I lost my Qtek 9100 original installation cd.and i reinstall window xp on my computer.now i can connect my qtek9100 to my computer.everytime i connect usb ,askind for cd.if someone can help me.
You probably need Activesync
Hi I know this is abit off topic but is there anybody who can help me with my dopod 838 or HTC Wizard? The pda side of the unit is working great but the connectivity is no working. The phone feature is not working(e.g. can not find any network signal on different providers ) the IR, Wifi, Bluetooth and the GPRS is not working. Worst i can not re flash it becasue the computer only says "Unknown Device" when i connect it via USB. I am using activesync 4.5 on windows xp. It would be a great deal if anyone could help. thank you.
the details are as follows :
ipl : 2.21
spl : 2.21
gsm : 02.19.11
os : 2.21.13.1
Try to upgrade Radio ROM with Wizard connected in Bootloader mode (Camera + reset)
I have tried to install the firmware update to my SPV M2000 from the Orange web site, it now displays a white screen with USB at the top and v2.07 at the bottom when docked in the usb cradle. It displays serial when undocked. The device is recognised when attached via the usb so it is communicating with the laptop. I have tried several times to continue the update - RUU_V2.5_ORANGEUK_V5.40.1.179_SHIP and it always stops on error 101 not communicating with PC. If I use MAUpgrade_noID then I get ROM Upgrade utility error, not designed for your device. I am able to synchronise another SPV M2000 using the same cradle and laptop with no problem comunicating.
I have tried to download an image from clubmate but cannot register as I do not have an Imate device. Any advice or pointers gratefully received.
I think you just tried to flash ROM that is for differetnt device: There was no (and there will ne no) official WM5 ROM for BlueAngel. Experiments with MAUpgrade_noID were very dangerous. But if device still shows Serial/USB, you might be able to repair the damage.
Download any normal, proper ROM for BlueAngel and flash it. but it must be for BlueAngel, not for other deivces. Information on WM5 flashing procedure and links to ROMs you can find on Wiki. There is WM6 also available for BA.
Ive downloaded official wm6 sve rom from HTC website. My herlald is stuck on bootloader ipl 1.08 spl 1.08. When i connect to computer usb is shown on the screen bottom ,but when i try to flash the rom ,error 300 invalid update tool is shown.
how can i fix this??
Official rom matching my p4350 is supposed to work,but it doesnt.
please help!!!
Hi there,
I recently had a similar problem as you, what I did was to:
- remove the battery for 5-10secs
- put the battery back
- press and hold the camera button (do not release it)
- press the power on button ( the one at the top of the phone, used for the soft resets)
- The phone will display three different colors and "IPL ...."
- Connect your phone via the USB cable to the computer, Windows XP detects that as a new hardware and installs the USB drivers for it. Pockect PC ...., just accept the driver installation when it warns you that the driver is not signed.
- Past all of that you should now be ready to use the Official ROM file from HTC, run the file, and go through the steps. It should start the ROM upgrade.
Well I hope it helps you as these steps did bring my phone back after a failed ROM upgrade.
Cheers
thanks for your instructions .
i will try and post results
Is your phone CID locked?
Because if so, you have to go to your phone provider and see if they have their own official rom!
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
elizag said:
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
Click to expand...
Click to collapse
Yes same i also have same problem i get Norway rom from my serial number but giving me invalid update tool
my phone
ipl 1.08.00001
spl 1.08.00001
please help me in that case
thanks in advance
i asked the costumer,the herald was cid unlocked when he bougt it,he flashed succesfully pdaviet ,then he wanted to flash wm6 but after uspl the p435o went into bootloader mode,ive been trying with many flashes with no result,please help!!
I had the same problem, and i did the download again. and it worked. try to download the upgrade again and dont forget to take of the memory card of the device.
I hope this can help you.
My HTC TD2 was unlocked CID to V1.83 Olinex and was upped a few roms by PC. Suddenly, I couldnt up a new rom by PC. When running the RUU, the error message displayed : "The Update Utility can not connect to your PDA phone. Please check your USB cradle/cable....".
I tried to change the sync cable, PC, installed the NetCF 3.5 on PC, but they were useless. But I upped Rom by storage Card successfully.
Anyway, I still want to up a new rom in the future by PC and I wonder if my PPC has some error in hardware or not.
Pls help me!