help! my diamond wont find my pc or headphones. - Touch Diamond, MDA Compact IV General

Having an issue with my diamond. It wont find my headphones when i connect them, it also wont find my PC. No activesync, no nothing
The strange part is it will charge as normal... so if its usb related or software related i have no idea.
Any help is appreciated

there is a known problem with other HTC models that is not really a fault with the phone, but with the operation.
i had a Artemis, which had the same problems as you are describing. After a lot of research, it turned out to be that when i charged the phone in the car, a power spike was causing the USB board in the phone to be damaged. this usually occures when starting the car.
It can be fixed under warrenty.
since then i always start the car first then plug my phone in
Hope this helps.

thats strange...never connected it in a car before... ahwell... just have to send it in then...damn it..

I know it souns silly, try blowing hard into the port, I sometimes pick up a lot of dust etc from jeans pockets this can cause obstuction to headphones etc

hmmm btw... i have a cooked rom on it... any idea if this will affect my warranty?

ekksman said:
I know it souns silly, try blowing hard into the port, I sometimes pick up a lot of dust etc from jeans pockets this can cause obstuction to headphones etc
Click to expand...
Click to collapse
tried with compressed air... no dice but thanx for the suggestion

a little update....
hmmm seems to be fixed now happy happy

Related

Phone Stuck in (headphone) mode, cannot make call, please help

Hi, often i keep headphones in my xperia x1
This way i will hear through the headphones, and talk into the phone as it is in speaker phone mode.
The other day i noticed when i took the headphone out i could no longer use the phone.
I was forced to use headphones plugged in when using the phone.
TODAY, the mic does not seem to work. I can hear people on the line through the headphones, but they cannot hear me.
I reinstalled roms, and hard reset with no solution.
What is going on here? how could litteraly everything have failed on the phone immediatly?
The only time it makes ANY noise, is when the phone finishes starting up after windows loads. with a little (ta da, ta da)
thats it
i cannot make it make any other sound.
also the (speaker phone) option on the phone is now faided out.
and it is not possible to click on it.
The phone (RINGS) if you call it
It makes the noise as the end of the start up.
I cannot get it to make ANY sound myself, It just seems stuck in headphone mode
Take your stylus and wiggle it around in the headphone jack, that can fix it. It's happened to mine a couple times.
Yip, as above. Or continually put in and take out your headphones in a forceful manner - that's how I fix mine when it occasionally happens.
Send it back!! I had this happen, 2 weeks later they sent a new one as it could not be fixed.
Same. take it back
The environment
i had the same problem befor in my x1 and i did do the stylus way and it did worked at the beggining but after awhile the stylus way coulddent help anymore and the phone was no longer working without headset so i toke it to my axiom phone agent and they coulddent fix it so all they did its they change the motherboard of my x1 but after awhile the same problem came back but i try to go after the reson for it to keep happening and i came to know that the main reson for this problem its the wather! changing wather or environment its the reson for it to keep happening for i.g let as say u are in a cold room now and then u had to outside and the wather was hot or humid weather some little water brops will be created inside ur 3.5mm jack because of the humid that will keep the little metal parts attached to each other even if u already remove the headset that will give a sine to your phone that says the headset still inside the phone even if you already remove it,and the only way to fix it try to blow dry air throu your 3.5mm jack and make it dry inside ,but dont keep doing the stylus way because it would damage the jack metal parts and may cause a hardware failer
my advice its try not to keep the phone very cold or in a cold place for a long time and if u ever had to go outside and it was humid weather try not to keep ur phone in your hands first when u are out keep it in your poket for a while let it wram up a little and then use it

Dropped phone, memory access?

Hello everyone, I've searched all over for an answer to this one with no joy.
I've had my stock Orange locked Diamond for almost two years now, and towards the end of a family break I dropped it.
Now it won't switch on beyond an initial buzz, and none of the mini USB chargers or pc cables will persuade it to charge.
The problem is that I used it to take all the photos during the family break, and now can't access them.
Now I read the reply about "jump" charging the battery and will be giving that a go, but can the memory chip be accessed independantly to offload the contents?
I should add that for quite a while before, the phone picked up and dropped the usb connection when connected with a frequency of about 3 - 5 seconds, which was very annoying.
Many thanks in advance
Luke
Little update
Hello all, thank you for reading about my plight.
Well I managed to charge the battery, and I think the phone switches on, as the volume controls make the appropriate sounds. However the screen is black, and even under heavy sun I can't see anything, so it's not just the backlighting that's gone.
The pc doesn't notice it when I connect, so I can't get in that way, unless someone can point me to how to chop up a cable and hardwire a data connection "upstream" of the mini-USB socket? (I'm hoping it's just the connector which is dead)
Otherwise, is there a combination of hardware buttons that will switch on bluetooth? I dropped it when it was in airplane mode. I had BT explorer checked, so if I can get BT on, I should be able to browse the phone with the pc? Please confirm.
Looking forward to reading your suggestions
Cheers
Luke
ps now I've discovered the limitations of a fixed memory; if the card were removable, all this wouldn't be an issue.
Your solution
http://forum.xda-developers.com/showthread.php?t=657514
Thanks, I'll give it a try
Hi, thanks for the tip, I guess I have nothing to lose.
I've just found an appropriate screwdriver so here goes.
I saw that thread, but as one of the symptoms involved actually being able to read something on the screen, I didn't pay that much attention.
News soon.
Cheers
Luke
ok let me know.. best of luck
OMG it worked!
Hi, fantastic tutorial.
It took me several attempts to realise that when you say "chip" you mean circuit board.
Pressing and pressing gave no joy, but further investigation showed that I could slip the screwdriver underneath the loose connector and engage it from there.
Yes bad design on HTC's part, there should be some sort of physical lock, or at least a block underneath that pushes the connector into its socket.
However nice the phone was, the WM6 bugs & glitches were annoying, the USB connection still doing that really annoying thing of connecting and disconnecting every few seconds, so it's going to be hard to retrieve the photos; GRRR!
Does anyone know of a program that can block send files from the phone, either over wifi or bluetooth??
Anyway, many many thanks Siddharthsai, at least it's up and running. I doubt I'll be using it much now, despite that superb screen, my insurance replaced it with a Desire, and I have to say I'm impressed with my new toy
Oh yes, where's the command for auto screen lock? It's annoying me.
Many thanks again
Luke
Getting there
OK so thanks to Diamond tweak I was able to stop the screen locking every 5 seconds.
The USB problem is mechanical; I forced the phone down onto its mini USB plug really hard and it stayed connected. Thanks to SuperCopier 2 I was able to dump the contents before my hand got cramp
Yippee.
So I've got TomTom on the diamond, but no on-board nav on the Desire. My diamond might just end up relegated to being the permanent in car nav unit.
Anyone got a fix for the dodgy USB problem? I've tried all 3 of my mini-usb cables, but they do all happen to be HTC oem.
I guess that's why the micro USB has been adopted.
Thanks
Luke

[Q] X1 big problem - 3.5mm- known + an unknown problem = damage

Hello people!
I still have problems with my xperia x1. I don't have money to buy another phone so I'm using it and would be ok if the case looked good (and if in my country i would find cheap parts) and it wouldn't had so many issues.
I think you didn't understand much from the title, basicly is another thread about known xperia x1 issues + 2 unknown.
So, by now
1- cracking case, scratching easy case
2- phone sometimes turn off when slide opened/closed rough. Can live with that
3. keyboard problems
4.headset problems
4.1. : all the time headphone icon showing on screen
4.2 : sound is not clear, is blured, so I have to pres on the phone in the area of the 3.5mm jack (i mean i have to press on the case in that area) or if i have the mini usb pluged in like charger and moved it back and fw i get an improvement, or by moving the headphone jack against and finding a right position, at firs I thought is form the headphone;s jack but i guess it was the connector chassis on the main board.(the headphone jack was very tight inside and stiff, so the problem wa not from the inner conectors)
4.3: together with 4.2 problem another probleam apeared. when I insert the headphones, sometimes and more and more often, the phone would start DIALING the last log from my call log (e.g. dialed/received) automaticaly. This realy pissed me off. I had to move around the headphones to avoid that, or turning off my phone network. I searched but I guess I am the onlyone with these 2 above mentioned problems (4.2 and 4.3)
So, because i bought this phone as a bargain (60 USD) as a faulty and repaired it, and had no waranty and not being scared to reopen it again, and most of my "quality" of not searching on the internet first, but trying to fix it by myself I found myself writing here a lil bit disapointed of what i did.
I opened it, tried to see wich conector is loose, then tried to put some peace of film to put pressure on the 3.5mm conector, it didn.t work.. then somehow the 4.1 problem apeared. I didn;t got this problem only once in 6 months and i solved it bak then easily with the help of my stilus. Of course I didn;t knew what was causing it. So I tried again with the stilus but this time it didn't work, and I panicked..15 minutes of pain...me trying to solve problem no. 4.2 and 4.3 and got 4.1 wich was there to stay...
started to twist the screwdriver inside rough, put pressure on the small conectors inside and outside,,and then...after pressing on the low conector i did it. It disapeared. So I was like evrika!!! I solved the problem and realisesd what was causing it. Someone else here wrote the same thing in another post, and did exactly like me, or me exactly like him
What it happens is: when headphone not inserted, the conector is touching another conector, and so this means the OFF position. When inserted - the tip og the headphone jack pushes against the conector, detaching the connection making the ON position. So when i pull of the headphones i get the ON state wich meant that there was conection (I pressed with a screwdriver and bend it there so it would alway make a conection).
BUT somehow, I didn't let it, and torn that litle piece , so know I am back again on headphones because I have no conection. So I did a conection and now it's ok but I can't use my headphones anymore + and now my 3.5 mm conector is dead.
Replace? How? Where I can find a 3.5mm chassis? It has 5 soldering conectors. I hope to replace it, and I hope that with this ocasion I will solve the 4.2 and 4.3 problem
Any clues on getting this part? Or a compatible one? Or a better one?
LE: so if you encounter problem 4.1 just insert the stilus in there and move it at the end of the hole or take a cotton bud and clean it with some alcohool, it might be dirty.
http://img825.imageshack.us/i/35mmback.jpg/
http://img853.imageshack.us/i/35mmexfront.jpg/
no more x1 users here?
my X1 have hard-keyboard, scratching problems.
I'm using it more than a year but never had 3.5mm jack problems.
before giving some serious damages you should give your device to HTC or SE repair service.
Ashan85 said:
http://img825.imageshack.us/i/35mmback.jpg/
http://img853.imageshack.us/i/35mmexfront.jpg/
Click to expand...
Click to collapse
thanks for photos! just fixed my 3.5 mm jack

[Q] Audio jack stopped working ! HELP !!

this happened a few hours ago and i've been runining around to find a solution.
i was going through my day enjoying my music on the SGT through my headphones. and suddenly, connected the headphones, and BAM sound is coming out to the left headphone ONLY. i know about pushing the jack all the way in.done that with 3 different headphones..nothing!!!i have overcome 4.1 on my SGT. tried installing the rom again, played around voodoo sound a bit..nothing.and here i am helpless and depressed!! if anyone please give me a hint on what to do !! and again..this happened out of no where all of a sudden!!
Sounds like a hardware issue. Maybe lost the physical connection for the contact to the right headphone, would have to re-solder if possible. Then again, this requires physically opening up your tab and checking everything going to the headphone jack. I advise against opening it if you don't know what you're doing.
bigz1981 said:
Sounds like a hardware issue. Maybe lost the physical connection for the contact to the right headphone, would have to re-solder if possible. Then again, this requires physically opening up your tab and checking everything going to the headphone jack. I advise against opening it if you don't know what you're doing.
Click to expand...
Click to collapse
damn. didnt want to hear that...but could this happen suddenly ? i mean the tab wasnt exposed to anything that would cause the jack to disconnect.no shocks no falls no water nothing !!
anything can go wrong at any time with electronics...sometimes it just happens. I've seen it working with computers for over 10 years. Something fails for no apparent reason and it can't be explained.
EDIT:
It's a long shot, but try taking out the battery for a few mins, then putting it back in. It's worked for weird glitches I've had on my phone...
Have you try another ear phone set?
Sent from my GT-P1000 using XDA

P970 showing the headset sign even when the headset is not connected

Hi All,
I am using a LG P970 and since yesterday it is showing a headset sign on the screen whereas there is no headset connected on the phone due to which I am not able to use the phone without the headset. I have never used a headset on this phone wondering what is happening.
Also, as soon as i connect a headset it starts playing the music. However it works fine on Bluetooth which I use often.
Any ideas on how can i get rid of this sign and use my phone normally.
Please help.
Thanks
Try to reboot the phone
Sent from my LG-P970 using xda app-developers app
Thanks for the quick response. Already rebooted my phone a few times. Removed the battery also but same problem.
Just did a factory reset of the phone also but the problem did not get rectifed.
This happened in my LG GT540, i used to plug in a headset and unplug it and that would work, after a while it came back, then i sprayed some WD40 on the tip of the headset plug, and pluged into the phone and fixed it... for a while
If your phone still in warranty, just take it to LG
Hope it helps
Happened to me after my son spewed water on the phone. A good cleaning with a table napkin and inserting/removing the earphone did the trick.
There might be something that's causing the plug to think there's something in it. If you're lucky a bit of cleaning is all that's needed.
It also happened to me after a big rain. There is water or some metallic debris in the connector. Blow it really well, or use a dryer on a very low or even cold setting. if there is water it could cause a short so be careful!
Happened to me too, cuz a friend accidentaly splashed a beer on it ! for me the headset icon apparead everytime i approched the hand near the proximity sensors...so i couldnt call anymore. Send it to assistance!
Just air you might have something shorting out the connector in the phone
Sent from my LG-P970 using xda app-developers app
Thanks everyone. When I cleaned the headset jack on the phone with air and some clips (after I powered off the phone) it worked. But unfortunately, I had already done a factory reset of the phone prior to doing all this as I was not able to use my phone.
Thanks again.
problem
I have a problem with my lg optimus black p970. it shows the earphones plugged in even when their unpluged. I already changed the thing where to put the earphones in. but nothing. what could it be???please HELP :crying:
abourdeau said:
The way you talk it seems like you didn't read the entire thread.
Please read, take action and come back if you still have a problem.
Click to expand...
Click to collapse
I read it. But i did all of thoes tings.but nothing helped. I did that with the fireware...i changed the erphone thing... but nothing..I have an Idea to clean all the microshems but i'm afrade that after that the phone wont work at all.

Categories

Resources