Database Develop

Call transferring

Don't know if this is Kaiser only, but since I'ts a kaiser thats giving me grief here goes...
We're using a mobile switchboard and as part of the group answering our main phonenumber I'd really like to be able to transfer calls with my Kaiser...
Normal phones (as in my last Nokia E61i as well as my N95) gives me the options to park the current call, dial my colleague and then "transfer".. I can't find this option on my Kaiser..
Is this option not available in WM6 or is it HTC that has "removed" it? Or perhaps, is there a thirdparty software to help me with it

Go to Start / Settings / Phone / Services / Call Forwarding.

I'm talking about call transferring not call forwarding..
Transfer = I answer the call, call another contact & transfer it to him..
Forward = all my calls go to another contact and/or number...

Can I push this up, cause I'm desperatly looking for this function on the kaiser.
Maybe there's some addon or a special key combination to activate call transfer on the htc kaiser?

yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.

firstbuddha said:
yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.
Click to expand...
Click to collapse
Thanks for the answer! I will try this when I'm back in my company.
The costs are no problem because we call each other in the company for free and the call transfer is only needed to redirect customers to the right contact but I think it's a long way round when there could be a simple option in the menu (like hold and conference). Every other mobile I know offers a direct way to do this (either a menu item called transfer or by pressing a number).

firstbuddha said:
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Click to expand...
Click to collapse
Tested it and it doesn't work. It simply quits the complete conference.
Again, maybe there's a special dialer which supports it or some kex combination to press.
I really need this feature!

Solved!
So here's the way it works on wm devices:
Get the first call and put it on hold.
Make the second call and press the number 4 followed by the green phone button.
The second call is now transferred to the first and you are finished.
Great thanks to my phone provider ONE who came up with it!

Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
I did read that if your call comes in using a Google Grand Central number you can transfer it using Grand Central specific codes.
Later, Lew

lewcamino said:
Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
Click to expand...
Click to collapse
Yes, it's a "feature" that your Phone Provider must support in order to use it.

I get "cannot conference calls".
I know for a fact that the same sim when used in my old v v old ericsson r380 world phone allows me to conference multiple people.
but my kaiser (running stock) says the above message.
how can i conference calls? the phone looses part of its utility value if I am unable to use this feature. someone got any tips/ tricks for me?
p.s. i initiate both the calls...

conference call is not the same as call transfer!
You can start a conference as described by firstbuddha a few posts ago in this thread (you just shouldn't hang up if you want to stay in the conference). There's also a menu item for conference call.
If you use my method with pressing 4 and the green phone button you are trying to transfer a call which is only possible when your phone provider allows it.

Problems with SMS and "accept call" button

Hi,
I have too problems now.
1. When I receive a call, if I push the "tactil answer" button, I haven't the communication; il works like if I had rejected the incoming call (so I have regularly to call back !!! Not really economic...)
Actually, I used the hard butoon to accept the incoming call, and it works.
But do you have any solution ?
2. When I missed a call, I received a SMS what infoms me that I have a new message. OK, but the expeditor of the SMS is each time my boss !!! (the latest contact of my list). Can you explain that, and what I have to do ?
My ROM is 1.37.406.1 FRE, and I use SFR.

Nobody have a idea ?? Help me please...

I have this problem once but after flashing my device to another ROM, this problem seems to have disappeared. So, I can't really say I help you but this is what I did to make the problem go away.

Ok thank you for this answer...
I see the new ROM 1.93.XXX... is now available in French, so I think I will go on in a few days !

# Rings Incoming Calls

Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211

If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.

I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps

thanks nisse thats very helpfull.
by the way forward to is call forwarding.

Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!

NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!

3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep

I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark

http://forum.xda-developers.com/showthread.php?p=2793104#post2793104

its a setting by your phone provider

yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure

sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.

SJPhone when ringing

Hello,
I have installed SJphone to use voip on my diamond. However everything works but how do I answer a call when it starts ringing? It seems unclear how to do that as I do not get any button to answer?

nobody!!
nobody uses SJPhone in their HTC diamond?
How to answer a call? So far I couldn't figure it out, therefore I put auto answer option on to be able to pick up the call!!!!

nobody
anybody?
How do I answer the call in sjphone please???

hi.
i encountered the same problem as you did.
the problem is because that SJPHONE you installed is for wm2003.
the bottom of the dialogue of an incoming call which showing the "answer" and "reject"
button won't display correctly on wm6.1.
just download the wm5 version SJPHONE from this link and install it, problem solved.
http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/

thx
thx alot, finally i can see the accept menu thanks to you

No sound on incoming/outgoing calls

Hi all,
I have a problem with my new Diamond, that I hope someone can help me with.
Sometimes when I make a call or when I recieve a call, there is no sound in the "internal" speaker. Only if I press the button to enable the "external" speaker, I can here what the person says that I'm calling.
This happens 50-80% of the times that I use the phone. I'm thinking that it might have something to do with that I a use BT headset and a builtin BT system in my car, and the phone can't handle to "change" - or something.
I have the newest Danish ROM on the phone.
Hope somebody got an idea. Thanks.

mnielsen5 said:
Hi all,
I have a problem with my new Diamond, that I hope someone can help me with.
Sometimes when I make a call or when I recieve a call, there is no sound in the "internal" speaker. Only if I press the button to enable the "external" speaker, I can here what the person says that I'm calling.
This happens 50-80% of the times that I use the phone. I'm thinking that it might have something to do with that I a use BT headset and a builtin BT system in my car, and the phone can't handle to "change" - or something.
I have the newest Danish ROM on the phone.
Hope somebody got an idea. Thanks.
Click to expand...
Click to collapse
I`ve the same problem since yesterday, has somebody the same problems??

I have the exact same problem and have not found a fix for this yet
I have checked phone reception and even changed different simcards and carrier.
It still happens and i am using the latest ROM as well.
I downgraded the rom back to factory default.
Same thing happens once in a while.
To me this sound like a hardware related problem and i dont know if HTC will cover this under warranty.

try deleting sms and emails from ur phone and then see

I had this problem after I installed LIVE PVR Call recorder. I uninstalled it and had no more problems.