Hi there,
I need help on how to modify the Phone dialer settings to the following problem:
While using a callthrough option of my company phone system, i dial into a special number, then after getting a signal, need to dial ** (2x the DTMF for "*") and the short dial code.
This worked flawless with my Hermes. But using the Diamond, i only get 1 "*", each next press creates "+", "p" and again "*", but without sending out the DTMF tone.
Is there any way to tweak the dialer to enable multiple "*" DTMF sends?
BTW, with the "#" key, there is no changing, but i definetely need the "*" key to work.
Anyone offer a solution pls?
Thank you
------------------
HTC TD running AZTOR V7 GER
HTC HERMES running XHamster GER
Related
Hi,
I'm experiencing some problem with phone module.
Problem is as the follow:
When I push the green buttuon (on the left side) no dial pad appears
When I push phone icon on start menu no dial pad appears
when I push on phone icon of phonealarm, list of missed call appears
I can receive phone call and I can perform phone call from contact list or from missed call list but I do not have any dialpad menu (i.e. no speakerphone activable etc).
I've tryed with various dialpad but the problem persist is not a problem of dialpad.
I use WM5 original ROM with GPS active.
Is it possible to re install phone module?
Could some one post the cab
As you may understand this bug is very frustrating, I have a wonderful device but it is not able to do the basic function required to a phone: dial a number and start a conversation
thank you very much for your help
regards
j
Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Keep keypad when calling . . .
majek5 said:
Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Click to expand...
Click to collapse
Excellent first question!
I don't know the answer, but I'd like to know, too.
Obviously you can hit the left softkey for "Keypad" but that's an extra step that one might prefer not to have to do, but rather have the keypad remain showing, and have the left softkey option be "Call Status"
If you call a lot of numbers where you have to enter more numbers when prompted, this might be the preferred default.
No one knows? I'd love to change this as well.
This is the first "fix" i need to do.
HTC should sort this out and provide a fee down load. They are silly to think it would not be a problem .
There is a fix etc.. but its part of a big bundle of stuff that scares most "newbies" away.
Can someone not make a simple fix just for this problem with a very easy method to download and set up etc
I am sure that many members do not have the technical minds of most of you!
Need some help or advise on a missing feature on 6.1 standard smart dialer that existed on 6.0.
On 6.0 once you search for a contact using the smart dialer if you press down the on the d-pad it will not dial the contact but will open up the contact so you can email or txt pretty quickly. That was way faster than opening up contacts and searching for someone. If you wanted to call just had to press the SEND button.
But on 6.1 when you press the d-pad down it simply dials and the only way to txt is to touch and hold on the search result and even then it will only allow you to text but not email.
I was wondering whether there's a reg hack to get this feature enabled on the new 6.1 smart dialer.
just d-pad down to the contact and d-pad right until u see txt
Thanks for the quick reply but D-Pad left or right will only cycle through the numbers nothing else
hmm are u sure...i'm not doubting just tryin to help
but for me lets say i have a mobile and home number for a contact i just highlight it and on the right it shows m for mobile..i d-pad right to h for home and again to txt if i wanna text the contact
I know you are and thank you
I am quite confused now because I had the same feature (D-Pad right to text and hold down to open contact) on 6.0 are you also using 6.1 and the same dialer build?
i'm using winmo 6.1 i'm trying to find out what build i'm using
Same problem here. With WM6.0 you only have to press the d-pad to open the contact. Once you opened, i got the chance to send sms, send e-mail or make a call. With WM6.1 this ist missing! I think this is probably only a value i have to change in the registry, but where?
If you use the original WM6.1 dialer instead of the Touch dialer it will do exactly what you are looking for.
For some reason when I press the down on my d-pad with the Touch dialer it opens up the last call list, and does not scroll through the contacts list.
I see your in CA so video dial is not really a possibility anyways. If you have KaiserTweak or Shap's Advance Config, set your dialer skin to the WM6.1 dialer instead and see if this fixes your problem.
I flashed the original HTC WM6.1 Rom, and yes, the original WM6.1 Dialer works how i want. But this doesn't look really great, does it?
I am now using DxC dialer with smart dial patch and is working great. Only thing missing is the smart dial in landscape mode. This one is way faster but still miss the HTC dialer :-(
It is only a little vaue in the registry, can't nobody help?
Nobody out there who can solve this problem ?
Perhaps somebody can upload the smart dialer exe file from the oroginal WM6.0 Rom? I would be glad, thx !!
Can please, somebody with WM6.0, look up in his registry an tell me the value's for Smart Dialer ? So i can compare the two version with each other. THX
Push,
something new?
I got the official WM6.1 download from O2 and everything works fine,...except the dialler.
When I try and dial a shortcode it just picks the closest number and dials that number. E.g. if I try and dial 322 <send> it dials the full number of the first corresponding contact instead.
Aaaaaaaaagh!
Any ideas ?
Try turning off smart dialing options.
Thanks, but...
I like Smart Dial, it's just that the behaviour has chanegd in WM6.1 (Grr!)
I have 'solved' the issue by adding a contact (*<shortcode>) so that that appears first in list.
That'll have to do for now, but it's not a long term solution.
Cheers, DBo.
Hi,
I have the diamond for about a month now and love it. Only one problem: If I want to access my voice mail at work, I need to double press th * button when my message starts...But it does not work. The first time I press it, it works, but the second tap displays a "p" and no sound...If you go in the dialer, even without being in a call, and try to double press *, it happens too.
Any help ?
Thanks
Steph.
no one ?
really ? No one ?
Steph
I had problems paging people thru hospital paging system where you have to keep dialing numbers. Try changing form short DTMF tones to long DTMF tones. It has worked since I did that.