now i have the orignal rom for htc p4350 but i cant but it becose i cant get my phone open and connect with activ sync what can i do plese help
Related
Ive downloaded official wm6 sve rom from HTC website. My herlald is stuck on bootloader ipl 1.08 spl 1.08. When i connect to computer usb is shown on the screen bottom ,but when i try to flash the rom ,error 300 invalid update tool is shown.
how can i fix this??
Official rom matching my p4350 is supposed to work,but it doesnt.
please help!!!
Hi there,
I recently had a similar problem as you, what I did was to:
- remove the battery for 5-10secs
- put the battery back
- press and hold the camera button (do not release it)
- press the power on button ( the one at the top of the phone, used for the soft resets)
- The phone will display three different colors and "IPL ...."
- Connect your phone via the USB cable to the computer, Windows XP detects that as a new hardware and installs the USB drivers for it. Pockect PC ...., just accept the driver installation when it warns you that the driver is not signed.
- Past all of that you should now be ready to use the Official ROM file from HTC, run the file, and go through the steps. It should start the ROM upgrade.
Well I hope it helps you as these steps did bring my phone back after a failed ROM upgrade.
Cheers
thanks for your instructions .
i will try and post results
Is your phone CID locked?
Because if so, you have to go to your phone provider and see if they have their own official rom!
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
elizag said:
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
Click to expand...
Click to collapse
Yes same i also have same problem i get Norway rom from my serial number but giving me invalid update tool
my phone
ipl 1.08.00001
spl 1.08.00001
please help me in that case
thanks in advance
i asked the costumer,the herald was cid unlocked when he bougt it,he flashed succesfully pdaviet ,then he wanted to flash wm6 but after uspl the p435o went into bootloader mode,ive been trying with many flashes with no result,please help!!
I had the same problem, and i did the download again. and it worked. try to download the upgrade again and dont forget to take of the memory card of the device.
I hope this can help you.
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
shankyo said:
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
Click to expand...
Click to collapse
i have the same problem.somehow my p3600 radio is deleted.and now when i power on. it says NO GSM in start and then stuck on windows mobile 6.1 logo .
i installed new roms without Radio again stuck on start up logo.
whenever i installs radio rom it stucks on 13%.
i tried sdcard meathed it stucks on Gsm(Radio).
SO THE PROBLEM IS RADIO
i have original htc p4350 wm6 update and i have htc p3600,can i update my htc with this rom?
if i can do that who i can do that?
(and i have and the greek language for wm6 original again)
i install activesync and the htc p3600 have connected.
i tried to do it but when i run the setuo it tell's me :
//////////////////////////////////////////////////////////////////////////////////
ERROR 202 : CONNECTION
The Update Utility cannot connect to your PDA Phone.Please check that
your USB cradle/cable is connected properly between the PC and your
PDA Phone.
Check the following:
1. The PDA Phone is connected to the USB cradle/cable
2. The USB cradle/cable is connected to the PC.
//////////////////////////////////////////////////////////////////////////////////
Thnx and i hope to have a solution to my little problem.
cu
plz send me original htc p4350 wm6 updare file
I have wm6.5 on my p3600 and want to put some of 6.1.
when i do hard reset, (then i see 3colour screen and spl 1.20Olipro), and then start ROMUpdateUtility.exe from my PC, it doesnt start (error 260: connection problem)
so help me, how can I bring back some of WM6.1?
Uncheck USB connection in Windows mobile dev center -> conn. options. Because it is using Windows driver , we need to use HTC sync