Hi,
I'm using mainly 6.1 ROMs and I use bluetooth a lot. I have a car cd player to receive calls and to receive streaming from an BT device. I also have a BT GPS receiver.
I also have a BT-enabled laptop. I use serial port to synchronize my BA using active sync.
I know there is some problems with BT stack, but my question is specific : Why am I able to use Serial port with my PC, but not with my GPS ?
I always got "invalid password" when I tried.
Any idea ?
thx
mik-
Related
Hi all,
i recently upgraded my qtek 9090 to 1.42 (Tmobile posted BA_TMNL_14200_115_11300_Ship). I have major problems connecting to my handsfree set in my car. The first try to connect is successfull. I can pair with the handsfree device, enter the security code and everything is fine. The device appears in bluetooth manager under paired devices.
After disonnecting the paired devices rapidly gets lost. After that, theres no chance to connect to the device again. The only chance is to delete the bluetooth device in the manager and pair it again.
Despite to this, if have no problems with my gps mouse. Security is disabled, the device also don't appears in paired devices
Has anyone an idea ?
BT Version is 1.0.0 3900
I think I found the problem. Seems, that my handsfree set in my car still had the connect information of the former installation and I still use the same name for bluetooth. The handsfree set can save the connect information of 3 devices and two of them had now the same name but different id's. Seems, that was the problem. I'll test it for some days, but I'm sure, that was the solution
have fun
BT headset is paired but gets lost
my MDAIII has just been updated to the latest Tmobile upgrade.
Everything works ok. BT headset pairs and when i make a call i can speak. But when i receive a call the connection with the headset has a '?'
Now i first have to search to get a connection.
It's like it switches off the BT Headset connection when I receive a call.
Does anyone know how to solve this?
HI THERE
CAN SOMEONE PLEASE HELP, I HAVE TRIED TO CONNECT MY BLUETOOTH TO MY GPS AND CAN NOT GET IT TO WORK AND I HAVE TRIED TO GET ACTIVESYNC TO WORK THROUGH BLUETOOTH AND CAN NOT GET IT TO WORK. CAN SOMEONE TELL ME IF THERE IS A PROBLEM WITH THE XDA MINI S BLUETOOTH AND HOW I CAN FIX IT PLEASE.
1) dont type IN CAPS its annoying as hell to read
2) IMO the bluetooth on the Wizard is a bit flakey sometimes, remove any partnerships you have setup.
Soft reset
Put your GPS in discoverable mode
Use the wizard to scan for bluetooth devices (not in tomtom or any navigation app)
Pair with the GPS if found
3) Make the Wizard discoverable
Use the PC to scan for BT devices, does it see the wizard?
Use the wizard to scan, does it see the pc?
If you can pair with the PC then you need to allow the connection etc, then use the wizard to open active sync, connect via bluetooth, sync
If this works, and the GPS pairs but you are trying to use it with tomtom 5.x you need to add a "new outgoing port" and assign it to the bluetooth GPS, then set the GPS device (in TTN etc) to use that port.
I have a nagging problem where if I am on a voice call using my BT headset and my external GPS wants to get a traffic update via it's BT connection to my phone it will grab the BT connection from my headset and I loose the call.
I have seen some mention that a BT access point can handle multiple BT requests at the same time. It struck me that maybe there is already a software solution for this for WM6 devices.
Does anyone know of an existing product for WM6 that would solve my problem?
Can not connect Bluetooth please help...
--------------------------------------------------------------------------------
I have tried to connect my qtek 2020i through bluetooth with my carradio. It is a blaupunkt casablanca MP57 with a bluetooth interface audio device.
When I search for device it finds the radio, next the security code is asked, I enter it, next it is paired. I have checked the "Hands free" option.
On the display of the audio device on the qtek, I can see the radio but I can not use it . When I try to make a call it says "Connection Failed".
When I use a a bluetooth headset it is working ok,
Is there a bluetooth update for an qtek 2020i?
Does somebody know the solution....
Many Many Thanx!!!
blaupunkt hamburg mp68 bluetooth problems with xda 2i
hi all,
a week ago i bought a new car radio, blaupunkt hamburg mp68. i have some difficulties, to connect it with a xda 2i. the xda can recognize the radio, but it's not connecting. does anyone have any ideas? blaupunkt bluetooth connection perfectly works with a nokia e50, and a nokia 6310i (that's a surprise!), so i don't understand the situation at all. previously my xda was connected with a bluetooth headset, a gps reciever, other phones, and my laptop, and it all worked fine (and still works fine). should i search for some kind of update for my xda? what are you recommend?
thanks for your help!
vic
Hi mates
I`m using HTC Touch Pro, branded by T-Mobile germany (mda vario 4) with EnergyROM Photon (build 21864). I have a build-in bluetooth device in my car (original bmw e90). Usually I can connect my phone with BT system in the car and use it, now i got a headset Planctronics Discovery 925. I tried to establish the connection via BT in the car, HTC Touch Pro and Planctonics Headset, all 3 dev. in the same time, but dont know how. Is it possable? Cuz i want to make the conversation private and public. Private via Planctonics Headset and publice via BT System in the car.
Please HELP!!!
your BMW's bluetooth connects automatically to your phone , the only way to make it connect to your bluetooth headset is disconnecting the phone thru the voice menu of the BMW, then choose the headset on the phone's bluetooth menu
i have a mazda 3 2010 and it does the same thing.
THX for your answer. Well this means there is no way to connect 2 devices to my htc phone at the same time? . According to wiki link KLICK, the master BT device can communicate up to 7 devices.