So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
kernelguy said:
I then remembered the post from equinoxe that had registry settings for his phone. I took those settings and updated my registry. I now have a decent touch screen - at least the top 3/4 works fine.
The key and settings are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
kernelguy
Click to expand...
Click to collapse
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.
thank you very much, this is exactly what I needed, my touch screen is busted
Thanx
OH MY GOD!!! THANK YOU SOOOOO MUCH!!! nothing else worked but this did! you are a life saver!!!!!
es al gud..thank u
an error occured while performing the operation
this is the error I am getting while performing the steps as you suggested buddy..
I don't know whats wrong but my wizard is giving hard time trouble in alignment.
please help
Thanks in advance
it say "the device couldnot found" sth like this sentence but it align my ppc and when it goes into windows mobile when i press anywhere of touchpad it just open start botton
my pocket pc is eten m600 and it`s touchpad broke 1 years ago and i replace with imate jamin touch pad
plz help me
Thanks alot dude it worked
mz4u said:
this is the error I am getting while performing the steps as you suggested buddy..
I don't know whats wrong but my wizard is giving hard time trouble in alignment.
please help
Thanks in advance
Click to expand...
Click to collapse
Did you make sure that your device was connected through activesync before? It has to be connected and NOT as Guest meaning you have to run through the setup activesync does when you first connect a device, for this to work effectively. Also if you're running vista I can't 100% guarantee this will work for you since vista uses Windows Mobile device center and not ActiveSync. If it does then feel free to update this thread.
alihaddadi said:
it say "the device couldnot found" sth like this sentence but it align my ppc and when it goes into windows mobile when i press anywhere of touchpad it just open start botton
my pocket pc is eten m600 and it`s touchpad broke 1 years ago and i replace with imate jamin touch pad
plz help me
Click to expand...
Click to collapse
Again refer to what I mentioned above about it being connected by USB and recognized by activesync.
If not LMK I'll try to help as best I can.
Hello,
I have tried using with "1922,1957 3330,639 3317,3276 600,3230 609,677 " and actually skipped with screen alignment but alignment is not right....bottom part is not accessible...!!! any other correct alignment setting for T-Mobile MDA III....Please Help.
Thanks in Advance.
thx br,,
i solved my align screen problem in kais130,
working 100%
screen alignment.
hey I followed the steps to skip the screen alignment after doing a hard reset and i was able to turn my phone on successfully. However, my touch screen isn't working , i saw you mentioned that after doing a soft reset/hard reset the fone gets calibrated. My phone's screen didnt get calibrated. I tried to do screen align by going into settings but I wasn't able to do it that way either. it keeps tapping the target but it doesn't align the screen. Any idea what my problem could be? I thought that after doing a hard reset, it will resolve the problem. but it hasn't done so. I am out of solutions and I need some help.
I would appreciate if you can reply here or email me the solution at [email protected]
thanks
Greate!
Thanks!
duuude
you are the man!! had been trying all sorts of stuff nothing else worked !!
Excelent!!
Worked excelent, i had an 8125 with touch damaged, but with this i skipped the hardreset issue
thanks thanks thanks
corollatercel said:
So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.
Click to expand...
Click to collapse
Thank you very much!!!!!!!!! thats amazing, you save me from the big F*** with scrren aligment, it perfect works on my omnia damn i love tou
Got a broken LCD, and bought a replacement...
No luck for me... mine is a XDA II Unit...
Or there is another calibration settings for this unit...
Or worst... i bought a non working replacement...
THANK YOU!!!
Thank you so much this worked great on my omnia.
I thought I would be stuck trying to allign the screen until my phone contract ran out!!
omniaconfused said:
Thank you so much this worked great on my omnia.
I thought I would be stuck trying to allign the screen until my phone contract ran out!!
Click to expand...
Click to collapse
Did you have any issues running the program man? For some reason, the program tells me there is an error, to re install it... Ive done it 4 times already, no luck in getting it running. My stupid omina is still stuck on the alignment screen after samsung told me to hard reset it.. GRRR
I just want to say :You save me!You are the god!
I can't express my thanks anymore!Your method help me to acess the operate system when i have a hard reset and can't get over the screen alignment!Soooo you are the life saver!
Hello..
I've got a sirious problem... I can't tocuh in my password in the startup of the diamond. I've reseted it and still it's not working
I have Duttys Diamond WWE_5.2.20273_Rom Release V1.5. Anyone that have the same problem or that can help me out? Would be greatful.
Perhaps your phone is locked. Had the same problem - phone was locked and i coudn't do any input on touchscreen.
Try to soft reset your phone. Then after boot - short before you have to input your pin you will see "unlock" in the bottom left corner of the screen. But this message will only appear for a very short time.
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
Few hours ago i unlock my phone, there was a problem with radio rom, and my friend recommend to install Kaiser HyperDragon III_WWE version of WM6.1.
I install it, play 5-6 minutes and after this check some delay problem. I make soft restart and after this phone touch screen don't work.
Touch don't response. Made hard restart ... and it's the last think that i did.
At startup i check this "tap the screen to setup your windows devices ....", but as touch screen don't response .. i don't have any progress.
Try to resintall the same WIN6.1 version, but no changes.
Any advice? what's the problem.
Is there any way to fix it ?
sounds like a hardware problem. Most likely the wiring is bad or corroded. You'll need a new screen or you might be able to fix the wiring. I kind've don't like the fact that our kaisers vibrate at startup because you think it would eventually rattle something loose which may have happened in your case. Before getting a new screen though, load a new ROM. To do it without activesync enter the bootloader mode by pressing down the camera and power button at the same time while the phone is off. Then connect your phone and it should say USB after a few minutes. Then flash
http://forum.xda-developers.com/showthread.php?t=485288
Please Read This Thread...
Because I had almost same problem like your's...
Try the install HardSPL...
Hi everybody,
due to warranty reasons (crack in case, display and buttons in the front panel stopped working and the problems with the hardware keyboard) I need to flash the original SPL back and get rid of olinex. I already flashed the Original ROM, but with the SPL I failed since I can't see the screen or use the front buttons.
After flashing the original ROM I was able to get a connection from my pc to the X1 via Pocket Controller and also I got a USB connection. A real Activesync connection was not (yet?) established. With Pocket Controller I get to the point where I have to initialize the touch screen and tap on the x at the different locations. The emulation with pocket controller doesn't work here and as I said, the screen itself is dark and not working.
Does anybody have an idea how I get the original SPL back on my diamond with the above described setting??
Thanks in advance!! Help is very appreciated since I have to decide to brick the device or try somehow to get a warranty repair...
Regards,
Stefan
No ideas? Anybody?
I would like to know if it is possible at all to flash the SPL without screen?
Please, I need to decide to get my device back for money or brick it until this weekend.
Help would be appreciated! Thanks!
Sincerely,
Stefan
Probably posted in the wrong folder?
You get stock at Screen Alignment?
The Last Roms of Valkyrie (Leo) I flashed did not require a screen Alignment. It just went to Customisation.
Then you may get an AS connection. Accept the SPL by pressing the hardware key .
I hope it helps.
If it doesnt work you should ask in general dev and hacking forum.
Turn off the mobile and remove the batery. Put it back and press (power) and (Vol down) for min 10 sec.
Push the powerbutten for a second.
Connect the mobile with USB and try to reflash SLP.
It worked for me!!