Send Reminders to BT car panel - Tilt, TyTN II, MDA Vario III General

When I'm in my car, I use my Kaiser with the car Bluetooth system.
I noticed that the car control panel shows:
- Incoming caller ID (number when not in contacts, contact name when available)
- Phone Low battery warnings
So, the only thing really missing is the reminder.
When I'm driving, with the phone in my pocket, If I hear a reminder sound and I don't remember what that reminder is, I have to take out the phone from the pocket and check the reminder on the screen.
My hope is that the list of 'what to send' is inside the registry, and that 'reminder' could ba added to that list...
Any idea?
Thanks in advance
Alberto

Microsoft Voice Command
Use Microsoft VC. It will announce reminders over bluetooth with full text to speech. it will also read sms messages in full and emails will include sender and subject info.

balsack said:
Use Microsoft VC. It will announce reminders over bluetooth with full text to speech. it will also read sms messages in full and emails will include sender and subject info.
Click to expand...
Click to collapse
It could be great (may the pronunciation will be a little strange in Italian...).
But...
What is "Microsoft VC"?
I just crawled microsoft mobile site, and I didn't find anything...
Alberto

ThunderDick said:
What is "Microsoft VC"?
Click to expand...
Click to collapse
oh, emh, yes, I didn't notice your subtitle...
Thanks, looking for it...
Alberto

balsack said:
Use Microsoft VC. It will announce reminders over bluetooth with full text to speech. it will also read sms messages in full and emails will include sender and subject info.
Click to expand...
Click to collapse
I installed MS VC, configured it to send reminders, sms, etc..., on handsfree device, but nothing happens...
It works on device speaker, instead, but when I'm driving I don't hear it.
Anyway, my preference would be to have reminders on the display of the car, not via voice. As the display shows battery warnings, caller name, the entire contacts database, I hope it could be able to show other information, if the phone sends them to the car via bluetooth...
Thanks for your help...
Alberto

Related

MS voice command vs Voice Speed dial

Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741

SMS Notifier

Hi!
I used this software before in my Ipaq. However when I tried this in my Kaiser, had a feeling that it slowed my Kaiser and also freezed it.
Anybody know software which is doing:
- Answer preconficured sms-message to caller if I am not answer or press hang-up
- Add this call to my calendar, with text what sent to caller
- Check my next availibility time and adds it to that sms
Like: "Automatic response: I am not available right now. I'll call you bac as soon as possible. According to my calendar I'm free at 14:30."
Like that... you can check sms notifier software from the webpage: http://www.codeplex.com/SMSNotifier
Nobody have any suggestions?
Try http://www.pocketx.net/products/photocontactspro_sm/

missed call and sms reminders

hi, apologies if this has already been covered but the forum search engine is not the easiest thing to use when you are not sure what the question is!!
has anyone written anything that would give this device the ability to give periodic reminders, ie vibration alert or a beep of sorts to remind of missed calls or text messages? i am quite sure its not something which comes as a feature on the device but would be really useful.
AlarmPal from PocketMax - get it from here - is the only reliable solution I know of....
You can (supposedly) patch the registry to enable the "Repeat" option in Sounds & Notifications for any entry where it is currently greyed out (like missed call, new SMS etc..) - check out this post for all the details - I've tried this in the past and I found that the notifications kept going even after you'd read the SMS or dealt with the missed call......YMMV
Hope that helps
Mark.
excellent, cheers. looks like just the badger i was after.
On the samesite is fone alarm been using it for over a year, fantastic solution.
zakiwashi said:
hi, apologies if this has already been covered but the forum search engine is not the easiest thing to use when you are not sure what the question is!!
has anyone written anything that would give this device the ability to give periodic reminders, ie vibration alert or a beep of sorts to remind of missed calls or text messages? i am quite sure its not something which comes as a feature on the device but would be really useful.
Click to expand...
Click to collapse
Do a google search for don't forget 2. Freeware.
But I prefer Phonealarm myself
SPB Phone Suites also has this feature, along with a nice today photo contacts option.

Alerts for incoming e-mails - specific address

Hey...
I asked this question a while back in the PPC6700 forums when I had that device on WM5...never found an answer. I'm hoping something has changed in that time frame.
I want to be able to have audible alerts for incoming e-mail, but ONLY from specific senders. Using SMS is not an option.
So, for instance if I get an email from [email protected] it will ring an alarm (at 3am and wake me up) but if is an e-mail from anyone else it will stay silent.
Any way to do this, even if I have to purchase an additonal application?
thx!
I realize that its name, Photo Contacts Pro, is a bit misleading, but this is a very powerful/flexible program that will do exactly what you're looking for. Take a look at its incarnations at the vendor's website and decide for yourself -- there's alot there to read:
http://xxx.pocketx.com
Thanks Mark,
Are you 100% sure that this application can do what I ask?
I looked on their website and their features list that you can assign distinctive Ring and SMS tones to different contacts. It doesn't mention anything about e-mail.
I would plan on using pocket outlook with push mail from an Exchange server...so I really think it would be the function of the mail client to differentiate one incoming e-mail from another. Maybe there is a more feature rich e-mail client that has this functionality?
If you have actually done what I have asked (distinctive alerts to specific EMAIL addresses), then I will download the demo and see what I can do...
thanks again!
bengalih said:
Are you 100% sure that this application can do what I ask?
I would plan on using pocket outlook with push mail from an Exchange server...so I really think it would be the function of the mail client to differentiate one incoming e-mail from another.
If you have actually done what I have asked (distinctive alerts to specific EMAIL addresses), then I will download the demo and see what I can do
Click to expand...
Click to collapse
Hate to disappoint but it will not do that. This software currently operates on incoming caller id (sms has that also) not email address. I did suggest the use of email to them in addition to sms so they may someday do some work on it but not now.
Although I don't currently know of anything that will do what you want (which doesn't mean it isn't available) you MAY be able to get around the limitation.
I would try having the exchange server fire out a short note or even a forward of the email to your phone's sms address. They all have the ability to get the email as sms albeit it would be chopped to 160 chars. Now, if you can identify the source of the incoming sms via caller id you can indeed use photocontacts by creating a special profile with silence being the default for all contacts except the exchange server forwards. This way the incoming sms will set off the alarm which will tell you to check your email.
Hey, better than nothing, no?
eh..yeah thanks NY... I was afraid of that answer.
What we did for our alerting system previously was have the alerts sent to the phone mail/SMS address and all other e-mails to our normal exchange. This way we would turn on SMS alerts and turn off e-mail. It does work, but not the ideal solution. It would be so simple to have this functionlity in pocket Outlook as a "rule" too bad they haven't gotten there yet!
thanks
having that kind of selection hasn't gotten that far yet, don't forget this is a pocket pc with phone capabilities
bengalih said:
... I want to be able to have audible alerts for incoming e-mail, but ONLY from specific senders.... Any way to do this....
Click to expand...
Click to collapse
I'm aware of a couple of programs that will alert based on email sender, subject, etc. The first is Message Alerts, and the second is Watchflag. I've never used Watchflags before, but it looks pretty good. I used Message Alerts back when I had a RIM Blackberry. It worked perfectly.
Try also phoneAlarm V2.0 not 1.66 from http://www.pocketmax.net
This is a new option in V2.0
Beautiful guys thanks! All 3 look like they will do what i want (from description) I will try them out.
thanks again!
bengalih, thanks for the link. Question for you, did you ever try one of these programs? I guess my request is a little different than yours was in that I am not trying to notify by email address but simply by email account. So one notification for my Yahoo, another for my daughters and yet another for work. If one of these apps can accomplish this, then that would be great. Thanks again.
Email notification
This is only mildly related, but I want my new email notification to show the sender and/or subject line and not just "You have ## new email messages..."
I can't find any notification settings that would adjust this. Any suggestions?

SMS auto reply

Go to Text Message => Menu => Tools => Options => Account Setting => uncheck Request delivery notifications
huh ?
well...not sure what you're talking about. but for those for you who is actually searching for a program to send auto reply text's....here it is.
I also built a SMS Auto Reply tool.
It can send customized responses to your Pocket Outlook contacts, or a generic response to anyone else.
The next version (Being released tonight) will log the intercepted SMS and phone calls to the Pocket Outlook Calender, so you can visually look at when calls came in during the day.
http://www.trinketsoftware.com/powersms/Download.aspx
This is all you need...trust me
AllTheWay said:
http://www.trinketsoftware.com/powersms/Download.aspx
This is all you need...trust me
Click to expand...
Click to collapse
Hot! All i can say... (other then the board requires reply to be at least 10 characters long)

Categories

Resources