Locked GPS - Touch Diamond, MDA Compact IV General

Hi I have a T-Mobile Compact IV (HTC Diamond I believe) and my GPS has just stopped working. It comes with CoPilot LIve 7 Trial and has been working fine until I bought the licence code for the full version.
Now it says there is 'No GPS Signal' when I run CoPilot. I have tried QuickGPS and Google Maps (both pre installed like CoPilot) and neither of thoses apps work either!
I have read that the GPS chicp could be locked? Anybody came accross this problem before or have a solution to this. I have emailed T-Mobile, HTC and the makers of CoPilot. Seems like nobody is interested in helping now that I have shelled out for a licence code.
Any help here would be greatly appreciated.
Thanks in advance.

GPS chip cannot be "locked" out...forget that
There are a number of great threads relating to GPS issues exactly as you described (too numerous to list though...) suggest you have a quick search and move on from there...
I expect that you need to clear the embedded data (use HTC GPS Tool, and clear memory) and then be patient for a first fix.......confident this will work for you

i'd also recomend GPS Tool, its availible here.
Just download the .cab file and run it on your MDACIV

Thanks for the reply guys. I have downloaded and tried the HTC GPS tool and it doesn't seem to find anything. All I get is the error 'Failed to send NMEA command'.
I have just downloaded Google Maps and tested that with the GPS setting and it just sits there saying 'Seeking GPS Satelites (0)...' for ages.
I have also tried lots of the other suggestions in this forum but with no luck. Its almost as if there is no GPS built into this. The only things I have hope for is to hard reset the MDA or to update the ROM/Radio. Tried using the reg edit tool and adv config tool to see if any settings are causing a problem? Could it be the update to comapct farmework 3.5 or the settings for the IP phone?
Unfortunatly I have followed the instructions to hard reset the MDA but it just seems to soft reset, plus what will happen to my installation of CoPilot as it was pre-installed with the phone. I have a backup done with the Sprite Backup tool that came with the phone but will this restore programs if the device is reset?
And the ROMs are all for the HTC Diamond. Plus not too sure about invalidating my warranty with an update.
Really starting to think the GPS has just broke on me. Which is a bit odd since it hasn't been dropped or damaged etc...
Starting to get a bit frustrated as there doesn't seem to be a conclusive answer any where on the web and no supplier is getting back to me (wonder why...?)

OK...it lookslike you have a few more options now....
First thing is make a backup! Do this now and save it to Internal Storage.
A Hard reset appears to be the next option...its fiddely to organise, but it sounds like you need to get a "fresh" install. I would then only install the HTC GPS Tool and then try and find your GPS using standard setting as installed. If it cannot be found then perhaps you have an issue with the unit itself.
As for your co-pilot, surely you have the install cab or disc that came with the unit?
Right now you need to know:
i) Are just the settings screwed up, or
ii) Do I have a faulty unit.....
If it faulty you want to keep the original ROM for warranty purpose (so don't flash that........yet!)

Hold on...
GPS is always OFF until the phone comes out of 'flight mode'. You can do this by activating at least one of the following (phone, BT, Wifi).
Some applications like Igo8 are able to access the GPS whilst the phone is in flight mode.
Other apps such as TT, GPS Tuner, BeelineGPS etc need the non-flight mode.
This can be set in the Comms Manager.

topspeclt said:
Hold on...
GPS is always OFF until the phone comes out of 'flight mode'. You can do this by activating at least one of the following (phone, BT, Wifi).
Other apps such as TT, GPS Tuner, BeelineGPS etc need the non-flight mode.
.
Click to expand...
Click to collapse
Not as far I am aware. I can and have run TT6 with flight mode engaged - on a BA flight. It starts by saying flight mode engaged at the bottom left, but still finds the satelites (as long as you are next to the window).
And yes BA allow the use of GPS for flights except at take off and landing.

Thanks everyone for the replies.
But I took the plunge and dislocated my fingers to perform a hard reset. After the hard reset the phone automatically re-installed all the supplied apps (CoPilot, Google Maps etc...) and it worked fine.
Tried lots of suggestions and tools but this is the only thiong that has worked. I have read lots of conflicting posts about how the GPS can lock due to several apps attempting to use it while other say its due to the phone not having it enabled as default. And then others say it can't lock!
At the end of the day the GPS worked in the morning and then stopped in the afternoon after no fiddling with the phone. This makes me feel like it could happen again.
As I write this I have just had my first manufacturer response. Its from the makers of CoPilot. They have posted the following :
Please go to Start Menu | Settings | System / GPS
• At the bottom left hand corner of the screen please select Programs and change the GPS program port to COM 4.
• Select Hardware at the bottom left hand corner of the screen and make sure the GPS hardware port to be set to COM 3 and the Baud Rate to 4800.
• Finally at the bottom left hand corner of the screen Select Access and check if the box Manage GPS automatically is ticked.
• Also, please go into START | SETTINGS | CONNECTIONS | BEAM
Please ensure that the beam is unticked as this affects the GPS pickup.
• Also ensure that you do not have any other GPS program installed on the device as this could also affect the GPS setup in Copilot.
2. Launch CoPilot Live on your Pocket PC (Tap on ""Start --> CoPilot Live"")
a. In the ""GPS"" menu, tap ""Options"" and tap on ""Setup GPS""
b. Tap on ""Manual"" and in the ""GPS Com Port and Baud Rate"" section, select the COM port and Baud Rate as provided by your GPS manufacturer (Com 4, Baud Rate: 9600). If you do not know this information, tap the ""Automatic"", then tap ""Next"" and CoPilot Live will search all available ports for your receiver. Note: If you are using a Bluetooth GPS receiver, your Pocket PC's Bluetooth Manager must be aware of the device before CoPilot Live can detect it.
c. Tap ""OK"" at the top of the screen to close the GPS Options. Note: CoPilot will remember the GPS settings on exit, so you will only need to configure your GPS on the first use.
Would like to have tried this but I spent quite a bit of time messing with COM port setting et all... and nothing seemed to work. Ho hum.
Anyhoo, again thanks everybody from your help.
Andrew

Related

Google Maps help

Google Maps is timing out and not displaying any imagery. It gives the following error “You must install a new version to use this program” I have version 1.2.0.18 installed which I think is the latest version of the tool. I tried installing via direct download through my device and *.cab file, both methods yielded the same results.
I started to think might be due to my network connection using MediaNet. I’m not sure if I should use “AT&T ISP” connection instead (I don’t know those settings are).
New AT&T Tilt user, device is just few days old
It, 1.2.0.13 works fine on my vario III. I can tell which room of my house I am in. Have you tried using it over wifi, this would show if it is your network settings that are out of whack.
wizzzard said:
It, 1.2.0.13 works fine on my vario III. I can tell which room of my house I am in. Have you tried using it over wifi, this would show if it is your network settings that are out of whack.
Click to expand...
Click to collapse
Can you provide the Cab file for that version?
I can get it to initialize GPS but it doesn't get sattelites. (v1.2.0.18)
if you are trying to get GPS to work you either not to use a nother app to start the GPS or go into th settings and change it to look through com4 and baud rate of 4800
also the proper cab file should say compressed in the title
thats some weird stuff, never had a problem with gmaps on my tilt...try doing a hard reset and reinstalling and let us know how it goes (hard reset = (while the phone is on) press both soft keys simultaneously and take your stylus and insert it into the reset hole in the bottom, right above the miniusb connection)
Got it working....
Did a hard reset, stopped AT&T's customizations.
Now everything works. I have Visual GPS mapped to PTT & GoogleMaps mapped to PTT (Press & Hold).
I know it ain't the best for GPS but it's free and will do until I decide on which software to buy.
Like I said you don't have to start VisualGPS to get the GPS started with Google maps as long as you go into the settings and change it from Automatic to manual and then change the com port and buad rate My works great and is 1000 times faster than Windows Live maps which i think sucks personally
Same but different problem....
So google maps works, track location works well for about 5 minutes and stops. It says it's still seeing the birds but the flashing blue dot just wont move. Sure I turn "track location" off and then back on, it then works for another 5 minutes....
So do we think it's a H/W or a S/W issue?

Still can't GPS to work... can anyone help?

I've just got the Vario III new from T-Mobile UK, and I just can't the GPS get to receive any signals. I guess there is no "in box" way of testing the GPS, so I downloaded MS Live Search, and in there the "Centre on GPS". Previously, I set the hardware to COM0, 4800 Baud, autostart GPS by appilcation. In Live Search, I equally set it to COM0.
When is press the "centra on GPS", the righ hand side orange LED starts blinking, and the message inside Live Search is something like "retrieving GPS datat", but that's it. Nothing more happens.
I've also tried it with TomTom, but no result here either, other than the message "invalid GPS data".
I've called T-Mobile support to find out if there's anything on their side that needs doing, but apparently not.
So, I'm pretty stuck. Does anyone have an idea what I could try? Thanks!
First off, never ever go into the External GPS settings in the control panel. The general consensus around here is that it almost always requires a hard reset after messing with that. If you did, make sure it's set to COM4, 4800 baud.
Make sure your apps are set to COM4, 4800 baud. If that fails, a hard reset may be in order.
Why did you set it to COM0? Did someone tell you to do that?
I set it to to COM0 just to try SOMETHING.
I guess a hard reset is in order
So I just leave the GPS settings be and don't even touch them, yes?
Ok, so I've just done a hard reset.
The one and only thing I've done is install Live Search.
In the prefs of it, COM4 was automatically selected.
Hit "centre on GPS", with absolutely no reaction other than "Getting GPS position".
Any further thoughts? Hardware fault? Software issue?
The signal from GPS satellites is very low powered. ANY obstructions to the sky can cause a failure. My handheld Garmin GPSs and my Tilt will not get a lock in the house. Outside; buildings, trees, land masses and clouds all prevent a good lock. From my experiences with the Tilt, I have to get out into the open and wait 5-10 minutes or more for a lock.
Download the new google mobile maps and try that. It seems to get a fix quickly and doesnt time out as quickly as the older version (and some other gps enabled apps).
Cool, I got it to work. I left the device outside on the balcony for 10 minutes, and Live Search did lock in on me.
I now downloaded Google Mobile Maps, but couldn't locate a GPS function (I downloaded it from their website). Am I blind?
The thing that worked for me was to install GPS Viewer (freeware, you can Google it) and then open GPS from there. It takes about a minute to connect but then it stays on and interfaces with Tomtom very well. Prior to running it, please also download and run QuickGPS (it comes as loaded software with Kaiser, you may have to download it also as freeware, helps keep the connection steady; it is advised to download QuickGPS once a week, this is as long as its effect lasts, don't know why). The combination of QuickGPS and GPSViewer works very well.
naujoks said:
I now downloaded Google Mobile Maps, but couldn't locate a GPS function (I downloaded it from their website). Am I blind?
Click to expand...
Click to collapse
Menu | Track Location
Hmm no, I dont have that menu item. Maybe I got an older version of it after all?
It's "Menu | Show My Location" on mine.
BTW, I saw a trick on another thread which worked very well for me. Enable the GPS Photo option (by using Kaiser Tweak or tweaking the registry) and open that first. It seems to get a fix very quickly. Once it's got one, you can close it and open any other GPS program like google maps and it tracks instantly. I also have QuickGPS installed and updated so that probably helps too.
After hard resetting twice, I have never run the QuickGPS program and I get a fix every time in less than a minute, even inside my house (by a window).
One program I highly recommend never using until it is updated is Map4PDA. It killed my GPS, requiring a hard reset.
Download GPS Test, run and confirm signal strength by satellite. That should solve your issue or at least answer the question of functionality.

GPS Not functioning

I screwed my Kaiser gps by trying to use map4pda which automatically changed the port in settings for gps. What can I do? Gps not working anymore,even after putting back the old settings and doing softresets,even took out the battery for a while
Not a single program can find my inbuilt gps now
I do not want to do a hard reset,I have tooo many progs and no backup
Please help
I am afraid to use any other gps program(even after a hard reset) because this could ruin my gps settings
I read somewhere that gps applet is misconfigured(from factory)..and even a slight modification to it,could lead to my gps not functioning till a hard-reset.
Also it's not normal that a program can modify the gps'settings by itself
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Lidberg said:
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Click to expand...
Click to collapse
Thank you for the info..
Are you sure this is the only gps program that messes up the gps?
Did you test Igo,GpsTuner,GpsGate,Pathaway professional,GeoScout??
But Gloposis,BeeLine gps??
Any other incompatibilities?
Thx
I haven't tested all of those. Here's what I have on my phone right now:
FFF (finger friendly friends)
Google Maps
Live Search
GPS test
GPS Utilities
GPS viewer
GPSinfo
Navigator II
TomTom 6
TrackMe
Virtual Earth
VisualGPSce
I think the other ones will be safe. Map4PDA is the only one I've heard of that kills the Kaiser GPS.
A hard reset is your only option and shouldnt be a nightmare.
Work out what apps you want, check you have the cabs etc, sync your device with your pc and away you go.
I keep all my favourite apps cabs on my storage card so that I could hard reset even if away from my laptop (but I do have an exchange server so setting up sync remotely is also easy).
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
emariu said:
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
Click to expand...
Click to collapse
I too noticed that using different GPS software tends to screw up something on my Tilt. I've used Google Maps and MS Live Search and these tend to screw things up to the point that the GPS is useless. I also have Copilot Live 7 installed and this program has the ability to reset the GPS on my device.
For those not familiar with Copilot, when you go to the Settings panel in Copilot and choose Reset GPS, it asks you to enter a city within 100 miles of your current location in order to reset your GPS properly. If someone could develop an app to replicate this... This would be a great standalone app for all Tilt & variant owners.
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
what about a backup? make a backup before you install an app that you don't know if it works or not, install/run app, if all is good, no worries. if all is bad, restore from backup.
the Tilt ROM comes with sprite backup and htc backup is flating around this forum...
emariu said:
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
Click to expand...
Click to collapse
Not sure how this works, but I've been able to get my GPS working again every time with this feature.
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
In the external GPS settings programs tab set to 4800, in the hardware tab gps hardware port select none, baud rate should be at 4800. In te access tab tick manage gps automatically.
Load the TomTom app that comes with the Kaiser or download it from here. go to config on the gps settings within TomTom and it will right itself
Make a backup of the registry and put is back in this situations, easy and fast when you try different programs.
Btw Igo works fine also Nusa maps (Indonesia), Map King pro and Papa Go..
unwired4 said:
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
Click to expand...
Click to collapse
That's not true in every circumstance. Like the OP, I installed Map4PDA. When you run the program, it searches for the GPS (you can't specify what COM port to use manually) and in my case, hangs on COM3 for whatever reason. I let it sit for over an hour and ended up doing a soft reset because the program was unresponsive.
After that, my GPS would not work in ANY program that it worked in previously. I checked and double-checked my settings to no avail. I posted here and on MoDaCo and got some good advice but in the end, only a hard reset fixed it. Yes, the GPS light would blink but my Tilt would run very, very slowly and would never get a fix. That QuickGPS program would error out every time I ran it. I don't know what Map4PDA did, but it hosed my GPS and it looks like the OP got bit too.
Since my last hard reset, I have installed tons of GPS enabled programs and they all work just fine. I also have never run QuickGPS and I can get a fix within 10 seconds in any program.
I know it's not logical, but that is what worked for me.
EDIT: I don't advocate the spreading of paid for s/w, but I would be curious to see if your CoPilot program would successfully reset the OP's GPS.
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
emariu said:
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
Click to expand...
Click to collapse
COM4, 4800 baud
this com 4 is a program port,it's not the harware gps (native) port..
can we find out which port number is the default(hardware)?
But thnks anyway for the answers
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Lidberg said:
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Click to expand...
Click to collapse
I use GpsGate anyway,so using multiple gps programs at once isn't a problem for me,BUT because I cannot use hardware port, we are stucked with 4800 baudrate,which is a limitation only with soft multiplexer(built in the OS)

Help with GPS

I tried everything and i am jst giving up. what can i do to make this friggin gps work? I followed everything meticulously on ppcgeeks http://forum.ppcgeeks.com/showthread.php?t=36639 without any luck. google maps keeps search for satelites, and nothing. always number is zero. do you have any idea what could be wrong? i am on telus cdma network btw.
hi friend...
1st in which area of this sad world do you live??
2nd what is your mobile operator??
3rd do you have a costant/flat umts/gprs connection trought your mobile??
bye,
davide
i live in toronto. i had blackberry curve before this and the gps was smooooth.
this one is being alil biatch.
i am with telus
the third question i don't understand, but my blackberry curve was also with telus, for a week before diamond arrived and the gps was excellent. i don't know why diamond gps is so screwed up. as i said, my diamond is the cdma version. any help is much appriciated, thank you.
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Hi bro!its me again!
suiller said:
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Click to expand...
Click to collapse
This has always worked for me as well......and I have to do this often as I'm always flashing Radios to try and find the "Optimum" one
suiller said:
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Click to expand...
Click to collapse
yup!work for me too!
hey ninja, lol. how's it going
suiller thanks for the help. i am going to give that a try. i hard reset my rom. i am on juicy 2.5. but it didn't change much. do you think if your first option does not help. i should flash another rom, maybe stock rom, and then put the one i want?
it depends... like mentioned above if your GPS works it just a gps cache problem, in fact soon as cooked the gps cache is empty or corrupted, so it must be reinitialized, doing so the 1st time takes long time
instead if your gps isn't detected, you can check in a minute also by lanuching gps tool, it is yet configured to look at com4 (default com port for gps in htc brand, the problem is somewhere else, I mean that probably the problem could be also in the rom you are using, if the 1st procedure does not work, try to restore your original rom, before carrying back your mobile for warranty be sure it isn't "self-mistake" (for ex by installing an "unofficial" rom)
for what I can say I cooked almost everything & just happened one time, many months ago in my opinion 99,9% of cooked roms doesn't touch gps at all, so I sincerely didn't remember what's happened that time
bye,
davide
hi. thanks for all the help guys.
i tried the gps tool. i installled it and selected clear memory, open, and it never stopped going through the numbers. same numbers again and again, but when i clicked setting it said mode 2 not fixed.
if i recall properly, the gps message i got from google maps was gps not found, but i am not sure ithat it's the rom's fault. it's very popular on ppc geeks. i tried qualcom method to solve the problem but it did nothing. mdata, info, is saved on my hone but no change. so i will try disabling agps, if no help i hard eefresh, or put another rom, if all faili go to fet it replaced, again.
thanks for all you support
ok, i reflashed to stock rom, tried the gps tool, it keeps showing the same method and won't stop. do i need to wait for it to stop?, cuz when i go to information it says mode 2 not fixed.
i am going to hard refresh, and put juicy 2.5 back on, and wait for your help. if nothing i will take it to the store.
I hope you don't have A-GPS cofigured...this will surely screw up your GPS
in tweak diamond, agps is enabled. when i disable it and go to quick gps, it gives me an error, when its enabled quick gps downloads.
should i disable a-gps in tweak diamond?
sure friend, AGPS should be disabled if your provider isn't able to "provide" you that service, beucase it takes busy over & over your gps chipset
there 3 modes to update gps sats positioning:
1) quickgps, simply it's a database where are stored circles/ellipses made by sats, because they are always the same, that data are predicted, so for this reason those values are good also for the near future (at max 1 week), this is the "old" method used by years to make fixing times faster, even if resulting position isn't very accurate
2) AGPS, this should be the last & most intelligent feature, of course your provider must be able to provide that data, if your provider can do this it simply compares your current position (cell broadcast) with the ones stored in their database, and provides automatically to your mobile (trought a regular gprs or umts service) updates positioning, if your provider isn't able to provide this service your gps chipset will be always busy because it scans the network continuosly and other software like for ex tomtom wont be able to access the gps chipset anymore because like told above it is busy by another application
3) classical method, I call old school, and this is also the more realistic method, even if 1st time can take very long and if you don't use very much your navi software it is very annoying because sats runs fast simply it needs a program like gps tool or gps test to full the gps cache (1st time is totally empty), where will be stored current sats position (circles/ellipses), this method can also be reached with last modern navi software, like for ex tomtom7, you must leave it runs until it finds something, remember that 1st time can take up to 20 minutes... it depends also by region & sky conditions, in general in a good environment (ex openspace) for me & in my experience it never took over 5/10 minutes
so if your provider doesn't provide AGPS service simply turn it off and re-run the 3rd method in an open space and you'll see that something will happen
anyway if trought gps tool you are able to open the com4 port and you see data flows it means that your gps chipset is recognized, you have just to wait, if you want a faster/simpler app search here around for "gps test"... simply run it, it detects automatically your gps com port & starts to discover sats
hoping to have cleared something about gps system
bye,
davide
ok, i reflashed stock telus rom, then i flashed juicy 2.5, hard reset and here i am. i got diamond tweak, disabled a-gps:
with a-gps disabled, quickpgs does not update any more. gives me an error at the end.
so i am going to do clear memory with gps tool, but does baudrate matter? when i turn it on it is set at 5600 should i change it to 4800?
do i need to be in an open area when clearing memory, or it does not matter?
if this wont work, i will go in throug hqualcom, and make sure i have the settings posted on ppc geeks forum. i hope something will turn up.
what is the connection though. if a-gps is disabled, quick gps does not download. but when its enabled it does. does it mean telus supports a-gps or it shows that there is an internal problem with my gps?
thanks for all the help.
i installed gps test. it shows yellow circle and GPS starting up. above it shows hdop 50.00 Fix 1D, and baudrate is set at 9600.
does this also take a long time, or is it a good sign. if it shows this, does it mean my gps is working, but only needs to be reconfigured somewhow?
i was just outside for 1 hour, with the gps tool turned on. nothing. it keeps clearing memory, or so it says, but when i look the same numbers show up. i waited for an hour till it got dark and cold and went back. gps test shows starting up gps but never getsa round to it either.
i duno what to do anymore.
ah, where is everyone?
holy crap, finally, i solved it.
I had the same problem after setting AGPS in Advanced Configuration Tool. Nothing I did: soft reset, hard reset even installing new ROM resolved the issue. Finally I found the problem: Go to Programs-settings-phone-services-Location setting-get settings-On. This allows your phone to tell your GPS where you are. The GPS now finds satellites in a few seconds.
Click to expand...
Click to collapse
it was an old habit of disabling gps to emergency only. i didn't realize it would screw me over on a pda. well. nice nice nice.
thanks for all your help everyone, you ahve been great.
this means that your mobile provider supports AGPS feature
so it must turned on... well done

TomTom Satellites

After some messing about with TomTom themselves (due to issues they had on their site) I have now finally installed the maps onto my Serra. Map is fine, but when it comes to getting a good GPS signal it hasn't had one yet!!
I can see various satellites all around me (on the screen, not in the air) but it just keeps asking if I am in a building as quality is poor.
I am in the UK. I did actually get some other navigation software with the phone itself when I bought it secondhand but that is still all in its cellophane as I like TomTom personally. Have paid for the cameras/traffic updates too and camera work but traffic seems to have put me onto a trial rather than full version. Will take that one up with TomTom themselves.
Well, assuming that you are outside, then I'd suggest checking that AGPS is switched OFF, as I've seen this do weird things to TomTom. The other thing to try is to force QuickGPS to download updated data, as that sometimes has a beneficial effect.
Cheers,
Steve.
No fix
A Friend of mine had the same problem with his Asus A636. I used a program called SirfTech (http://w5.nuinternet.com/s660100031/SirfTech.htm) to reset the GPS chip (not entire phone!) to factory standard, it worked perfect for him.
Start sirftech and press "OK", navigate to "NMEA" then "navigation initialization", select "factory reset" and press "set". that should be all, close sirftech (maybe soft reset) and try again.
good luck
Try this http://www.htc.com/www/SupportViewNews.aspx?dl_id=570&news_id=165
try adjusting your baud rate until you find one tomtom likes, i noticed mine taking awhile to lock up also even in the car, If i need my gps to jumpstart here is my trick.
I open GCzII I pick any cache and i hit gps monitor, dont ask me why but if you have 8 satellites greyed out (not locked) this works everytime. It seems to initialize it quicker. Why ? i have no clue but it works for me.
If you are using a internal GPS then select the option "other NMEA reciever" and select the right compoort..

Categories

Resources