So anyways, I got my Tilt to boot.
Unfortunately, I'm on an HARD SPL that's so slow on my Tilt -- 6.1 Windows, etc.
Well anyways, I'm just having a problem and that is when I rebooted my phone, it went into the new 6.1 Windows. However, it says insert SIM card and when I did that, the whole thing went back to bootloading mode and I don't know why. I need help with this.
I'm trying to take pictures of the city here so I can go back to college and the only camera I use is my phone. Thanks for the help, guys!
Ok, what SPL and ROM are you using.
3.29 is the one I used.
Wait, I got my Tilt working and it's on 3.51 now for the WM6.1.
However, I have problems having the phone connect to the Windows Mobile Device Center. So, can anyone give me a head's up with that? Thanks a bunch.
Related
Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.
Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain
44 views no one have a slight idea..
anyways thanks alot everyone for visiting
Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny
Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.
well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST
By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates
No problem!
Thats what we're here for!
Regards
Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.
No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....
well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility
Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP
Ok, I posted a thread on the main wizard forum and I'm trying again here since this is a little more on topic in this forum.
Here goes with all the technical specifics I can add in.
I recently got an HTC 8125 (I've had one before and never had this problem)
I immediately CID and SIM unlocked the phone using lokiwiz's unlocking program.
I inserted my tmobile sim into the cingular 8125 and all was great.
I upgraded the ROM to the TNT 19199 batch of WM6.1 Everything is still great.
The phone worked awesome, the next day I downloaded the T-Mobile UK radio version 2.19.11.
I flashed it to the phone and everything seemed fine, the program finished and the phone restarted.
Upon restart I was greeted with a no service message and the phone behaves as though it is shutoff. No big deal, right? WRONG...
I went to the tmobile and cingular site and got the default roms from each just in case.
I then connected the phone to the usb and activesync would not recognize the phone, or do anything for that matter.
I used an external USB bluetooth dongle to try and connect the phone to the PC to flash the default rom and fix the radio problem, this wouldn't work either.
I then put the phone into bootloader mode, this works ok, I see the USB in the corner and figure I'm saved. Nope.
I ALWAYS get an Error Connecting from the rom software. Even though my PC recognizes the phone, active sync does not. I re-installed Activesync and rebooted my computer numerous times. To no avail.
The ONLY rom software I which has worked is the TNT 19199 but it doesn't fix the lack of radio.
Here are some other points of interest. On phone bootup I get this:
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
The USB will recognize the phone ONLY in bootloader mode, otherwise when the phone is on the Today screen I get no recognition.
The TNT rom has worked twice when I tried it, (by worked I mean it allowed me to re-flash the same rom) Of course the TNT rom doesn't work all the time, it has given me several connection errors.
No other rom has worked as of yet, all others give me a connection error.
The battery meter will not display, nor will it tell me what type of battery or how much charge is left.
The phone will sometimes go to amber light when plugged into the wall charger but NEVER with the usb to PC cable.
I can still navigate around the windows mobile 6.1 interface though it moves incredibly SLOW. i.e. I pushed the comm manager button to make sure the phone didn't simply get shutoff and I waited about a minute and a half or longer for it to bring up the comm manager.
I need some severely good advice and some new tricks to try, I'm running out of ideas, I saw several threads under the HTC TyTn threads about similar problems and something about the IPL/SPL being important but I'm not sure what they're talking about. I have searched this forum and I have found people talking about similar problems, all the responses point to, "If you can get to the bootloader you're fine." This is incorrect.
So seriously, help me out here.
HOW DO I FIX MY STINKIN' PHONE.
I would suggest rolling back to your working configuraton by reflashing using a memory card instead of the USB.
fixed.
Actually I finally figured it out.
It seemed the reason that those roms worked sometimes but not others was this: To get the phone to recognize you had to do things in a VERY specific sequence.
You had to let the phone boot all the way into WM6 and then plug in the usb cable. Then put it into bootloader with the camera / soft reset button method. Then you waited for the nice USB connect sound, and began the ROM flash RUU program. (In this case it was the T-Mobile default rom).
Once that was done the phone acts as normal and everything is good.
Doing anything out of order or putting the phone into bootloader without it having first booted all the way to the OS would give you the connect error.
Please clarify if you're running WM6 with IPL/SPL 1.xx? I believe that's not possible to get good results that way.
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
TNT 19199 batch of WM6.1
Wm6.1 on ipl/spl 1.xx,strange ,how do you explain this,how did you manage to get wm6 installed with ipl/spl 1.xx,cuz it only works on ipl/spl 2.xx and higher. Are you sure its TNT 19199 series wm6.1 Rom ?
Hi, I have an HTC 8125, and I desperetely want to flash it with a WM 6 ROM, But I only have Vista, and I am having so much trouble following the threads on doing this with Vista, that I am going to have to give up if I don't get some advice. I have downloaded the Wizard Tool, but it won't ever recognize that my phone is connected, even though Mobile Device Center says "connected". I tried using the program HARD SPL G4, but when it makes the screen go white on my wizard, mobile device center automatically says not connected, and at that point even though I get the screens to proceed with the new Rom, they dont work because my phone is no longer connected and nothing that I do lets it connect to mobile device center while the screen is white. I have to reset the phone and then the rom update doesnt work anymore.
Please help, even if it is pointing me to a topic or post that I don't know about. I have spent 12 hours reading and failing over and over with this.
Simple answer to all of your problems is Vista,Do it on a WinXP machine there won't be any problems.
Although,its possible to unlock and flash through Vista,but its still not compatible,WinXP is highly recommended.
All,
I have been reading all day and I have tried everything I came accross so please don't flame me and tell me to read the forums! If I missed something I apoligize but I have been working on this all day.
Yesterday morning I used one of the recently popular kitchens that I have used before with success. After I made some tweaks and flashed my Tilt the phone boots up fine but I cannot connect to my at&t service or ActiveSync. At this point I just want to revert to a known good image but I can't connect to ActiveSync.
I deleted the releationship from the phone, uninstalled ActiveSync from my computer, re-installed ActiveSync, rebooted my computer and still nothing, along with many, many other things. WiFi seems to be working and possibly Bluetooth.
How can I get my phone back? I learned a lesson and I hate begging but I would like my phone back and I know this is the place to save it!
Thanks,
Tom
I am far from an expert, but in my experience forcing the phone into the tri-colored bootloader screen(hold power, camera, and reset) will allow you to update, when you cant establish activesync.
Resolved!
j0nnyb1aze,
Funny thing that is exactly what I did and I am back in business! Thanks!
No Image found !!!
Hello!
I did so but apear very fast No Image found !!!!, what should I do now?, I have read and I've done every step of the forum and not usable
Hi All,
I've been running the Orange (UK) WM6.1 ROM for months/years without problems and was messing around with some texts and somewhere along the line I have ended up with the standard 4 stripes down the screen and some text top left.
I have scanned the forums here and the wiki and they suggest connecting using USB and running Mtty.exe, however whilst I can connect the phone using USB Activesync won't recognise it and then I get an error from Mtty.exe because it won't recognise the phone.
I have also tried re-intalling the Orange ROM as well as newer roms, but none of them seem to be able to connect to the phone.
Active sync doesn't seem to be able to connect on Win 7 or Win XP despite them syncing fine this morning.
So, any suggestions out there?
I'll do some more searching, but any pointers would be appreciated.
Thanks.
Try a new USB cable, I went through 5 in one year, or try flashing via SD card.
Well I tried a couple of different leads and no luck.
I did manage to get some info from mtty.exe, but didn't make sense.
I took my SIM out to use in another phone and having left the battery out for a while, put it back in to try again at getting it to start and it booted fine without any problems.
After a bit of messing around it seems like that the boot problem is either down to a problem with the SD card, SIM or a foreign object in phones casing.
I keep the phone in a pocket of my overals that I use a workshop and occasionally iron filings from a grinder can get into it's working, which is what I think has happened.
ANyway, it's back and working again, only need to keep it going until Orange can get some Desire HDs in
Hi!
Read those threads again,the solution is there.
1.Disable USB connections in Activesync menu (right click on green icon on the tray)-->connection settings-->untick "Allow USB connections"
2.Put your device in bootloader mode (yours is in it)
3.Start to connect it with MTTY to do what you want or just run an official Orange UK ROM update
If everything is fine,your device will be alive again.
After that install Hard-SPL to avoid problems like this.
BR
Scootie
P.S.:Sorry,I didn't read post #3,but it can be useful later.
One more tip:check the camera button.
Thanks Scootie,
I'll try the Hard-SPL thing - the jumping into boot loader seems pretty random, has happened a couple more times and I find I have to pull the battery for several minutes and then try a restart.
The camera button doesn't seem to do much other than what it is supposed to.
Pretty annoying since I have had the phone for 3 years, but have not had signal at home so hardly use it, and now we have signal due to Orange/T-Mobile merger from the beginning of the month the phone fails me :-(