ribbon connector interface on one of the phone's circuit boards. I had to remove the back of the phone, pull the batt, sim and sd, and pull the 4 main screws that lock the housing down onto the phone.. From there its a matter of levering off the black plastic shell and whats underneath is a whole lot of tech in a very tight space. There were 3 or 4 wires I had to disconnect, about 15 tiny screws in 3 different lengths, and then when all was said and done I had to pry the busted panel off using the supplied blue lever tool (pretty handy, actually.) and then lift the lcd away from the metal housing enough to slide the old connector out and the new one through.. This was a very tricky process - I drink way too much coffee to hold completely steady for long..lol.. Finally got it all through, but by this time I had smudged the inside of both glass surfaces pretty badly and it took some serious mechanical dexterity to hold the surfaces and wipe them down without wrecking any of the flapping, loose circuit boards, screens, etc.. it was a frightening experience.. I won't lie.. I definitely feared the worst possible outcome given my limited experience.
So.. the panel's ribbon cable is inserted, the white clip back down securing it.. I manage after several attempts to remember how to put the puzzle all back together, and after about 45 minutes of messing with it I had a visually complete phone again. I hit power, and miracle of miracles the HTC logo flashes on the screen.. I'm hopeful..
The phone boots up, looks great (aside from a few smudges I missed on the inside..grr) so I start touching the screen and here's where we have the first problem..lol.. its recognizing that I'm touching the screen..but not really accurately.. it seems to be that there are dead areas.. So now I'm thinking I broke something..lol..
Smoke break.
Took it all apart again, forgot to clean the smudges, removed and re-seated all the connections, and about 15 minutes later I had it back together again. I booted it up and waited.
Success!! It sees where I'm touching accurately now - I think the ribbon must have moved while I was putting it back together, I was shifting things a lot as I was trying to figure it all out, so I must have stressed the cable enough to move it slightly in the slot.. that, or I didn't have it all the way in / straight the first time I did it. Either way, it works fine now. I was successful on the 2nd attempt, and now the only difference is that this glass feels..rougher? less smooth? not sure how to describe it.. it feels different, anyway.. and the at&t logo of course. Aside from that, you'd never know it was in pieces an hour ago..lol.
Would I do this again? ..I hope I don't have to. Its not impossible, but man, if you're going to try this BE SUPER CAREFUL!! lol..
edit: and no - it didn't come with the double sided tape, but it seems to be staying without having to replace it.. it wasn't too hard to remove it from the panel, but getting it back on straight took some finesse.. lol.. it comes apart easier now when you're tryingn to disassemble it..but seems to be holding together fine on its own.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
Corning makes the glass on the Raider/Vivid?
I would suspect it to be more sturdy if its corning, my SGS has been without a screen protector and still does not have any scratches. Yes i know SGS is Gorilla Glass and this is not but i would think it would be stronger.
@ bproulx
You should take it apart again and make a tutorial . I hope i never have to go though what you did. Knock on wood.
lol..might take it apart again..
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
bproulx said:
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
Click to expand...
Click to collapse
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Getting better at taking it apart..lol..
Chism87 said:
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Click to expand...
Click to collapse
No, the little void sticker on mine was less like a sticker and more like... glue, with paint on it.. lol.. it just flaked apart when I tried to lift it.. but I wasn't concerned with preserving it. Maybe if u use an x-acto or something like that you can lift it intact..? Let me know how you do.
I started getting some random touch input glitches yesterday, and today they got worse.. then my son spilled hot coffee on me and I dropped my phone on the carpet where it of course popped apart..lol..and then when I booted it back up I had some *major* touch glitches.. it was seeing input higher up than the actual contact point, and just acting real buggy..the phone was lagging.. so I took it apart again, completely.. took my sweet time reassembling it this time - I even got out the micro-fibre cloth and cleaned all the glass, and voila.. this time - its like new. I can already tell its put together right this time, which tells me something wasn't quite right before - I'm guessing I didn't get the ribbon cable seated properly before.. there are a lot of tiny, offset contacts on the end of that little cable. Anyway, I guess the moral of the story is screw warranties, and the more times you disassemble your phone the better you get at it.. lol.. it wasn't anywhere near as intimidating this time around. Felt kinda easy, actually. I think I just psyched myself into thinking it would be hard to do the first time around.
I do miss my original glass tho.. I'm thinking about contacting HTC and ordering an oem panel lol.. this one feels.. grippy. The HTC one felt smooth as silk.. I dunno this one kinda feels more like window glass. Meh.. better than a broken ghetto phone. At least now I can whip it out in public without hanging my head in shame and peeking around to see who's looking at my ugly screen. I never even tried HTC directly..I just googled the part and went with the one with good reviews..
OMFG...FML..
Sooo.. I got angry at my Raider today.. started doing the weird touch input glitches again after a battery pull, got frustrated and slammed my phone down on the table in anger...and.... smash. Brand new panel is now ten times as shattered as the old one was. AND...now the phone won't even light up. AND..it looks like I may have cracked the actual LCD this time.. just a small crack at the very bottom - wouldn't even be visible with the shell on the phone.. but.. I'm not very optimistic. I get absolutely nothing on my screen when I boot the phone, all I get is one haptic "bump" and thats it. Nada.
Sooo... looks like I need a new phone. Again.
Lame.
There goes $600.00
....sigh.
Anyone wanna donate an old android device to a guy who's now really really sad and has no phone? LOL.. why did I give away my legend????
Not giving up my phone!! LOL!
Ok so I decided to try my luck at replacing the LCD as well as the busted digitizer that I just re-broke..lol.. back to tmart, and ordered both. I really wish I could have found the whole assembly pre-built, but the only company I found selling both as a single unit had a minimum order of 5 pcs. Out of my price range for repairs, although with my track record maybe it wouldn't have been a bad idea? lol.. anyway, I just bought both parts from tmart and am still waiting for one of them to show up. The good news is I was able to replace the LCD already. It really is just held in there with tape. Like.. there's nothing really holding it all together..you'd think with all those screws and tabs they could have come up with a better way?? Ah well. I have a display again, but until I can get the digitizer and install it I'm without input.. so I can just watch the phone boot and then sit on my lock screen. Or boot into recovery mode and use the vol and power buttons to mess about.. But why..lol. I'll just wait.
I'm just happy that nothing else seems to be affected. I had my alarm going off still with no screen, so that tipped me off that everything else should still be ok. I won't know for 100% certain til I complete the repair, but it looks promising. I picked up a used HTC Magic (ugh) from kijiji for $80 and it came with 3 batteries, 3 chargers, 3 usb cables, 3 leather cases, and a bunch of other crap in threes. Just so I'm not completely without a phone in the meantime. Overall not bad for $80 but man is this phone slow. I installed a custom rom **THANKS XDA!!** on it and it improved the performance and look of the OS a little, but it lags a lot even overclocked when just typing a text.. I can't wait to get my phone back!!
Aside from the screens, this phone is pretty tough. I slammed that sucker down pretty hard that day.. Cmon HTC - why didn't you give us gorilla glass on a $600 LTE phone!?!?!?!? I wish I could find an aftermarket panel that was made from gorilla glass. That would totally rock!
Yeah, i really wish they would've put gorilla glass on it. I used to have the atrix and ive dropped it on tile floor at least 3 times... Nothing. Keys in the same pocket as phone.. No scratches at all.
I didn't want to try my luck, so I just got a replacement vivid

Should I break the tab off the back cover?

I really hate that tab . But if I break it off... will the back cover stay on and I can just easily remove it from now on without the tool/pin/pen/ect.?
Try it? A replacement cover is pretty cheap. Just make sure you order one first.
Report back once done.
The whole purpose of asking was to try it without requiring a new back cover
smile_ppl said:
I really hate that tab . But if I break it off... will the back cover stay on and I can just easily remove it from now on without the tool/pin/pen/ect.?
Click to expand...
Click to collapse
So then break it off. If it works then great if not then get a new one.
Sent from my DROID4 using xda premium
smile_ppl said:
The whole purpose of asking was to try it without requiring a new back cover
Click to expand...
Click to collapse
If that were the case, nobody would ever get anything done. Stop being a part of the ME generation and be a pioneer!
640k said:
If that were the case, nobody would ever get anything done. Stop being a part of the ME generation and be a pioneer!
Click to expand...
Click to collapse
You know how to recognize a pioneer, right? They're the ones laying face-down on the prairie with arrows in their backs.
works fine
I just pioneered it.
it works fine and seems tight enough. You drop your phone and it's going to go flying though
kahnvex said:
I just pioneered it.
it works fine and seems tight enough. You drop your phone and it's going to go flying though
Click to expand...
Click to collapse
Same here. I just got a D4 yesterday. Tried to get the back off to insert my memory card, failed with a pen and with a paper clip (no key, or whatever they call it, was included), took it to Verizon where they opened it up. They seemed surprised that that was all I wanted, haha. Didn't actually buy anything. Just walked out with the back cover and phone in separate hands. Inserted the card when I got home, searched to see if anyone had ever just broken that damned thing off, found this thread, did it myself...success! The back cover now works just like any normal one. It's as secure as the cover of my LG Revolution, or more, and no more hassle or ridiculous key to keep track of. And actually, I think because of the way the little hooks slide in, it's less likely to go flying off when dropped than the Revo's is.
You don't need a key anything to poke in the hole. Just finger nails to push along the top seam. Cover comes off quite easily.
Have you tried just pressing with all your fingers on the center of the cover and sliding down? I was at verizon today and thats what the lady who helped me did. Works just fine. I dont think ill ever stick anything in the hole again.
Sent from my DROID4 using xda app-developers app
I wonder if the precision with which the back is made isn't great so that different phones vary in the ease of opening. For me it didn't matter where I applied pressure, it just wouldn't open. And believe me, I tried it everywhere, and held in one hand, two hands, laying flat on a table, etc. But yeah, at least on mine it doesn't seem to need the tab at all. The back is still very secure without it.

Categories

Resources