Related
pls help
I flashed wizard tmobile with jaf wm ,k jam(nk nbf) file after the phone hangs showing i mate ,ipl and spl is 1.03 what i have to please help.I dont have any idea abt this phone ,I know i have done foolishness pls help to solve my problem
thx in adv
mobilevoice said:
pls help
I flashed wizard tmobile with jaf wm ,k jam(nk nbf) file after the phone hangs showing i mate ,ipl and spl is 1.03 what i have to please help.I dont have any idea abt this phone ,I know i have done foolishness pls help to solve my problem
thx in adv
Click to expand...
Click to collapse
If you are SURE that your T-Mobile device is a WIZARD then download this file, run it, and follow the instructions.
http://www.t-mobileapps.com/downloadcenter/software_detail.cfm?id=80
thx for ur reply
I tried to update but this shows error(294)INVALID VENDER ID
this utility cannot be used for your pdaphone.Please check ur update Utility...
it shows this message
pls help
thx for ur replies
Invalid vendor ID indicates that the phone is not a T-Mobile Wizard. Please take a picture of the phone and upload. Thanks!
yes sir it is Tmobile mda
Sir
I have flashed it with k jam file after this problem start,before flashing i have used this phone [URL="http://www.tmphonedownloads.com/download_manager_mda_vario.html from this lik also i got t mobile file,but this updatr shows error after 95% flashing that nk nbf not supporting
thx for ur reply
Could you please check that URL? My DNS cannot resolve www.tmphonedownloads.com. It's and MDA Vario and not an MDA Vario II right?
me also cant open this url,yes it vario same k jam no change
thx
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
check this
So you have tried to flash with the file at http://www.tm-phonedownloads.com/download_manager_mda_vario.html and displays what error message?
You said at 95% there was an error message like nk.nbf not supported. Can you provide me with the exact error message please?
error 326 :INVALID COMMAND
This NBF file cannot be used for ur PDA phone .please check ur nbf file.
this message comes on 95%
thx
Can you please report the version of the ROM Update Utiliy you are using?
2.21.02.109 this ver is showing error on 95%..-
file is ruu_prodigy_2210206_22102109_021911_TMO_UK_WWE_SHIP
pls help
thx
Hi all PDA and HTC lovers.I have an ALPINE which is stuck on "windows mobile" screen. Thats because I was upgrading a new rom but during upgrade connection between my PDA and my PC was interrupted then I got many error messages on screen but it was too late now I cant get my ALPINE into bootloader mode and I only can see "windows mobile" screen when I plugged charger.Is it possible to make it run my alpine again. I would be very pleased if you could help.
Buzz..... it would be very good if you can help me coz I trust you so much you r the best
Please contact me [email protected]
Stuck on window mobile screen
I got similar problem on XDA Exec last week and fixed it. I do not know whether the steps will help on you XDA IIi or not.
I was upgrading the XDA Exec to a newer ROM version and keep getting country error code. Whatever I did caused the device to stuck on window mobile screen. I simply put the device into the cradle after reseting it. The screen still shown the window mobile image. I ran the ROM update program again (I think it is MaUpgradeUt_noID.exe). It showed an error but I ran it again withthout taking my device out of the cradle. It run sucessful the second time.
I notice that when the program runs, it close ActiveSync application from your desktop and the device screen turns to black screen with some simple texts on it.
I hope this help.
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
sidd said:
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
Click to expand...
Click to collapse
hi my fellow Siddiqui I couldnt solve that problem yet.And I tried to upgrade it again and couldnt manage to do that **** upgade please help me...Do I need to send it to HTC to Dubai? and I dont know how much does it cost ? can u please tell me if u know more about this topic?
Hi,
which Rom were you trying to install? what was the reason of getting the upgrade interupted/corrupted? I can upload the PUGs rom (as I am using it and its fantastic) if you want with the instructions.
Sidd
I was trying to upgrade to Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
rom but I couldnt. Can you please upload any other which will help me to save my alpine if possible....and I can try PUGs rom thnks so much
PM me your email address.
thansk so much sidd
Thanks so much my fellow Maarij I just downloaded files and I hope it will work Allah (c.c) bless you
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
please help me
I still cant find how to save my be loved alpine
Selcuk did you receive my email earlier this week??
Sidd
sorry
sorry Sidd I saw it right now coz I forgot check my mailbox actually my pc automatically downloaded it and marked as read thats why I couldnt notice your mail and I sent u back a reply
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
u should read the rom upgrading wiki before doing any flashing
Jerrytmathew said:
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Click to expand...
Click to collapse
Did you save the box?
J/K, read the wiki...
?Glitch
Yes read the wiki, or else really bad things happen.
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Enchanter said:
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Click to expand...
Click to collapse
Here's a quote from the ReadMe inside the RUU Upgrade Utility:
-> ERROR [302~318] : UPDATE ERROR
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Have you upgraded to HardSPL?
Visit http://trinityguides.info for guidance.
pls help me man !
error 302 happend when i try to upgraded to HardSPL .
0% ..then suudenly error 302 like this ..
~>~ i dont know why
my first time with TRinity , ..but so so hard
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!