I have searched through the posts and cant work out what i need to do, my bluetooth works for most things (syncing, sending files etc) however it cannot recieve files from another phone or pc. Only with activesync does it work to recieve.... Any ideas? do i need a new stack?
Cheers
Hello! Have you enabled "Receive all incoming beams" in Settings/Comms/Beam?
Thankyou very much, that was the problem. I thought beams were IR or something. One last question, i am now able to receive files but is there any way to browse the PDA via Bluetooth from my laptop? again it says, it cannot do this.
Navigation from your Laptop
Hi
You have to pair your BA with your Desktop installing the "OBEX File Transfer" service. So you would navigate in your PDA.
i HAVE A KAISER TILT ALSO KNOW AS ATT TILT AND AM HAVING TROUBLE DOWNLOADING MY CONTACTS TO MY NOKIA BLUETOOTH CAR KIT HAS ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST IS THERE ANY SOFTWARE I NEED TO ADD TO THE PHONE. I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL. ANY HELP WOULD BE GREATLY APPRECIATED.
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
anaethelion said:
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
Click to expand...
Click to collapse
dude? why?
hey man sorry that guy was such a jerk dont want that to be your first expericne here as long as you search before asking most people will be more then willing to help you. sorry i cant help ya though. my only guess is maybe did you install a wm 6.1 rom? they have some probems with bluetooth but i dont think thats it
Did you try it without Jetware? Made sure your bluetooth was set as discoverable? Paired the device? The more info YOU provide as to what you've done, tried, & what setup you've done it with...the beter the help & answers you'll get.
I'd suggest filtering through the following threads. There have been similar problems fixed:
http://forum.xda-developers.com/showthread.php?t=364559&highlight=Kaiser+Nokia+car+kit
In the above thread the original poster solved his nokia carkit issue following this:
1. Pair the TyTN II to the car (Nokia HT-2) phone.
2. Switch car ignition OFF and switch off TyTN II.
3. Remove SIM from TyTN II.
4. Place SIM into a compatible phone (in my case Nokia N95).
5. Switch on N95, switch on Bluetooth, switch on Remote SIM access.
6. Change the Bluetooth ID name on the N95 to the same as the TyTN II.
7. Make phone discoverable via Bluetooth.
8. Switch on car ignition - car phone will not be able to connect.
9. Using car controls search for new device.
10. When N95 is found, select connect, it will use the same user profile as the TyTN II (if you selected the same name for the Bluetooth ID).
11. On the car browse to Settings - Phonebook - Update, this will then import all your contacts from your N95 (or compatible phone).
12. Switch off ignition and switch off N95.
13. Replace SIM back to TyTN II.
14. Ensure TyTN II Bluetooth is ON, Remote SIM is ON and the phone is Discoverable.
15. Switch on car ignition - car phone will not be able to connect.
16. Using car controls search for new device.
17. When TyTN II is found, select connect, it will use the same user profile as before.
18. Now browse the car Phonebook as normal - All your contacts are now available for you to use.
19. Don't forget to turn off discoverability on the TyTN II and to rename your compatible phone (N95) to prevent any future conflicts.
This worked for me! I hope it will work for you! Good Luck!
I did try it with removing the jetware the bluetooth works fine but cant download contacts is there anyother patch or software more compatable with nokia bluetooth devices. Jet ware is good but wont let me disconect call when done any one else have an issue like this
BOBBYDS1 is your connection between the Kaiser and the Car Kit using Bluetooth as a headset (in other words the phone still functions and you can look up and dial with the phone) or is it using rSAP (Remote Sim) which switches your Kaiser into flight mode.
I ask this as it will determine which way you look for a solution. If its using rSAP then most Nokia systems that are fitted into cars as factory fit have not yet developed the correct software to communicate with Windows Mobile devices, in which case you will need to remove Jetware from you Kaiser and use my solution on a previous post as quoted above.
http://forum.xda-developers.com/show...+Nokia+car+kit
Mark
The phone still functions as i can disconnect by the phone it self here is the thing sometimes I can disconnect call by the nokia bluetooth device but a lot of times I cannot disconnect, i have to pull phone out of my pocket and end call
@BOBBYDS1 and fb.knight
No offence guys, but you need to go back to Junior High and learn how to use commas, question marks and letter cases.
Posts like that will rarely get you any kind of a reasonable response.
what nokia bluetooth car kit are you trying to use?
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
IT is a Nokia CK15-w Bluetooth Car kit Here is a link to it. http://www.nokiausa.com/A4431279
Also I can surf the internet while it is connected to the bluetooth.
Looks like that model supports:
Hands-free Profile 1.5, Phonebook Access Profile 1.0
(Source: Nokia Europe
The Kaiser supports:
File Transfer Profile, SIM Access Profile (rSAP), Dial-Up Networking Profile, Personal Area Networking Profile, Hands-Free Profile 1.5, Advanced Audio Distribution Profile (I'm guessing A2DP)
(Source: www.theunwired.net
So I'm guessing that whilst it will work as a glorified headset, you have no chance of getting your contacts downloaded! Should be able to get them from your SIM, just not the main memory. Wonder why Nokia removed the rSAP profile? It was on their 610 (rSAP only) 616 (rSAP and Handsfree) then from the 810 and CK-15 it seems to be handsfree only. This could be why so many are having problems with Nokia carkits, Nokia went and changed the supported bluetooth profiles. Funny, I would have thought the newer the model, the more it would have done, but I guess not! Glad I looked into this as I was thinking about 'upgrading' to the 810 for the full handset, guess I won't be now!
I am getting confused, I downloaded the jetstream program to the phone and was able to download the contact list no problem. The problem i am having is when i make a call from the nokia bluetooth when I am done and hit the endcall button on the nokia it does not end the call, I have to pull out the phone and hit the end button on the phone itself. any suggestions on how to correct this.
BOBBYDS1 said:
I am getting confused,
Click to expand...
Click to collapse
Not as much as everyone else reading your post and trying to help!
BOBBYDS1 said:
AM HAVING TROUBLE DOWNLOADING MY CONTACTS
Click to expand...
Click to collapse
BOBBYDS1 said:
ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST
Click to expand...
Click to collapse
BOBBYDS1 said:
I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL.
Click to expand...
Click to collapse
BOBBYDS1 said:
removing the jetware the bluetooth works fine but cant download contacts
Click to expand...
Click to collapse
So downloading contacts isn't your problem, hanging up whilst having jetware installed is? Better post would have been something along the lines of:
"I'm having trouble ending calls on my Kaiser using the end button on my Nokia CK-15 carkit. I installed the Jetware program to enable downloading contacts, but this stops the end key working on the Kaiser, before this it was working fine just the carkit couldn't download contacts. Does anyone know of any settings in Jetware I can try, that would restore the end key function, or other software that would still enable me to download contacts and have and end key?" - That might have got you an answer sooner...
Right, the phone as it comes doesn't support phonebook access, thus you won't be able to download your contacts. Actually, none of the Nokia bluetooth carkits support downloading contacts from the internal memory of a Windows Mobile device, probably because no Nokia uses Windows Mobile (yet).
You add something like Jetware which gives you the ability to access the phonebook, but then you are unable to end a call via the carkit. My best guess is Jetware does something which interupts the commands from the carkit. I'm also guessing your stuck with either having contacts download or and end call option. Add Jetware back and play with it's settings. You may get lucky. However bluetooth is very buggy and the only way to get 2 devices to work perfectly with eachother without running the risk of having to fiddle or loose something is to buy them from the same manufacturer and check they are fully compatible with eachother. Two devices from 2 manufacturers don't always work.
Here are some examples:
Old Ericsson headset, will work perfectly with my old HTC phone and can't even be seen by my Kaiser. Slightly newer one (that has an LCD for caller ID) will work once connected until I switch it off, then requires the old HTC phone to be soft reset before it will connect again. Works perfectly with the Kaiser. Brand new, cheapy Motorola headset does what it feels like with no consistency on my older HTC, again works perfectly on the Kaiser. My Nokia 610 carkit will connect to both phones, but whilst the older phone needs to be soft reset before turning off the ignition (otherwise the phone part of things crashes), the Kaiser will connect and disconnect just as Nokia intend. The carkit will only download SIM contacts. The fix posted above isn't really a fix, it's fooling the carkit into thinking that another phone (the Nokia N95) is the kaiser, downloading the contacts from it and then reconnecting the real Kaiser. Not a fix, but a brilliant workaround.
Also noticed that the CK-15 uses bluetooth version 1.2, the Kaiser bluetooth version 2. This might be something to do with it.
In short, I think you will have to live with either a phonebook, or an end function. Welcome to the wonderful world of bluetooth. It also doesn't help that Nokia hasa a history of making devices which don't work with anything other than another Nokia device...
Is there any way to change the kaiser to use bluetooth 1.2. Also is there a way to contact jetware besides email as they dont reply.
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
BOBBYDS1 said:
Is there any way to change the kaiser to use bluetooth 1.2
Click to expand...
Click to collapse
I seriously doubt anyone will be writing a bluetooth stack v1.2 for the Kaiser anytime soon. I also have a feeling that the versions are hardware, not software related, so its impossible. I think you may have to accept that the Kaiser and Nokia will never play nicely. Why don't you install Jetware, sync your contacts, then either disable it (I'm sure I remember an option in the settings when I tried it previously) or just delete the program? You could keep the installer cab on your device somewhere as its only 500kb for when you need to reinstall it?
If there isn't a phone number on the jetware homepage, I'm betting you can't call them. But I did notice there is an advanced set-up options menu. Did you try unchecking all the boxes apart from phonebooks? If the "hang-up/swap to incomming call" option is unchecked, Jetware should pass that command to the phones standard bluetooth software and give you back your end key. From the Jetware site:
"When this option is unchecked the Extension will allow hang up commands to be processed by the built-in code, which will disconnect all active voice calls."
If it's currently checked, try unchecking it.
BOBBYDS1 said:
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
Click to expand...
Click to collapse
Have you read the manual? In my 610 manual, it tells me I can choose to dowload phone, SIM, or phone and SIM memory. Does yours?
Now it seems that call waiting is not working in the bluetooth unit, itried the settings both ways in jetware but still no go. any ideas
Steve-C said:
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
Click to expand...
Click to collapse
Well, since you asked, it should be 'it's', not 'its'.
Ok i know this feature is for car kits...BUT i had an idea in the past and i never investigated it and now forgot why i thought of it in the first place lol but would it be possible to enable BT Sim Access on your Kaiser and use ANOTHER device (in my case a WM Smartphone "HTC Tornado") to act as a carkit and use that BT Sim access to use data or make calls? Is there a program out there or anything...just wondering..it might sound stupid or crazy but its worth a shot..
pazookie said:
Ok i know this feature is for car kits...BUT i had an idea in the past and i never investigated it and now forgot why i thought of it in the first place lol but would it be possible to enable BT Sim Access on your Kaiser and use ANOTHER device (in my case a WM Smartphone "HTC Tornado") to act as a carkit and use that BT Sim access to use data or make calls? Is there a program out there or anything...just wondering..it might sound stupid or crazy but its worth a shot..
Click to expand...
Click to collapse
One day i was playing with my old N95 and found a BT Hack app or something like this. I took my mom's phone and authorize the BTR connection. I could read her contatcs, send sms'es and make calls, but i could hear and send the voice with that. So that only worked as a dialer.
Cheers,
Chris
Hello my diamonds
I wanted to ask if you know a possibility to phone via the laptop with the diamond using the phone´s simcard.
I´ve already got software that makes me able to send and recieve sms, so it should be possible, shouldn´t it ?
My laptop has a microphone and (oh wonder!) speakers and phoning via laptop would be very comfortable because then i wouldn´t need to use my headset all the time.
thank you in advance, kind regards,
Sklimpel
btw: the search function didn´t help me and sorry for my bad english...
certain bluetooth software allows you to connect ur phone via bluetooth.
You can then use ur com to talk and listen