Bluetooth: No Stereo - Tilt, TyTN II, MDA Vario III General

I just got a Camos BHS-600 stereo bluetooth headset for my motorcycle helmet. I successfully paired it with my tilt, but I'm only getting sound out of the left speaker. Both "headset" and "stereo music" are checked in the bluetooth profile. If I hold down the device selection and select "use stereo", it doesn't help. It happens regardless if I use windows media player, core player, or tcmp player. Is there a "fix" to get sound out of both speakers? I have an adapter that allows a 1/8" stereo plug connection to the tilt, and stereo works fine when I use that.
BTW, I'm using the original windows mobile 6.1 that came with the tilt.

I have a tilt with original rom and it sounds so crappy. I tried with the mini usb to 3,5mm stereo and with BCK 08 Bluetooth Headset.
I can listen to music in "stereo" with A2DPToggle
But the left channel sounds louder than the right one
Also the volume is not so loud, and if you set it louder it's very distorted.
Anybody can give me some advice how to improve the sound?
BTW I tried many players (Windows MPlayer, Core, S2Play) but it's all the same.

Related

Bluetooth headset for more than just the phone on BA???

Does anybody know how to config my Blue Angel to play mp3's through my plantronics 510???
Mike Braeuer
Which ROM are you using? Some of them have the capability, some don't... some can have it added, and some can't...
If you provide a little more info then someone will be able to help
Not possible, as far as I know.
The BA can handle it, your headset can't. You can install the A2DP bluetooth profile (needed to stream music via Bluetooth) on your device, but you would still need a (stereo) headset that supports A2DP.
Other than that, I doubt you'd get much pleasure listening to mono music through one ear on a little speaker that's built for cell phone conversations...
If you'd like to listen to music wirelessly, there's a number of bluetooth headsets that support A2DP, all of them stereo and not too expensive.

No music through bluetooth headphones

Hi,
I did a little bit of a search and followed most of the instructions. I just can't seem to get any audio player (Win Media, CorePlayer, Audio Manager) to play through my bt620s headphones. They work fine with my mac and all the controls work with my tilt. It's pretty frustrating. I've re-paired the phones and tried just selecting stereo headphones in the bluetooth settings panel.
I haven't installed the audio-switch cab yet.
T.I.A.
Noah
did you set as wireless stereo? In bluetooth settings hold down stylus on device name and select set as wireless stereo

Bluetooth A2DP one channel only

I have a Jabra BT620s A2DP headset and an AT&T Tilt with the stock ROM. The headset used to work great. Today I started it up, and all audio only comes through the left earphone, nothing comes through the right earphone. This includes system sounds, WMP, HTC Audiomanager, and TCPMP (haven't tried any other apps). I tried pairing the headphones with a different device and they work fine (sound through both ears). Does anyone know what the problem is?

BT headset / BT stereo headphones

I was wondering if WM6.1 (the HTC Touch Diamond) allows to connect a BT headset and BT stereo headphones in order to listen to music and answer calls.
I found a product from SE:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds205?cc=us&lc=en
That apparently would allow remote control of your audio player if this is supported. Does WMP mobile or any thrid-party mobile media player allow BT remote control?
Yes, it does. I'm using my JABRA BT320s with no problems whatsoever, and compared to the TOUCH CRUISE, I get far fewer drops. Just be sure to disable Joint Stereo with advanced config, to boost the quality.
And yes, WMP supports bluetooth remote control, and some new players too, like Pocket Music.
So forward/reverse, volume control works through the bt receiver?
Does the JABRA BT320 have a microphone so you can also answer calls?

A2DP problem using sony BLUETOOTH headset

Morning All !!
Currently i have the HTC fuze (AT&T) aka Diamond. I just purchase the sony bluetooth headset DR-BT160AS. I have tried everyway possible i can think of to get more sound out of these headphones. It sound like im listening to music threw a bottle next door in MONO. I tryed adjusting the preset ( audio booster) with the help of tweaksdiamond. Nothing but here the knock why is it when i have the audio adapter plug into the phone i can get great sound and adjust the presets, But threw the bluetooth i get mono sound with no adjustments. Its pairs wirless headset, hands free, it work the fucntions of changing the track and adjusting volume and i can recive calls.... but with poor sound.
programs used :
blue audio
tweaksdiamond
Has anyone had this issue using wirless bluetooth stereo headsets w/a2dp enabled.
@LPHAR56 -aka- do you hear me now "HELL NO!"
I have a pair of Sony DR-BT140Q and they work/sound really great every time. They're not the same kind, but maybe yours are defective?
Try pairing it with a laptop or any other device to see if you get the same results
thanks i try to do it with a laptop. if i can see if it just my pair having issues.. just can figure out the issue

Categories

Resources