Hi to all. i have one HTC HERALD 100 dead ( can only go on bootloader mode) when trying to flash it gets to 1 % and ends with error " INVALID VENDOR ID" . Please how to deal with that issue. thanks....
Related
could any one help me to solve my wizard problem ? when i started the ipl 2.26 , spl 2.26 , os , gsm ok , but turn to white screen , any one knows what wrong with my wizard , please help , and i try to copy image to sd card method , but it's seem a problem , details like below :
Cmd>r2sd all
***** user area size = 0x7AC00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
please help
thk's
rgds
Fendy
fendydj said:
could any one help me to solve my wizard problem ? when i started the ipl 2.26 , spl 2.26 , os , gsm ok , but turn to white screen , any one knows what wrong with my wizard , please help , and i try to copy image to sd card method , but it's seem a problem , details like below :
Cmd>r2sd all
***** user area size = 0x7AC00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
please help
rgds
Fendy
Click to expand...
Click to collapse
Your phone is CID locked (This is NOT the same as SIM locked.) You need to unlock it before you can flash a non approved carrier ROM that contains the CID that your phone is locked to.
The instructions to unlock are in the stickies. Everything you need to know to continue has been posted and tried and true many many times. Read some more.
thk's
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
u should read the rom upgrading wiki before doing any flashing
Jerrytmathew said:
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Click to expand...
Click to collapse
Did you save the box?
J/K, read the wiki...
?Glitch
Yes read the wiki, or else really bad things happen.
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Enchanter said:
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Click to expand...
Click to collapse
Here's a quote from the ReadMe inside the RUU Upgrade Utility:
-> ERROR [302~318] : UPDATE ERROR
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Have you upgraded to HardSPL?
Visit http://trinityguides.info for guidance.
pls help me man !
error 302 happend when i try to upgraded to HardSPL .
0% ..then suudenly error 302 like this ..
~>~ i dont know why
my first time with TRinity , ..but so so hard
Hello all ,
I have one tytn 2 , i try for flash but i cant , i dont have sim card in , i put the usb cable , the tri colors coming and i follow the step of (Kaiser unlocker) The problem during the update he stay on 0 % and write cant make the update because not found the device ...
how i can Remove the SFR code for turning in normal mode under sfr .. :s i cant go in the phone for make the update of the room , i stay always on the code (8 digit ) sfr or the botloader ...
help ... i have try all the soft when i have found :s
i cant input the SPL to the rom actualy is :
KAIS130
SPL-1.56.0000
CPLD-8
i cant update this , this is my problem , if i can update this , the rest is ok i think :s
Very thx for u futur help !!!
When i try for update the SPL i have :
(code error is )
The ROM update utility has encountered communication errors during the update process , The prgram will guide you bla bla bla
Error 262
....
You need to install Hard SPL. See here:http://forum.xda-developers.com/showthread.php?t=433835
and post any further problems in that thread.
Ta
Dave
dear bros. am using HTC gene. yesterday am thought to change my phone os to upgrade. and i do the olipro method . gene_hspl.exe into my phone memory and click to that file . then the pine was switch off . and am go to the orefkov method . but the last " ROM update utility " runs in my pc an error message display. "ERROR 200 " pls get newer update utility. pls help me . now my phone was switch off . pls help me.