HELP!!!
i've installed this advanced config along with the .net compact framework 3.5.
i've made a couple of meaningless adjusments in the advanced config and after that my default programs like file explorer, tasks, contacts, calendar, office mobile and the rest of them just stopped working. i mean tottaly. whrn i want to open any of them absolutely nothing happens. after this i uninstalled all of the added programs and tried to turn off the phone but it wouldn't turn of. it disabled the network adapters and thats it. it DID NOT turn of. i reseted it several times and nothing.
please PLEASE help me. i just got my device (touch diamond) several days ago and now i can't get anything to work.
what do i do???? i'm going mad!!!!!!!!!!!
Did you do a Hard reset yet.
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
Or just Clear Storage
please delete this one or pretend you haven't read it at all
u mean the previous post?
can u help me? i really dont know what else to do, that is i'm kind new at pocket pcs.
Related
Can anyone advise how I can reset my device to the original state it came in the box. My previous device you had press 2 buttons on the keypad and the reset button. Anyone help with the Kaiser?
Thanks,
Sunny.
Settings -> Sytem -> Clear Storage
Make sure you have backed up your data.
gogol I am your new best friend.....many thanks!
Hold in two soft keys and then reset with stylus thats a true hard reset. Much more info posted in the first sticky in Kaiser Upgrading Thread
"true" hard reset? I think it is the same thing with that "Clear Storage".
Just read the manual and I did once.
Hi sunny
I hope this will help you:
HardReset: Hold Talk and End soft key - Reset :When prompted push Green Talk Button
Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus
Thanks Chris and others. Very useful!!!
Hi
My device has gone really wrong all of sudden. Keeps locking up, weird application corruption etc. I have taken out the battery a number of times. The phone boots up and seems to be ok, but if I slide out the keyboard nothing happens on screen. If I try and make a call the touch screen will not work to dial a number. Weird screen corruption. I thought this device was too good to be true.
I want to do a hard reset. HOwever not sure what the buttons are.
HardReset: Hold Talk and End soft key - Reset :When prompted push Green Talk Button
What is the "hold talk" and end soft key?
This will clear up any confussion i hope:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
I did the search, but not finding anything...Thanks for the help
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
austinsnyc said:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
Click to expand...
Click to collapse
This is the information I found... bu t I HAVE NOT been able to get my Tilt to Hard Reset from pushing any combination of buttons...
But this does work...
grizzley said:
you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Ron
I know this already. I am looking for combination of bottons + reset. As press softkeys + reset for 8525...etc
grizzley said:
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Don't forget about your good friend, WIKI.
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Jim_R said:
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Click to expand...
Click to collapse
interestingly, it does not work on my TyTN II.
However, its working on the Trinity.
It worked on my Kaiser/Tytn ll. Thanks!!!
not for me :-(
Hi,
maybe me being stupid, but this procedure does not work for me. Problem is that I installed software for the iGo bluetooth keyboard (I know ...) and ever since the Kaiser is resetting itself every 30 seconds. So what I get is only the smart mobility message, a short vibrate and then back to start. Anyone any idea how to get out of that? May I just press the wrong softkeys?
many thanks in advance
eRay42
new situation: the keys I press are definitely the right ones, I can also get into bootloader mode. I flashed the original rom (RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship) back which finished successful but the situation is the same. When I hard reset I am told it has been done, being asked to press the green button and it reverts to the old problem immediately. I should say that I have not modded my device so far, it was in original state before I installed the above mentioned software. Could it be a coincidence and it is a hardware problem?
HELP!!!
I found hard-resetting my HTC TyTN "GB" somewhat unpredictable. Holding down both soft keys while depressing the reset buttone is the correct procedure. It's either related to the HTC_END.cab. Do you have this installed?
Cheers
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
pietrucci said:
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
Click to expand...
Click to collapse
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
pietrucci said:
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
Click to expand...
Click to collapse
Pencil trick worked for me tooooo
reset
thank you..my tilt went crazy and won't bot...just keep restarting and turning off.
I had to use the pen and hold down
damn it now i have to restore everything
No still not working. These button things doesnt work. BTW does using Clear Storage give same effect, anyone?
I also haven't been able to perform hard reset on my TyTN II with the Soft Keys.. it just keeps rebooting! Can anyone help me?
Cumpz
LoL.. nothing like keep trying..
Already got it..
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
icum said:
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
Click to expand...
Click to collapse
It's in the Kaiser Wiki, under 'Kaiser resets'.
this is what is says...
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
* Press and hold both soft keys
* Using a stylus, press and hold the soft reset button at the bottom of the phone
* Keep all three buttons pressed until the keypad lights turn off and then flash
* Release the soft reset button while still pressing the soft keys
* Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
* Finally, press the green call button to perform the hard reset, or press other key to cancel
1. what buttons are the soft keys..
2. i pressed the power and the camera buttons then the reset set pinhole button.. release the reset pinhole button after the keypads lights go off still nothing..
Hi guys,
Great forum, unfortunately i can't find a solution for my problem. Here is my problem: I installed Diamond TF3D Config on my phone and i tweaked a couple of things, everything went well untill i changed the TouchFlow menus.
It automatically restarts, but the loading process can't pass the HTC logo screen and now it says:
" The Device is unable to boot because either you turned of the device incorrectly...----- Press SEND to reset your device..."
Well, ofcourse I followed the instructions and pressed SEND, but it looks like it doesn't do anything at all. The error screen above keeps displaying, without anything telling me that something is being done about the problem. Is it doing something or is it just stuck? (The light is continously on).
Can you guys help me? By the way I tried the manual hard reset, but that didn't help.
did you hard or just soft reset?
well i did a soft reset, that didn't work out keep getting that screen.
and I tried a hard reset but that wasn't possible, because i couldn't get in the device, so it pretended it was a soft reset..
but do you know if it is doing something or not , cause i get the screen continously with the lights on
PM the developer... sushilange... and then post the solution here for us all to take benefit of.
Not sure of your full situation, but two options that may help; hard reset, or connecting phone to pc and try running an RUU install; of course all data will be lost, device could be as well.
---- Hard Reset Option ----
To perform a hard reset:
1. Press and hold both softkeys on the device (the little dots above ok, and windows key). Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
NOTE: I had no idea which of the many keys were considered the soft keys. They are the two buttons above the phone control buttons.
2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3. Slide open the hardware keyboard, and press R to restore to factory default or press X to exit the hard reset process.
Note:
Your device will be set back to factory default settings. Please ensure any additional installed programs and user data have been backed up before a hard reset is performed
--- RUU install ROM --- (this is for the mogul, you'll have to find your own, just reading material)
http://www.htcamerica.net/support/mogul/software-downloads.html
k I will. And this guy has the necessary knowledge?
bjason6 , thanx for your help
but I don;t understand.
hardware keyboard, a diamond doesnt have a keyboard or do you mean something else and where are the two soft buttons i cant seem to find them
This is the proper way to hard reset the Diamond (taken from the wiki):
Switch the device off. Press and hold the "Volume Down Key" and "Action Button" (round button), at the same time, use the stylus to press the red RESET button in the stylus silo. You will be presented with a menu saying 'press R to reset, X to exit'. If you press R, your device will be set back to factory default settings.
Hard Reset will delete all data you have put on the device: Programs, Settings, Mail, SMS, MMS, etc., so be careful and make a backup before doing this.
After a hard reset, you will have a complete clean new install of Windows Mobile on your device.
I thought the phone must be on for the hard reset to work, because I doesnt work on y phone
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Yes, bottom left "phone" button is send
YiuW said:
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Click to expand...
Click to collapse
Nice
Now your tekin the pee mate
YiuW said:
k I will. And this guy has the necessary knowledge?
Click to expand...
Click to collapse
Well he wrote the app, so I bloody hope so
damn what the hell is wrong with my phone man damn...
YiuW said:
damn what the hell is wrong with my phone man damn...
Click to expand...
Click to collapse
LMFAO..... RTFM.... dunno
Anyone suggestions to solve this problem??
It doesn't seem that I can acces my phone via usb
Can you enter bootloader? WIKI
yeah i can
What can i do with the boat loader then?
YiuW said:
What can i do with the boat loader then?
Click to expand...
Click to collapse
Sail away ?
Does anyone have any ideas on why I am unable to hard reset my diamond?
I've had a look around the forums but haven't been able to find anything.
Doing the standard Vol Down + Enter + reset but it only does a normal soft reset.
Is the "Clear storage and format internal storage" option from the system settings the closest to a hard reset?
Thx in advance
stem
stemarlen said:
Does anyone have any ideas on why I am unable to hard reset my diamond?
I've had a look around the forums but haven't been able to find anything.
Doing the standard Vol Down + Enter + reset but it only does a normal soft reset.
Is the "Clear storage and format internal storage" option from the system settings the closest to a hard reset?
Thx in advance
stem
Click to expand...
Click to collapse
well yes - that is the closest. but before that (since it'll format internal storage too) try this:
1a. press the red soft reset button, release it and immediately (i mean immediately) follow 2 OR
1b. turn off ur fone - keep the top power button pressed, and tap yes to turn it off... once turned off... press once and release the power button and immediately follow 2. OR
1c. take the battery out. put it back in and press the power button once and release and immediately follow 2:
2. press and KEEP PRESSED... Vol Down & Enter (center circle) until the screen shows up asking u to format blah blah...
Are you holding the Vol. DN. & Enter buttons, or just pressing & releasing?
I find the easiest way is to follow steps 1c & 2 written by Cloudedhopes. But, here is a more detailed instruction if you need:
1) Remove, then replace battery {ensures the device is completely off}
2) Press & HOLD: Vol. DN. & Enter buttons
3) Press & release: Power button
4) Release Vol. Dn. & Enter buttons only after grey confirmation screen appears!!! <Very important!
5) Press Vol. Up {resets main memory only; Internal storage is not affected}
6) Wait for device to reboot {You are now hard reset}
If this does not work then, there is something wrong with your hardware. Check to make sure the Vol & enter buttons all work.
@ CloudedHopes: Using the "Clear Storage" program will not clear out the Internal Storage unless you ask it to.
Worked
Thanks to cloudedhopes and Humblehippie
Finally got it boy's
A funny story to it
I had one of those thick mirror screens (screen protectors) on my diamond screen and also on the HW buttons (inluding the Enter button).
The enter button worked fine, or so I thought, for exmaple, I would select calender and hit the Enter button and it would open up the calendar no problem.
So her I am thinking its something else
Anyway, I remove the plastic bit form the Enter button and try to hard reset... VIOLA! Hard reset worked.
Moral of the story? Does not seem to be competely idiot proof
Thanks again guys
stem
hard reset problems...
Humblehippie said:
Are you holding the Vol. DN. & Enter buttons, or just pressing & releasing?
I find the easiest way is to follow steps 1c & 2 written by Cloudedhopes. But, here is a more detailed instruction if you need:
1) Remove, then replace battery {ensures the device is completely off}
2) Press & HOLD: Vol. DN. & Enter buttons
3) Press & release: Power button
4) Release Vol. Dn. & Enter buttons only after grey confirmation screen appears!!! <Very important!
5) Press Vol. Up {resets main memory only; Internal storage is not affected}
6) Wait for device to reboot {You are now hard reset}
If this does not work then, there is something wrong with your hardware. Check to make sure the Vol & enter buttons all work.
@ CloudedHopes: Using the "Clear Storage" program will not clear out the Internal Storage unless you ask it to.
Click to expand...
Click to collapse
I have a big problem guys and need good help fast...
My diamond flipped out on me last night. Soft reset doesnt do squat and it keeps freezing at the first page displaying text: Touch Diamond (and some red lettering on the bottom taht indicates the ROM or some thing like that)
I have tried a hard reset and it doesnt do anything different, just keeps showing the screen where it used to freeze up before and the buttons doesnt do s**t (buttons all worked properly before, I was doing some web surfing and listening to music when it crashed the first time, so I was adjusting the volume and using the enter key quite often)
Now, everything I have tried just keeps freezing it up at that same "welcome/bootup screen and I seem to be quite "bent over" right now...
Do you guys know about an issue regarding my problem and a possible solution? (need the phone for work and all my costumers infos are on it with a backup of it on the internal memory (I know, not bright at all and I realize it now!!)
Any help and suggestions are more then welcome...
HELP!!
I have managed to do hard reset after all...
It seems that my version of the touch diamond is different, even from my users manual
To do a hard reset I must hold POWER, VOLDOWN and ENTER, then press the soft reset button...
But afterthe hard reset, I found out anotherproblem... Opera doesnt work anymore, seems like its not even installed! Its missing a bunc of files.
Did the hard reset had a problem and screwed up the reinitialization process or is it normal?
How can I get it working? (IE is not to my taste and cant even do the landscape mode)
Please someone, need some help!!
Can't remove pass
Unfortunately my Vol down button isn't working and I cant make hard reset. But i have passworded my phone and cant manage to remember what numbers i wrote exactly ( or especially my kids did). Is there another way to remove password except hard reset? I even agree to format the whole device and install directly Android. So far just found how to make dualboot but for this purpose i have to enter file explorer... which i can't do because I have a password at beginning before even start the OS's interface. If someone can help me please wite here or at my skype didkuivanov
Hi guys!
Yesterday my Kaiser hang and I had to do a Soft-Reset. Now, it boots into windows and immediatelly resets...I tried to make a Hard-Reset but it seems the soft buttons doesn't work, although they work fine in Windows...
After that I tried to flash a new ROM via SD card but when I press the Power Button to start the update, it does nothing, nor the Action Key to Cancel...
Do you have any idea of what it can be? I really need some help because I cant do anything with it....
Regards!
et_pedro said:
Hi guys!
Yesterday my Kaiser hang and I had to do a Soft-Reset. Now, it boots into windows and immediatelly resets...I tried to make a Hard-Reset but it seems the soft buttons doesn't work, although they work fine in Windows...
After that I tried to flash a new ROM via SD card but when I press the Power Button to start the update, it does nothing, nor the Action Key to Cancel...
Do you have any idea of what it can be? I really need some help because I cant do anything with it....
Regards!
Click to expand...
Click to collapse
I think you are not doing the hard reset properly, since you are stating that the buttons work while you are in windows. Retry and see what happens.
Yeah does sound like you need a hard reset and aren't doing it properly. 2 ways to do it listed below:
-Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
-A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.
Sorry for the silence guys...
I'm doing the Hard Reset OK, but the phone simply doesnt do it...
Also the Power button doesnt work when installing a new ROM with SD Card...
My phone is in a continuous soft reset :s