UpGrade problems
--------------------------------------------------------------------------------
sorry to open a new thread for a probably rare issue , but my problem seems to be NOT related to a particular ROm.
I have my p3660 perfectly running with Mun 2.01 TE WWE WM6 ROM .
I tried many times to update to one of the new roms available in thiese days (both WWE and Italian ROMs )
everytime I'm blocked by the same problem during the upgrading procedure :
I try to describe what happen :
1) the device is connected to the PC with AS 4.5 and the sync is completed.
2) After having launched " romupgradeutility" , the sequence of three steps seems to be ok and I arrive to see the page where there is the bar graph starting a 0% and the recommendation " do not disconnect the device ..."
3) nothing happens for 10-15 seconds
4) A warning message referring to " error 202" arrive ; it seems that the device is not connected to the PC , but in reality the device IS connected and IS NOT in bootloader mode. The device is perfectly running as in any other normal sync session .
So , this stops the upgrade procedure
If I repeat the same from 1) , same result
In the past ( and the last !) rom upgrade , I remember I was forced to restart after the bootloader mode arrived into the device , but this is not the case.
I tried :
a) soft rest the device
b) restart PC
c) reinstall AS on the PC
4) change the cable ..
with out any result
( PC with XP )
Thanks in advance for any support/suggestion/help
Hi
I had exactly the same problem and I could solve it very fast:
- When you get the error message on the upgrade utility just close the utility
- Leave the Trinity connected to the PC and don't turn it off
- Restart the utility, check all boxes as usual and you will see after that the ROM upgrading.
It's a bit strange and I don't know why this happens, but the workaround as described worked on my Trinity.
Ciao
Jarivs
thnaks to jarvis , but..
I'm sorry , but I repeated many times the procedure exaclty as you describe , but I find always the same rusult
in your experienc e, was you device in bootloader status at the end of the first trial ?
mine is not and I do not want to force it in a different way..
Thanks again for any support
Maybe that's the difference. As soon as my Trinity was in bootloader status it has lost the connection (as stated in the utility) and as I told you I have restarted the utility, checked all boxes and after that the upgrade started.
Sorry, I can't say more then this. I have no clou what else you could try.
Cheers
Jarvis
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
Hello Guys,
I have updatet my PPC from Windows 2003 to Windows mobile 6.
Now i have downgradet to windows mobile 5 and my telephone (calls) dont work.
I i try to upgrade to another version (wm6) i get an error "Country-ID Error" on my PC and my Pocket PC goes off. If i take my PPC out of the Cradle, my pps returns in the Bootloader modus and "Seriell" have a red Background..
Please help me
There's a sticky thread in the "Himalaya upgrading" section of the forum that explains it:
http://forum.xda-developers.com/showthread.php?t=228852
Also you could download the ROM installer by C. Shekhar from
http://www.4shared.com/file/25643567/be7eb052/C_ShekharAKU70bR40P24_public.html
The read_this_first text file in the download gives steps for handling the error which might be easier to work with.
Hello,
HimeGetDevice... returns only:
U S B 3 2 3 . 5 0 c . 4 0 C S
what's to do?
Hey,
I have flashed this rom:
http://www.4shared.com/file/25643567...24_public.html
Now, my pps dont boot! I see the i-mate screen and nothing else... what to do???
try to flash using HIMAUPGRADEITNOID utility
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Enchanter said:
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Click to expand...
Click to collapse
Here's a quote from the ReadMe inside the RUU Upgrade Utility:
-> ERROR [302~318] : UPDATE ERROR
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Have you upgraded to HardSPL?
Visit http://trinityguides.info for guidance.
pls help me man !
error 302 happend when i try to upgraded to HardSPL .
0% ..then suudenly error 302 like this ..
~>~ i dont know why
my first time with TRinity , ..but so so hard
dear bros. am using HTC gene. yesterday am thought to change my phone os to upgrade. and i do the olipro method . gene_hspl.exe into my phone memory and click to that file . then the pine was switch off . and am go to the orefkov method . but the last " ROM update utility " runs in my pc an error message display. "ERROR 200 " pls get newer update utility. pls help me . now my phone was switch off . pls help me.