[Q]Bluetooth - making devices visible always - Touch Diamond, MDA Compact IV General

Ok, i did search over the forum, found some posts on this problem. But no solution, or i couldn't get the solution.
So, the question: everytime i click the bluetooth on at the comm manager, the "Making devices visible" will not checked at other people not able to send files to me. I need to manually go to bluetooth settings to enable it. It looks tedious every time i need to do double job by enable the bluetooth at comm manager and go to bluetooth setting to check "making devices visible".
Any tweak on this?

Ok. Found the solution by myself.
At blurtooth setting, click the timeout tab. Change Turn off visible mode to "never".
Try on bluetooth and check Make device visible again. It should work on your next bluetooth turn on.
Sorry for asking a dumb question.

upm15 said:
Ok. Found the solution by myself.
At blurtooth setting, click the timeout tab. Change Turn off visible mode to "never".
Try on bluetooth and check Make device visible again. It should work on your next bluetooth turn on.
Sorry for asking a dumb question.
Click to expand...
Click to collapse
This works until the next time you soft reset the device. Do you think there is a registry key that makes it permanent?

Nickgr said:
This works until the next time you soft reset the device. Do you think there is a registry key that makes it permanent?
Click to expand...
Click to collapse
I'm fine with Persian Blue, you can find it here:
http://forum.xda-developers.com/showthread.php?t=494333
Ciao, Andrea

Related

S2U2 and Voice Dialer

I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.

vibrate on connect -- vibrate when call connects

Hello again,
My phone vibrates when a call is connected. I know there is a program called pocketAlarm that enables this feature but I never installed it!
What is causing this?
(I like this feature but Im just curious as to how and where this feature was enabled)
Thanks in advance.
Do you have any other contact managers installed? I know inesoft Address Book can be configure to vibrate on connection. I didn't think it was an option in a default build of WM 6.
I do have Inesoft installed but I don't see an option anywhere in the program to enable or disable this feature. Am I missing something?
check this: Settings, Personal tab, sounds & notifications, notifications tab, connection disconnected.
Make sure vibrate at the bottom is not checked. If it is, whenever you dial a phone number the internet disconnect will cause the unit to vibrate. Same thing with connection established.
I checked there and the vibrate mode is not selected, yet it still vibrates when it connects to a call. I am just wondering what software or option is causing it to do this.
The feature is hidden and can only be accessed if you enable Options "Show Tray Icon". Then go to the WM's default Today screen, tap the tray icon and the setting is there under options. I think it is silly to hide it there as people who disable the tray icon will not find this feature.
radium02 said:
I checked there and the vibrate mode is not selected, yet it still vibrates when it connects to a call. I am just wondering what software or option is causing it to do this.
Click to expand...
Click to collapse
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Your connected call shouldn't vibrate anymore - well it worked for me anyway!
Cheers
Zippyioa
zippyioa said:
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
This is not available on my stock AT&T (bloatware removed) 6.1 ROM. There is no "Advanced" tab. I would like to enable this feature. I've tried installing a CAB to do this, but no luck.
[size=-2]Posted with ForumPilot Freeware v1.1[/size]
jpcrailjr said:
This is not available on my stock AT&T (bloatware removed) 6.1 ROM. There is no "Advanced" tab. I would like to enable this feature. I've tried installing a CAB to do this, but no luck.
[size=-2]Posted with ForumPilot Freeware v1.1[/size]
Click to expand...
Click to collapse
same with stock HTC wm6.1
I am currently using this ROM:
http://forum.xda-developers.com/showthread.php?t=435724
Its quick and stable - I can thouroughly recommend it!
I am not sure where you can change the vibrate on call connect setting on a different ROM. Perhaps its worth searching the registry for the word vibrate?
If I find anything I will post to let you know.
Zippyioa
try this solution guys
http://forum.xda-developers.com/showthread.php?t=550553&page=16

How to setup keyboard?

I really don't understand because of all the screen shots I have seen but today I got my diamond and I only have the double keyed keybord ,but I want the full,usally in the screens shots there is a boten that you press and it changes the keybord.But i don't have it,so I went to settings keyboard and tried changing it to full qwerty,but no luck,can anyone help?
There should be a triangular looking icon next to the keyboard icon when you are in texting/email/document/etc mode. You click that icon, then a list pops up for you to select the input method.
I'd like to think that you've looked through the included instruction manual...
Thanks man,a minute after a posted this thread a have read the manual ,so Im embarrassed to say sorry for posting this
same problem...
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
darrelluk said:
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
Click to expand...
Click to collapse
Might not work.. but just a suggestion, try it out if you have the time.
Recalibrate the screen.
Start - Settings - System
Screen
It's a long shot.. but hey.. you never know what might work.
tried that...
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
darrelluk said:
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
Click to expand...
Click to collapse
I have the same problem and there's another thread on this subject. There seems to be a few people now with this but no solution yet. If you look on the other thread, there is a utility called SIPChange which will allow you to make sure you get the "right" keyboard you want as default but in terms of selecting from the little arrow, forget it (until someone can work out which registry entries are causing this).
Gary.
...
Hi Gary,
Thanks for the reply...
I have been trying to figure it out all day...
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
iggy said:
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
Click to expand...
Click to collapse
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Davey101 said:
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Click to expand...
Click to collapse
Thanks Davey101, tried the default 10secs, then 20secs and it did not work, after your advice I switched to 30sec and softReset, then 40sec the same affect.
Then I remembered in my Apache their was always a sipchange shortcut in Startup and when I checked the Diamond their was none, so I created one with the Set parm as my Apache, softreset and I am good to go.

Display during phone calls

Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
u need to install advanced confog tool from Schaps, there is an option to disable device sleep while on call.
CSD connection
The screen also turns itself off when I use a CSD connection for internet access on my device. I assume it's because the phone thinks I'm making a regular phone call, so it turns the display off.
I found that if I load up tomtom in the background, the screen stays on, but after a while, the screen starts to turn itself off for about a second every few seconds, so it has only worked as a temporary solution.
I will give the advanced config tool a try. ty
IDK know about advanced config, but kaiser tweak is a nifty little program to change a lot of settings
Advanced config is just about the same as KaiserTweak.
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
dsoler702 said:
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
Click to expand...
Click to collapse
u should know that Nikagl made some "upgrade" to advanced config tool so it has almost the same tweaks as kaiser tweak.
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
jahrami said:
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
Click to expand...
Click to collapse
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Get it HERE
hotdog53 said:
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Click to expand...
Click to collapse
The advanced config tool should have been the first thing to try. Very helpful app.
Mikulec said:
The advanced config tool should have been the first thing to try. Very helpful app.
Click to expand...
Click to collapse
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
hotdog53 said:
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
Click to expand...
Click to collapse
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
hotdog53 said:
DISREGARD. I found out how.
Thx everyone!
Click to expand...
Click to collapse
ur welcome.
hotdog53 said:
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
Click to expand...
Click to collapse
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
hotdog53 said:
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
Click to expand...
Click to collapse
Here's a screenshot of the phone stay awake tweak.

How to avoid WLAN network connection dialog?

Hi,
I'm having this problem: At home I work with WLAN all the time, so WLAN is enabled. Later, when I take my Xda Diamond as navigation device (with TomTom), whenever I pass a hotspot or private WLAN, a dialog box pops up and a nasty sound plays, telling me that WLAN networks are found and asking to connect. I simply want to avoid that dialog. Is it possible to tell the Diamond to ONLY connect to known WLAN networks (the one at home) and to be quiet if any other network is in range?
Sure, I could simply turn off WLAN whenever I leave home, but often I forget that, and I don't want to fiddle with the settings while driving...
Thanks!
you can turn off the notification when a new network is detected. just look in settings>sounds & notifications.
Dave, exactly what I was looking for! I just missed the point that you can change more than the standard ring tone here... Thanks!
Try This
If your still having problems, try this.
Here is a program i made that fixes this problem for the HTC touch pro, let me know if it works on your device.
On my device at least, after I disable the notifications they come back automatically every time I soft reset. This will fix that issue
http://forum.xda-developers.com/showthread.php?p=2950391#post2950391
chetstriker said:
If your still having problems, try this.
Here is a program i made that fixes this problem for the HTC touch pro, let me know if it works on your device.
On my device at least, after I disable the notifications they come back automatically every time I soft reset. This will fix that issue
http://forum.xda-developers.com/showthread.php?p=2950391#post2950391
Click to expand...
Click to collapse
You were right, after soft reset the notifications came back. Actually I solved that by setting a registry key in a MortScript:
RegWriteDWord( "HKCU", "ControlPanel\Notifications\{DDBD3B44-80B0-4b24-9DC4-839FEA6E559E}", "Options", 0 )
I guess your *.exe does the same?
eludor said:
You were right, after soft reset the notifications came back. Actually I solved that by setting a registry key in a MortScript:
RegWriteDWord( "HKCU", "ControlPanel\Notifications\{DDBD3B44-80B0-4b24-9DC4-839FEA6E559E}", "Options", 0 )
Click to expand...
Click to collapse
Interesting... how do you launch the script? Do you put a shortcut to it in the startup folder?
Davey101 said:
Interesting... how do you launch the script? Do you put a shortcut to it in the startup folder?
Click to expand...
Click to collapse
Exactly. After installing MortScript, it's enough to put a shortcut to my init.mscr script into the \windows\AutoStart folder.
Yep, that's all my program is doing.

Categories

Resources