Related
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
Is there a cab for Kaiser that will install a plain radio on your phone? AM/FM? Lots of Sony comes with one...
better yet is there a cab that will install a projector onto my tilt?
no even better. is there a .cab that will tuen my tilt into a iphone?
I'm looking for a registry tweak that will turn mine into a personal watercraft.
There have been several discussions on this, which you should have seen when you did your search. Even a well respected poster tried, even though he knew there wasn't a fm radio chip it the unit.
you guys are i luck, i just found a cab that will turn your phone into a watercraft with a am/fm radio. here it is readthedamnwiki.cab
KD8DNS said:
you guys are i luck, i just found a cab that will turn your phone into a watercraft with a am/fm radio. here it is readthedamnwiki.cab
Click to expand...
Click to collapse
Now that is funny!!!
/chuckle /chuckles again
I think this is my favorite thread.
has anyone else noticed that the 3G doesn't work in watercraft mode?
I think I have a solution for that. If you activate your Good Puddle Skipper (GPS) before you activate your Watercraft Mode, then 3G works fine.
Thanks that worked just fine.
The replies are quite funny however the ego is hurt. Been around for a few months but I don't remember seeing a tread asking that. I searched on google and seen nothing so I had to ask.
Closest thing to a radio that I found was Resco Radio which is an interface that helps you connect and manage favorite internet radio feeds. Hope that helps some.
If you care for the details, here are the main two I followed:
http://forum.xda-developers.com/showthread.php?t=358513&highlight=Kaiser+Radio
http://forum.xda-developers.com/showthread.php?t=338238&highlight=Kaiser+Radio
Ta
Dave
Serrious help needed!!!!!!!!
Hey, since you helped with the Watercraftw-AM/FM.cab, I was hoping you'd help me as well! You see I live near Los Angeles & traffic is hell. Do you think you could point me to a cab that would turn my TYTNII into a car pool dummy so I can use the HOV lane?
Or better yet....A cab that would make it into an inflatable doll? That way I get car pool lane & a companion for those lonely nights!
On second thought, nevermind. Sticky buttons & all that.
GSLEON3 said:
Hey, since you helped with the Watercraftw-AM/FM.cab, I was hoping you'd help me as well! You see I live near Los Angeles & traffic is hell. Do you think you could point me to a cab that would turn my TYTNII into a car pool dummy so I can use the HOV lane?
Or better yet....A cab that would make it into an inflatable doll? That way I get car pool lane & a companion for those lonely nights!
On second thought, nevermind. Sticky buttons & all that.
Click to expand...
Click to collapse
I'm sure Dutty has a cab for both of those.
i would lOVE the inflatable doll...someone make a cab! or make a new rom with that integratedddd
Is it possible to use the touchflow cube of one kaiser, to turn another kaiser into a decepticon transformer ?
here are some cabs im working on
hovercraft_2.4.33.909.cab (makes your tilt a hovercraft)
magical_iphone_version_3.0.cab (turns the tilt into junk "iphone")
Readthedamnwiki.cab (self explanitory)
how_to_make_tilt_transform_into_iphone_version_iphonesux.cab
teachmehowtodoanythingwithoutreading.cab (lazy ass cab)
ChumleyEX said:
I think this is my favorite thread.
has anyone else noticed that the 3G doesn't work in watercraft mode?
Click to expand...
Click to collapse
yea, it really pissed me off too. edge sucks on a watercraft.
ChumleyEX said:
I think this is my favorite thread.
has anyone else noticed that the 3G doesn't work in watercraft mode?
Click to expand...
Click to collapse
Actually you are wrong. It does have the ability to do this but HTC did not purchase the driver licence from Cutting Edge Technology giants Qualcast http://www.qualcast.co.uk/rotary/
Mike
I have version 4.57 and my message box where I type is messed up. I can't see what I type. I've attached a picture for example. I tried different versions but all is still the same. Is it my ROM? I have udKs 8.0..Duttys ROM worked fine but I changed to udK...I even tried hard resetting but still the same problem...anyone has this problem?
nothing comes close to IM+ ..only Agile is #1 i'd say... and Slick messenger doesnt have mobile buddys for AIM...
thanks!
No replies eh? Shame because I have the exact same problem.
contentryder said:
II even tried hard resetting but still the same problem...
thanks!
Click to expand...
Click to collapse
Well, if you DID hard reset and still have the same problem, then it must be your ROM. I don't have this kinda of issue so far.
BTW, 4.58 is released.
Nghiem, I tried 4.58 and I got the same results.
Anyway, I'm moving on to JiveTalk now.
It's the rom. Something with the OS is not meshing well with IM+. In my experience IM+ will only work with WM6.1 OS version 19170 and 19716 and older. There are also some hybrid roms that are based on 19716 where IM+ may work, but I personally have not tested them.
I currently use my own cleaned up version of 3.02 with 19170 OS and all my programs work great. Hope this helps.
I'm having this problem too... I've been using IM+ for quite a while with WM5 rom and it did ran smoothly without any problem. Just I upgraded to WM6.1 rom, I can't use IM+ anymore: everytime when I click on someone to open up the message box, the program just shuts down, I never can type any message to anyone
I hope there'll be a way to fix this problem soon coz' I like IM+ and don't wanna downgrade my machine!
try dutty's new 19700 build,works fine with that
The new version (currently in beta) might work better. Check their website to see if it's put up yet.
I'm using WM6 so far, so I haven't seen any problems, but those of you who are, can you turn on debugging/logging and send Shape Services the log files, if it creates some?
They're pretty good about helping, albeit they are sometimes a little slow to respond. I used IM+ on my Palm for quite a while and worked with them several times over bugs.
outphase said:
The new version (currently in beta) might work better. Check their website to see if it's put up yet.
Click to expand...
Click to collapse
this is known bug, i've reported it weeks ago... and there is a beta floating around that works perfectly... if you know how to use google then you can find what your looking for...
hint** search for implus_ppc_5-1.cab
I really want to use my IM+ on my HTC diamond!!! Anybody can help ?
oscarbb said:
I really want to use my IM+ on my HTC diamond!!! Anybody can help ?
Click to expand...
Click to collapse
You ask Shape Services yet?
I have two HTC Diamonds CDMA that I no longer use. I would like to put Linux on them and do something useful or cool. Do you guys have any suggestions of what I could use my old phones for?
garciaba79 said:
I have two HTC Diamonds CDMA that I no longer use. I would like to put Linux on them and do something useful or cool. Do you guys have any suggestions of what I could use my old phones for?
Click to expand...
Click to collapse
go to thread Android 2.0 (Eclair) for CDMA Diamond at http://forum.xda-developers.com/showthread.php?t=606760
I'm gonna try to use one for a remote control or mouse on my PC using Bluetooth. Let me know what you end up doing with it and I will do the same.
Sent from my PC36100 using XDA App
I have not decided yet. I have been busy writing apps for WP7. I also thought about using it as a remote or some kind of touch pad for the PC. They probably will sit in my closet then ten years later I will dig them out and laugh.
I need to find a rom with the bare bones no sense just to install some good apps for my computer. I gave the touch diamond to my sister when I upgraded to my evo. She just bought the evo shift so I'm getting it back from her.
Have you got a chance to check out Touchxperience? I haven't read up on it since I switched to android...
http://www.touchxperience.com/
TouchExperience looks awesome and I will definitely like to play around with it once it comes out.
Ok.. this is my setup... running mightyrom 6 from http://www.mightyrom.com and installed gremote from their website. http://www.gbmsoftware.com/
I found a windows mobile version under the download section.(free) I couldn't get the phone to active sync with my PC so I downloaded the app(gremote) to my PC and downloaded the cab(gremote) to my phone.
I go to settings on my diamond and the the Home section-> Items and unchecked everything. Then I took the gmote app and put it in the windows/startup folder. This way when I turn on the phone the remote app starts on its own.
Its really not that hard to setup. Im curious to hear someone else try it..
Its awesome.. I can now use the phone to control the mouse pointer on my 32 inch flat screen.It also functions as a keyboard too.
The app uses wifi to connect so make sure your wifi is turned on on the phone..
My only source of internet at the moment is tethering my evo4g to PC using wireless tether and its amazing all my devices are now linked..
Cool and thanks for the feedback. I am still busy writing apps for WP7. Today I got a great geeky idea but I like it. I am going to set up the phone to provide useful information like weather or something and thought about mounting it on a wall or putting somewhere else. Done right it will be seamless and always their to provide info.
Hopefully you do not read about me in the news. Mans house burns down because he had a phone embedded in the wall and the battery exploded.
Q What can I do with my Diamond
ArmyScout can you get in touch with this guys or anyone here to shed some light on a few things for us?
And did Peter pass? If so when and how? Or are you just setting this for him as Head of the Pathfinders fo him? more info, more info.
Re:
Hakim Rahman said:
go to thread Android 2.0 (Eclair) for CDMA Diamond at http://forum.xda-developers.com/showthread.php?t=606760
Click to expand...
Click to collapse
Please check once link is working or not. then post it
Any body tried the app wifi key board on their hero or any other phone works great. Saw it on the show click and knew i had to try it.
So Basicly you use your key board that you use for your pc but for your phone.
Heres the link.
https://market.android.com/details?id=com.volosyukivan&hl=en
As i said it works great and i think you guys should try it out.
sorry but nop ...