Hardware buttons not working - Tilt, TyTN II, MDA Vario III General

Hi!
I have searched the complete forum but haven't found a solution to this problem. I upgraded my ROM with the new WM6.1 that became available through T-Mobile. I now notice that my hardware button for Camera and the Scroll wheel don't show up anymore where you get to assign a task to button. I can only start the camera by going to Program's and then select camera. I came across some threads that had similar issues:
1. Remove HTC camera hotfix and
2. Uninstall Windows Remote Desktop
Both of these programs are not on my device so both workarounds are not applicable to my issues with the hardware buttons. Is there a way to change my registry or something of the sort or is it a bug in the official ROM from T-Mobile that is causing the problem??
Any help will be appreciated!
Thanks in advance!

How did you perform the upgrade?
I've not seen the radio version in your sig before so I'm wondering how you performed your upgrade? Was it a single RUU file downloaded directly from your carrier and specifically for your device? Normally official RUU upgrades will upgrade the radio and spl at the same time to the correct, required versions and the wrong radio will definitely cause camera (as well as other) problems.
I have a Windows Mobile 6.0 ROM on my device and as you can see from my sig, my radio is a higher version than your 1.0.18.02. If you check the official ROMs page of the wiki, you'll see that Windows Mobile 6.1 ROMs need newer radios to go with them.

yes, it's the official version released by T-Mobile Netherlands. You can download it via this link: http://www.t-mobile.nl/persoonlijk/...oftware-updates/mda/mda-vario-iii-update.aspx
That's the official ROM released for this Kaiser a.k.a. T-Mobile MDA Vario III

Hi!
I had a similar problem when trying to install Japanese on a English Kaiser.
See here, sorry it's a bit long
http://forum.xda-developers.com/showthread.php?t=333507&highlight=Japanese+ofiaich&page=2
Asukal advised me to try this registry edit.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
“Keyboard Layout”=”00000409″
Ofiaich

Sorry I don't have this registry key in my registry.. I have e0010413

Related

T-Mobile USA 2.21 Custom ROM (HTC Wizard/MDA)

Keep in mind that flashing to a nonofficial rom voids your warranty. I am in no way responsible for any issues you may come across when attempting to update your rom. Please keep your questions about this rom in this thread, various users including myself can help you if needed. Please do not pm me with general questions about this rom or the mda, they would be better answered in the thread.
[ File Name ]
T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US.exe
[ ROM Versions ]
IPL: 2.21
SPL: 2.21
OS: 2.21.4.1
GSM: 2.07.10.
[ Description ]
I was going to wait until the AKU 2.2 update was released before cooking a new rom but I've grown impatient. This is the latest os rom available and while it doesn't add anything new feature wise I have changed some other things around for the better. The first thing I did was update the rom install process to automatically attempt to CID-UNLOCK the device and because of this change I have recompiled all of my current roms with the new installer. The second thing I did was go through ALL of the T-Mobile default customizations and cropped out only what was needed; I also cleaned out all of the other cabs used during the customization process. The third thing was creating a new set of registry tweaks to my liking. In the end, on a fresh boot the device has over 40MB of storage space available and over 25mb of memory free.
If you have issues upgrading to the 2.x roms I would advise downgrading to 1.08 first and then try installing 2.x roms again.
[ Extended ROM Contents ]
Certificatin_Disable.cab - Disables certification requirement for cab installers.
Keyboard_English_US.cab - Sets the keyboard language to US English.
Missing Shortcuts.cab - Creates the MMS Messages folder, MIDlet Manager link & Voice Speed Dial link.
Registry_Tweaks_2.0.cab - Disable gprs disconnect button, disable menu animation, disable message sent notification, enable 4-way ie scrolling, enable 802.11g, enable edge icon, enable bluetooth receive, enable caps/dot keyboard indicators, enable cleartype in landscape mode, hide sim contacts, store ie cache on sd card, show time zones tab (network time update.) *Can be uninstalled.
Smart_Dialing_Enable.cab - Enables Smart Dialing.
T-Mobile_Jingle_Ring.cab - Installs and sets the ringtone to T-Jingle. *Can be uninstalled.
T-Mobile_My_E-mail.cab - Installs the T-Mobile My E-mail client. *Can be uninstalled.
T-Mobile_Network_Customizations.cab - T-Mobile GPRS/MMS/IE/OTA settings.
Total_Commander.cab - Advanced file manager and registry editor. *Can be uninstalled.
[ Download ]
You can download the latest rom update along with previous versions and more from my site:
http://xelencin.shackspace.com/wizard
You may also attempt to get them from the xda-dev ftp.
ftp://xda:[email protected]/Uploads/Wizard/Roms/xelencin/
Enjoy!
just in case I would install a english ROM (german ones are usually quite late), could I change the keyboard language?
Lars
so what's so special about this ROM? Did they remove the stupid battery meter from where the date/time should be? I already like 2.17 even though the caller id doesn't show up on my BT headset as it did on my old JAM. Was it worth the upgrade?
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Upgrade working great so far.
Upgrade!
I have a sickness. I have to apply updates when they come available. It is a strange compulsion. Am I alone? I actually love doing it.
wireless_one said:
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Click to expand...
Click to collapse
I never had this issue but other users are reporting random bug fixes with this OS version so it may help.
wireless_one said:
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Click to expand...
Click to collapse
Since I don't own a stereo bluetooth headset I didn't include it yet. It can be found on my site though under notused apps. ZokiA2DP.
xelencin - YOU ARE THE MAN ! ! !
thanks again for all the work ... I have been using your 2.17 ROM since the day I got my T-Mobile MDA flawlessly and I just saw you released a new one - I'm going to install it right now.
keep up the good work ...
Keyboard tweaked
Just installed this on a Qtek 9100 and now the keyboard is no longer mapping to what the silk screen on the key says it should be. Looks like there are some differences in key mappings between the MDA and the 9100. I did try switching it from USA English to UK English and then back to see if it was a Regional Setting error and there was no change. It is not huge differences, but large enough that when you are using the keyboard that you have to hunt around with the "alt" button until you find the right key you are looking for. The hyphen key now maps to the underscore when you press the alt key now- stuff like that. Will definitly want to be careful if you intend to install this on a 9100 or Kjam, I think.
Aegeas
MDA COMPACT SOFTWARE IN ENGLISH
Hi,
I need an english version software for my mda t mobile compact model.The software I have now is:
ROM 1.13.01BGER
ROM DATE 08.18.05
RADIO VERSION 1.12.00
PROTOKOLL VER 1337.42
EXTROM VER 1.13.129 GER
Does anyone know were I can get the update or eng software for it??
regards,
Visitingmalta
Tmobile USA MDA
Hi,
I am new to this and have been reading the msgs on this forum for a few days now. I just got the new MDA they have available in the USA. I just DL :
T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US.exe
I did not install this yet. Still am a bit confused
I know its stated that it will automaticly unlock the CID, but how about the SIM? Will it also unlock the SIM? If so I guess there is nothing else to do, as it will unlock both SIM and CID and then install the new ROM. If not how do I unlock the SIM?
Also another question I have is RING TONES!! tmo only has a handful of ring tones installed. I have some great ring tones that I have on my old phone. I want to transfer them to the MDA, but where would they be saved to on the MDA, and how would I select them?
Thank You in advance for everyones help.
FM
thanks for the new rom. Im a newbie here and i just used the lokowitz to unlock my o2 xda mini s.My question on this new rom is there a special way to run it or should i just copy it onto my mini s and just execute it. I already unlocked it and im using it for tmobile usa, just need to get the tmo rom. please advise.
xelencin, thanks as always.. i downloaded yesterday from here. Have to wait till after plumber comes and goes before i update... :roll:
Adding A2DP AVRCP
Xelecin:
Nice work as usual. I just barely flashed the 2.17. I was using the 2.8 Qtek Test ROM because of the A2DP and AVRCP. Can this be added to your ROM somehow?
Also, is it bad to flash the ROMs a few time?
Thanks in advance.
just dloaded it - and gonna give it a try...
cheers!
:wink:
what is the difference between the rom's you upload to ftp
I have mda vario. I want to upgrade rom but I'm not sure that I know the right rom available. xelencin upload 3 rom to ftp server of xda-developers(ftp://xda-developers.com/Uploads/Wizard/Roms/xelencin/). I don't know what is the difference so I want to learn the correct rom for my mda vario. Thank you
Do the ipl, spl, radio and os all come from O2 UK ROM? (which is the fastest base ROM I have tried).
Many Thanks
Martin
clock and battery still in same place wtf gives?!?
I installed this ROM on my Wizard. The express reason I installed it was because the wi-fi was non-functional for me on the stock T-Mobile firmware. This firmware doesn't seem to work either in the wi-fi department for me. The Wizard detects my wireless network and I'm prompted to enter a key (I use just WEP encryption). I enter the key and it never seems to connect. I have entered the key numerous times to make sure I have it right to no avail. One time it did seem to make a connection with my wireless network but quickly disconnected. There are other devices on my wireless network so I know it's working. My wireless network is just a simple Netgeat 802.11b access point. This is getting really frustrating. I'm running out of idea on what to try and was hoping for some help here.
Hey,
I just flashed my friends MDA with this new firmware with the 2.21 custom and everything went fine except after its done and i rebooted it, i am getting "Data Crashes. Please contact your system provider" and where the start button is, SIMlock is being displayed. Is there something obvious that i have missed or whats going on? I have the MDA too, succesfully installed 2.17 a few weeks ago. Any ideas?

Kaiser / TyTN II WiFi Problem!

Dear all Kaiser anchestor,
I have a problem with my Kaiser. I really hope that all of you can help me. Ok? Please....
This is the problem :
At the begining, My HTC Kaiser run so slowly, sometimes freezing (Condition WM 6.1 with it's SPL 1.56)
After I read the same problem in jockyw2001 thread, then I tried to flash My device SPL to 3.28 (with the step in front of that thread and the SPL from that thread too)
Flashing the SPL to 3.28 was successfully and my device run fast now
BUT!!! I can't Enabled my WiFi!
Next, I tried to Re-Flash my SPL to 1.56 again, and it's done successfully. But, the WiFi still can't be enable.
Next step, I tried to downgrade the ROM to WM 6, and WHAT!
I still can't Enable my WiFi!
Now, I'd upgrade to WM6.1 again (official ROM from HTC website). But, the WiFi still can't be enable.
The condition when I enable the WiFi is loading then turn off by itself. What's the problem?
I really need all of your help for this.
This is my Device Information:
ROM Version :3.29.707.0 WWE
ROM Date : 05\07\08
Radio Version :1.65.16.25
Protocol Version : 25.83.40.02H
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
I'm stress already. Hope all you may spare some of your time for help me to solve the problem. Thanks before. For more detail, just watch the video that I record when tried to enable the wifi.
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Whats wrong with running the HTC upgrade on your HTC original TyTN II?
andrylim said:
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
Click to expand...
Click to collapse
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Hmm...
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club. But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Thanks for your reply Boss!
or this one
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Flying Kiwi said:
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Click to expand...
Click to collapse
Use the official upgrade package - not just the rom file
andrylim said:
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club.
Click to expand...
Click to collapse
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Click to expand...
Click to collapse
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh.... Btw, I've read from another thread (Athena). They said that someone ever got a problem like this. The cause is the WiFi MAC Address is missing/erased? Is it possible? I thought that MAC Address is a serial number of WiFi such as an IP, where saved in WiFi chip/device and cannot be erase. If do so, how to set an MAC address to the WiFi module? Do you have an idea? I'd tried to have a silly search about that address in Registry, but I cannot find any key that sounds about MAC Address. (Mac Gyver maybe?)
Flying Kiwi said:
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Click to expand...
Click to collapse
More specifics needed
andrylim said:
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh...
Click to expand...
Click to collapse
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Btw, bro... I've been search a problem like this in this website. I've found the same problem in Athena thread. They said that the MAC address is missing, but some one make a fix but only for Athena.
this their URL: http://forum.xda-developers.com/showthread.php?t=387454&highlight=Athena+WiFi+Problem&page=5
Thanks & sorry if i waste your time in solving my wifi problem
Flying Kiwi said:
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
Click to expand...
Click to collapse
andrylim said:
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Click to expand...
Click to collapse
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Click to expand...
Click to collapse
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Hahaha... thanks. Btw, I have another problems.
I bought this device from other country (Singapore). My friends said, the Singapore HTC can view the device history. They can see if the device already being flash how many times and anything unofficial program such as SPL or radio, then the warranty wil be void. Because, my friends already have such a problem also with his device Dopod U1000 (Even he revert to his original SPL or radio).
I think i should throw this device or sell it out and buy the new one. Hiks...
Flying Kiwi said:
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Click to expand...
Click to collapse
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
Doesn't it make sense to at least try what's been suggested first? What have you to loose? The hardware company have no need to know what 'ROM Action' has occurred in the past and who knows what any people you've leant your TyTN II to may have done with it..... They only need to know how it is now and whether it's currently official (ie flashed using the HTC upgrader).
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
I'll give you $50 for it.
The same problem
Im having the same problem... my wi-fi do not turns on! I have flashed this a lot of times, and sometimes works, sometimes dont.
Does anyone have any ideia about this? im stressed becouse i have the same problem... could anyone tellme a good radio in order to try to solve this issue? thanks
Wi-Fi issues
This has worked for me, dont know if its the same case with you or not.
My device was never able to connect to my Wifi n/w at home. If I went to start -> setting -> connections -> Wifi, it would show my home n/w as available, when I tried to connect to it, the status changed from Available to "connecting" then became available again.
In my home n/w I had access type authentication as WEP keys + Mac address filtering. My device was added to the MAC address list so that was not a problem. The issue was access point authentication which was set to WEP keys type authentication on my router. Once I changed from WEP keys to WPA-PSK (data encryption type TKIP) my WM was able to connect to the router.
I have HTC tytn II and its wifi is not searching any other wifi devices or router even in very close range , but wifi is turning on and the green light is also blinking
So, is there a hardware problem?
I did 3.29 hard spl , hard reset ,hard spl 3.34 , but the result is same.
and in network adapters IEEE 802.1b/g goes down and down in the list of network adapters , please HELP.! and sorry for my bad english
try a newer radio
mfsr98 said:
try a newer radio
Click to expand...
Click to collapse
Currently the Radio Version is 1.70.18.02
before this Radio Version I had 1.65.*.*

Tytn Ii Rom Upgrade

Hi all,
I have TYTN II which was bought in duty free and it is not connected to any network.
ROM Version: 1.81.415.4 WWE
ROM Date: 10/29/07
Radio Version: 1.27.15.32
Protocol Version: 22.51.88.13H
Bootloader (TriColor) screen showing following:
KAIS130
SPL-1.93.0000
CPLD-8
Serial
Please let me know if i can upgrade my rom to the latest one HTC TyTN II-RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
which i downloaded directly from the HTC but without previously upgrading with HardSPL 1?
Thanks
Yes but why
You don't need to install hardSPL to run the HTC official upgrades from an existing official HTC installation. It's a very straightforward process but be aware many people have found the HTC official TyTN II Windows Mobile 6.1 upgraded ROM to offer deteriorated GPS performance with times to get a satellite lock taking significantly longer. I also found the latest WM 6.1 ROM and Radio combination (what you're looking at upgrading to) to contain quite a few bugs that weren't even in the original WM 6.0 ROM. If you upgrade and don't like it, it's not a straightforward process to put it back again (the HTC repair centre reverted my TyTN II) so make sure it's what you really want.
***Edit*** If your new ROM is for a different region eg Europe vs South East Asia, the ROM *may not be accepted either (I've never tried but I know flashing different languages is a definite nono the 'official' way). If the HTC Website offered up this ROM for your serial no, it should flash through ok.
Thank you for prompt answer Flying Kiwi ,
I have to try upgrading ROM to the latest one in order to try fixing problem i am facing described in this thread http://forum.xda-developers.com/showthread.php?t=434884
Now, is it worth trying to upgrade to the latest ROM or my problem is of hardware nature?
Thanks
ROM flashing to fix such an issue not advisable
jeremija_de_niro said:
Thank you for prompt answer Flying Kiwi ,
I have to try upgrading ROM to the latest one in order to try fixing problem i am facing described in this thread http://forum.xda-developers.com/showthread.php?t=434884
Now, is it worth trying to upgrade to the latest ROM or my problem is of hardware nature?
Thanks
Click to expand...
Click to collapse
I've replied to that thread but I strongly suggest you don't go down the path of flashing a new ROM (even if you could) to fix a problem present in the device with an HTC official setup like this. It's time to call HTC and (possibly) send it off for Warranty investigation if you have correctly prepared the desktop PCs first. I'm sure that HTC wouldn't release a ROM which had issues that significant on a device so I'm sure the problem is not with the ROM itself.
gps software upgrade
hi
i have a problem that while purchasing my tyttn 2 the rom installed doesnt have the gps software . any body can provide me with a serial for another fone that can get me the software as while providing my serial they are giving me the update of the middle east which doesnt include the software

Kaiser doesn't call after 1 call

Hi I'm new around here. Thanks to the NOOB install guide I could install a great rom from this site. It worked great... untill I made a call. I called someone and after the call I couldn't call anyone untill I soft reseted the phone. I tried to install another rom for the kaiser and I even tried the wm 6.5 rom. They all work but after 1 call the call function cuts working. Is this an common problem?
Could someone help me
you're obviously new here, so welcome!
somehow, i think you're under the impression that we are mind readers
did you search here on the forum? did you read the wiki? which particular flashing guide for noobs did you follow? which ROMs EXACTLY did you try?
what i mean to say is BE PARTICULAR and DETAILED in your posts...and this is a NECESSITY if you are starting a new thread...which really doesn't seem appropriate (yet) because your issue SEEMS to be caused by an unmatched radio version and/or SPL version...BOTH SPL version and radio version must be versions that are meant for windows mobile 6.1/6.5 if you tried 6.1/6.5 ROMs. i have a feeling your SPL is one meant for windows mobile 6.0...another possibility is that the ROMs you tried DID NOT come with a radio (some ROMs do, some ROMs don't) and so your radio version might also be one meant for windows mobile 6.0.
please read the wiki to find out how to determine your radio version and your SPL version...then post back here
you might want to re-read the noob flashing guide also
and to reiterate, always be detailed and always SEARCH thoroughly
good luck
same problem
I have exacly the same problem.
I used Kaiser Unlocker V2.0 Made by Olipro - 2008
The phone actually dials the numbers but there is no sound either out or in.
also when recieving a txt message the vibrate remains on contant.
My Kaiser is running WM6.1
operator v 24.328.1.610
Rom version 3.28.61.0 WWE
date: 05/02/08
Radio Version 1.70.OliNex
protocol version 25.65.30.04H
Honestly i'm less than a neebie! Although an experenced PC engineer, I only wanted to undo the Orange SIM lock before I go overseas for 6 months to an area that only operates Cable & Wireless mobile.
Mentioned above is a note about out of date radio version, the Rom date does seem a little old for WM6.1, what should I be looking for to update the radio?
any advice is greatly recieved.
Thanks
Ian
the unlocker essentially uses a "special" radio+SPL combo that is meant for unlocking ONLY
you seem to still have the said radio version (indicated by the "1.70.OliNex" string)
so verify that your phone is indeed sim unlocked. then proceed to change your spl and radio to the recommended ones for windows mobile 6.1. the unlocking should "stick" after changing the radio+spl combo but do verify before starting and after completing the update.
nice to see you are a PC engineer so you'll have no trouble thoroughly reading the wiki (first link in my signature) and making sense of the wealth of information there on how to update your radio (get a suitable one from the "Ultimate Radio Thread" linked in my signature) and spl.
good luck!
Thanks very much, a temp radio... that makes sence.
Thanks again
Ian

Help needed reverting back to WM6.1

Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.

Categories

Resources