TF3D Display issue - Touch Diamond, MDA Compact IV General

Hi all,
This morning my phone was still doing fine, alarm went off, display was normal. When I unplugged it from the charger to go to work, the display turned into the attached screenshot. Funny thing is it wasn't hanging, the numbers on the clock was still flipping over
Has anyone seen this before, but more importantly, is there a fix for it?
Thanks

I had that. Only thing is to re-insert the battery.

lude219 said:
I had that. Only thing is to re-insert the battery.
Click to expand...
Click to collapse
I did a soft reset, which fixed it. Just a bit concerned as yesterday early morning, while charging, the phone hanged.
Maybe time for a new ROM

Thats if its a software issue and not a hardware issue. I've posted on this problem I have and its similar to yours.
Its related to the 3d driver from htc. either its the poorly written api or the poor 3d chip is the culprit.
Disable TF3d and you will not see this happening again. But then, it wouldnt be a diamond without Manila, would it?

Might be a good opportunity to "upgrade" your ROM....

alright after almost 1 week of testing, I can finally conclude that this problem has disappeared.
I've tried changing to v1.93 Olinex and tested the roms from SwiftBL, Panosha, Vic etc. None was able to resolve the problem until I tried Dutty's v2.6. The problem no long appears and has been rock stable, be it overnight or normal usage.
A closer look revealed that Dutty's rom has a newer version of Manila, while Swift and Vic (not sure about Panosha)'s romes had an older version.
Give it a try guys and see if it works for you.

Related

Display after charging

Hi There,
I have an HTC version TYTN 2, which is a great piece of gear.
One issue, when i charge via USB port, say overnight when on a business trip, when i check in the morning the large clock from the HTC screen disappears, and the device seems to lock up.
A soft reset fixes it no problem, however wondering if anyone else is seeing this. I have the original HTC shipped ROM.
Thanks,
Derek
I am having the same issue I think. With the original HTC Rom, this would happen 2 out of 3 charges, since moving to the Dutty 6.1 ROM it seems to happen each time I charge overnight.
When I disconnect the phone from the charger in the morning, the blocks on the top bar (tasks, charge, volume) are corrupt - they display as a garbled full box. If I try to use the phone without reseting, the entire display will become a garbled mess, it seems like its not clearing the screen before it writes more information, so eventually it just becomes full.
A simple reset every morning fixes this, but I would love to know whats causing it
Anyone have any ideas what could be causing this? It doesn't seem like its an issue that effects many people, as searches of this site for all the keywords I can think of produce no other threads on this.
-Mat
I also have the same issue as stated above.
Just as an update, it looks like it was batti that was causing the problem. Once I removed that software, the constant freeze ups on charging stopped.

TyTN 2 automatically switches to home screen

Hi,
if I put my TyTN 2 into standby-mode with pressing the on/off-button once and then put it back on by pressing once more it switches automatically to the home-screen every time. That's very nasty if I have take a larger note with long pauses between writings.
I like to have the last used program displayed if I return from standby-mode.
I can slightly remember that I installed a program with such an option. Unfortunately I deinstalled it and absolutely don't know what this was.
Does somebody know a registry hack for this or something similar?
Thanks,
Jiffy.
I have exactly the same problem. Anyone can help?
I haven't tried this myself, but after searching I found these possible solutions here:
http://forum.xda-developers.com/showthread.php?t=361398
http://forum.xda-developers.com/showthread.php?t=307298
http://forum.xda-developers.com/showthread.php?t=356378
I remember reading some time ago about this problem. I guess it was a very known WM6 bug, probably related to security or today time-out issues.
Good luck!
thanks a lot for the thread-links. The problem can be solve by deactivating the auto-lock after x hours in the settings.
This is a nasty bug. If i loose my Kaiser it's completely unprotected.
jiffyspace said:
thanks a lot for the thread-links. The problem can be solve by deactivating the auto-lock after x hours in the settings.
This is a nasty bug. If i loose my Kaiser it's completely unprotected.
Click to expand...
Click to collapse
Maybe the new WM6.1 ROM that has been released for the TyTN II has this bug corrected? You could give it a try...

Backlight turns on!! Tilt WM6.1

I have an AT&T tilt and I just upgraded it to the WM6.1 ROM from the HTC webpage and since then I have noticed that when I turn of the screen, all of a sudden it just lights up for a sec and turns off again, without any reason, is there a way to fix this, do i have to flash it again? what do I have to do?
i have the same issue, seems like after i flashed it happened.. any ideas?
one cool feature is that when it flickers, if u press the screen constantly, it flickers.. like a strobe light.. lol
I have the same problem. It's annoying because I think I'm getting a text or call. and usually I don't receive texts, i have to see it light up then press the mail button to see if I have a new text. ARGH.
My Tilt does the same thing. It's a whiteish-gay light. It'll come on for short bursts or I'll notice it on in the middle of the night, and who knows how long it's on until I notice it.
I had upgraded to WM6.1 a while back, and didn't have any issues, but had to hard reset my Tilt and it has been doing it since.
It doesn't do it all the time, either. Weird.
Mine Does The Same Thing
I hope there is a fix some time for this ..
I'm glad i am not the only one, but havent found a fix yet
I seem to remember there being an issue with screen flicker when the Tilt first came out, I think it was related to having Telnav selected in the today screen items tab. Try removing the checks one item at a time from the items tab, I doubt it will be as simple as a software conflict but it could be worth trying.
I had an issue with SPB Pocket Plus on my today screen, once I moved it in to a tab on SPB Shell the issue disappeared.
Fixxed?
I dont know if it just stopped doing it, I am not paying attention anymore or if one of the many things I did finally worked, but the truth is i havent seen it do it again, Thanks to everybody
It been happening on my Tilt since I got it last month.
This is happening on my tilt too... only after upgrading to 6.1. Glad to see it is not just me, but very concerning that this is a problem directly in the 6.1 TILT rom.
Bump........
Any body have any luck on this? I continue to have this problem.
Adding my voice and another symptom
is anyone else having this problem:
1. lock the tilt by tapping 'device unlocked'
2. tap the power button.
3. the backlight comes on, no picture but instead of flashing it stays on draining the battery
4. tap the power button to turn the tilt back on
5. tap the power button to turn tilt back off again
6. tilt stays off.
the issue did not change with the backlight hotfix.
Maybe try another ROM
Finally, i found others with this stupid glitch
I thought it was a hardware error, so i had AT&T send me a warranty/replacement, and guess what... comes out of the box and STILL DOES IT! Has anyone with this problem tried installing a DIFFERENT ROM, like one from the XDA forums? I'm about to try that, because i am fed up with this. I will report if it works. ARG!
Sorry for the ranting. but in a way, i'm relieved. that there are others with this problem
... It might pay to just go back to Windows Mobile 6.0.....
-=ZYXTIA=-
Different ROM fixed problem, but just had more problems after. Sorry guys.
Me Too...
I am glad that I have found other people with the same issue as me. I thought it was just my phone, as I do a lot of backups and restores after I do something stupid with my phone and I also use a lot of beta/unstable software, and figured it was caused by these. However, it only happened after I upgraded to 6.1 stock ROM. Maybe somebody can figure out exactly why this happens, and then we can come up with a fix. I am just happy that I'm no longer alone with this issue
-Dave
I'm very pleased to know that it isn't just me experiencing this stupid backlight issue.
It started happening the second I upgraded to WM6.1
Funny thing is, it only happens to me if I Lock the phone (keys) and turn off the screen. If I just turn off the screen without locking, the backlight stays off.
It would be really great if someone could come up with a fix for this that doesnt require me to reflash my phone with some cooked up rom
has anyone tried this hotfix?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
i'm experiencing the same problem, will try it and post back as soon as i can
edit: didn't work. got some error about it couldnt remove the old customization tool or something like that
Running the AT&T 6.1 ROM and silly thing turns on by itself at 12 midnight. No connection to anything as I leave it in Flight Mode. Only goes off after I hit the Power Button. Drains the battery down to about half by the time I leave for work at 7AM.
Really is annoying!
Possible Solution
If you are still under warranty, call up AT&T warranty replacement (Customer service is 1-800-331-0500, and just ask for warranty department), and tell them you have this problem. TELL THEM YOU THINK IT IS A HARDWARE ISSUE, and they will send you a replacement, refurbished Tilt. The next one will also have WM6.1 on it, and do the same thing. HOWEVER, it is AT&T policy that after two replacements, instead of getting another one the third time, they give you a refurb of a DIFFERENT MODEL. That is how i got the AT&T FUZE (a.k.a. the HTC Touch Pro, a.k.a the "Raphael"). It doesn't have that problem. But otherwise, i have no other suggestions. i'm just sick of having AT&T screw up the phone's software, and then try to pass it off as quality.
Mine comes on exactly at midnight!
Annoying as hell...and the light from it wakes me up from across the room.
Mack

Diamond: some production series better than others?

I just got my Diamond back from repairs and wanted to compare experiences:
1)
I first bought a Diamond two months ago. It came with 1.37 ROM series on it, the screen wasn't too yellowish, but touch function wasn't responsive and the GPS was a MESS!
(of course, I tried many ROMs official and unofficial, almost every Radio ROM and various Hard-SPL. None of that fixed the problems.)
I could cope with with the other flaws, but I just couldn't bear my GPS wasn't getting a fix, no matter how much sattelits were in view...
It worked at first, but soon started to display '66666' instead of the location and finally, it would never display any location again.
I tried every tips and tricks and softs, it helped giving me more and more satellits in view and apparently active, but at the end my crappy GPS could never turn the datas received into a proper location...
2)
I sent my device back to warranty (after flashing back to official ROM and SPL) and had to wait for about a month.
(the technician at first tought I was just a noob unable to set his phone properly, but after two days of attempts, he had to admit that there was something wrong with my phone and sent it to the the headquarter for replacement of motherboard and so on.
3)
The new phone I got came directly with 1.93 ROM and a little bit more yellowish screen, though, there is no spot or stain on it. So the coulour doesnt bother me.
But from the beginning I noticed the new phone was much more responsive even at the slightest touch.
From the first try, the GPS got a fix in about 1 mn time, with only 3-4 satelits in view.
I installed Hard-SPL and the latest Australian Official ROM, and though the screen seems now a little less responsive than before, the GPS is still working, fine.
I'm a VERY happy user of Diamond now, but I'm still wondering one thing:
it looks like once the warranty technicians understood that I was very demanding about quality and complete functions, they took time but gave me a phone totally different in terms of behaviour and quality of the components sensitivity of screen, GPS etc.
Is there some bad production series that they never tells publicly about, and much more better series that they give you as a replacement once they understand you will bother them until the end of time if you are not satsified?
Plz tell your experience about having received two new diamonds with totally different behaviour and quality of the components.
I guess you are totally right!!!
My first device was pealing paint in the aluminium frame on the second day, work very good by the way.
Now i´m on the second device and i my hardware keys, especially the call button is sometimes irresponsive and i have to push it several times to enter the dial.
Tried cooked rooms as well, and the call button issue still remains, so i´m a little unhappy with my diamond experience.
I've noticed that whenever i turn on my display after having left the diamond unused for sometime the lcd doesn't switch on smoothly, what i mean is that it first displays a grey pattern(only for a ms or so) and then the desktop( lcd off>>grey flash>>desktop). Usually the transition from off to desktop is quite smooth, but in my case its not!
Is this a s/w issue or h/w ?
I've never experienced that particular problem myself, but sounds like H/W problem to me...
just been through a couple of other threads related to the grey screen of death...i've had it once...it happened while i ended a call, had to soft reset to resolve it.
take a look at the grey screen of death i'm talking about
Pretty scary indeed!
It might not be a coincidence that you experienced both: grey transition when switching on the screen and once, the grey screen of death after a call...
Two different effects of the same defective part in your H/W?
a solution!, almost
untill now i've had auto brightness control switched off and the brightness was set to minimum to save battery life, but now i just tried switching on auto adjust backlight and the problem seems to have vanished.....coming out of standby is smooth as ever!
although i've to say that i don't quite understand the logic behind it.
*EDIT*
it doesn't help for long
blufade said:
a solution!, almost
*EDIT*
it doesn't help for long
Click to expand...
Click to collapse
This is what I was worrying about...
Your method sounded like a work around to avoid the display failure. But as a matter of fact, there must be a reason for the display to fail. (bad screen, power supply or something...)
By the way, I'm more and more convinced about my assumption that there are bad production series and better ones:
Today I had my device connected to my PC through USB for a couple of hours. In the meantime, I was downloading and deleting messages, watching google video on opera, after that I used wifi etc.
In this situation, my first Diamond would have got hot like hell and my hand could barely stand the pain...
Since many people were complaining about over-heat problems, I thought that was a common problem with Diamond.
But the new one did not get that hot. Just a little over-warmed, but definitely not too hot. From that phenomenon, I can see what I felt about a better touch-flow behaviour, a better GPS and so on is a part of a whole:
I was first sold a ****ty phone, and now I finally got a proper Diamond!
People with bad series, you don't have to cope with all those troubles, ask for a replacement phone!
my diamond gets heated up quite a bit at times....but i dont fully uderstand what exactly is the cause.....i've had experiences with the diamond getting pretty hot while using wifi & or gps and on another occasion i was watching a DVDRIP via wifi(@ full power) using core player and also with gps cycle running in the backgroud, still the diamond stayed well within reasonable limits.
i think it has to be a software problem, possibly the radio s/w
would you mind sharing the radio version of your diamond?
As written in my signature, I'm using the 1.00.25 which is included in all latest official ROMs.
By the way, I hope you did not cast a spell on me! (just kidding)
Today I experienced my first grey screen!!!
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Just for one second, looking like an old black and white TV screen trying to tune on channels.
Hope that was the first and last time. In ordinary calls, (without being synchronized to the PC at the same time, it never happened so far...
sorry to hear that my friend
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Click to expand...
Click to collapse
I'd the same experience except for the fact that my diamond wasn't connected to a PC.
I hard reseted my diamond yesterday, but the grey splash while i turn on the display from standby(post 3) still exists ( ......i don't suppose its a software problem anymore.
blufade said:
i don't suppose its a software problem anymore.
Click to expand...
Click to collapse
Why not trying to send it back to the seller and get a new one?
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
Click to expand...
Click to collapse
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
blufade said:
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
Click to expand...
Click to collapse
You can stay there and wait for 5 more minutes in the shop while they are attending other customers, just to proove your point.
If they are honest, they will not deny the fact!
foxium said:
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
Click to expand...
Click to collapse
knave said:
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
Click to expand...
Click to collapse
There might be some tweaks in the cooked ROMs that avoid the problem, or it might be due to some bad flashing or defective hardware.
If not, how do you explain that I've never experienced this with my previous HTC phones (wizard, Trinity...) nor I experienced it with my Diamonds (the first one and the new one) with stock or cooked ROMs.
except for that very special time, when I received a call while downloading messages through Active Sync.

Strange problem, TD locked with black or VERY strange screen...

Since a week or so I've had some minor problems with my Diamond.
First after a couple of hours with no use, I saw the led blinking (hey, a new text messag, let's have a look) and the phone wouldn't wake up.
Even pressing the power button for a long time didn't make a difference, I resorted to taking out the battery and restarting it that way.
Everything was back to normal after turning it back on so I didn't really worry about it.
Until this weekend, I tried to wake it up from standby and the screen looked euhm... rather strange
I made a picture of it (please have a look at the attachment). In this state it didn't respond to any button, not even a long press of the power button.
While I was putting back my camera this screen disappeared and the normal touchflo was back, but still the device didn't respond to anything.
So again I resorted to removing the battery and everything has been fine eversince...
But now I'm a bit worried... Anyone have any idea what might be causing this? I must say it's been quite warm in my house the last week (about 27C) so I can imagine that temperature could have an effect...
Thanks for any suggestions.
Oh, I almost forgot..
It's a stock Dutch Diamond.
The latest ROM (2.03.404.3 NLD)
Radio 2.09.25.23
Protocol 52.51.25.26H
That's a cool screen saver!
defaria said:
That's a cool screen saver!
Click to expand...
Click to collapse
It sure is
My first thought was: Oeh! Capture it!!
But I couldn't start the screencap program because well... the screen didn't really work
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
I'm curious about the reason, any ideas?
JavierV said:
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
Click to expand...
Click to collapse
Has your Diamond been functioning normally after that? Or has it developed more problems (and has perhaps been repaired)?
I'm a bit worried that this is the beginning of major problems...

Categories

Resources