Help. My T-MObile MDA Died - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I was upgreting my firmware when suddenly my f...ed up laptop overheated and shut down at 99%. Is there anything I can do or it is just trash now.
Thank

Read the stickies and use the search funtion, that is all that I will say.

Hey hey hey stay cool
Calm down men...
First of all... give us more info All we know that stupid things happends when upgrading but.... if you read more even if u are created a new thread dont have the answer so tell us this...
If you can put your device in bootloader we can redirect you to the correct thread...
If you arent CID SIM Unlocked we can redirect to you to the recovery steps...
but dont come and say im a stupid and my laptop is worst than me... please...!

Related

Another stuck in bootloader

Don't be too harsh, I'm a noob here.
First of all: I've purchased SPV m700 with instructions how to unlock it. During flashing something went wrong, the PC reset etc. Now I've got nice three colour screen on my PDA and cannot do anything, even turn it on or off. I suppose it cleaned the old ROM and did not manage to write a new one.
I've read this thread: http://forum.xda-developers.com/showthread.php?t=308691
and TBH cannot understand a thing from it
Is there any straightforward way I can unbrick it? You know, something that a guy without a vast programing experience could manage to do? Cheers in advance good people!
OK, thanks guys for great support and warm welcome...NOT.
No, I won't start crying here, just hope I'll meet one of you uberman 'experts' from this forum on one of the forums I'm an expert on and will be able to recognize you. Best wishes.
Anyway, just for the record of other newbees who struggle to get any answers: I managed to unbrick my SPV M700. I had no idea what I was doing, neither will you I guess, do not come to me crying if it doesn't work or if it makes your device a real, solid brick. It may work only for Orange SPV, no clue as to HTC P3600, Trinity or others.
I ran the thing from this thread: http://forum.xda-developers.com/showthread.php?t=309959
It failed to finish running, showed 'error[270] invalid image' or something similar...
But the device was back to normal again So I'm one happy bunny.
Hopefully it will give others ideas on how to deal with their problems. Good luck to you all. I'm off.
Dont let this little incident put you off upgrading to WM6, just read the threads thoroughly first, then FLASH!
im on UK M700 with Mun_Rus 2.00.SE WM6 ROM
FANTASTIC!
GO FOR IT!
goodie said:
Dont let this little incident put you off upgrading to WM6, just read the threads thoroughly first, then FLASH!
im on UK M700 with Mun_Rus 2.00.SE WM6 ROM
FANTASTIC!
GO FOR IT!
Click to expand...
Click to collapse
What I worry about is loosing warranty (although I'm not sure if I've got one at all - beware of Ebay seller id1emind!!!). Well, TBH I do worry about bricking it again too...

new owner some questions please.

Got tilt last week.
Kinda scared to unlock with software. paid $10 for unlocking service on ebay. very fast.
I would like to flash the rom with a faster performing one but my main question is do I need jumspl or hardspl if it's unlocked?
Also when exactly do I install the radio?
is the order like this?
jumpspl, hardspl, radio, rom?
I did read the tons of pages, but no offense to anyone but it's not written in a user friendly kinda way. again, no offence.
What's the faster performing roms out there?
I'm also having problems wih my activesync. I got a red exclamation mark on the system tray. I have 3 unresolved items in the window. tried to fix them which are some favorites but need to install outlook. I can't sync anything else besides pics and videos as well. I do have outlook express working so what the heck does it want me to do?
any help appreciated.
You did not.
http://forum.xda-developers.com/showthread.php?t=433835
Oh yeah, and I cannot find a quote but its goes like this:
And dont ever try to ask, which one is the best/fastest ROMs.
saw that one and read, twice.. still doesn't answer questions. After phone is unlocked do I need jumpspl and hardspl? it talks about cid unlock, which i'm assuming i don't need since I unlocked? which still, it isn't written well. I have to say people , especially the seniors have little patience for giving new people guidance. The guide is not written well, and doesn;t answer any question I just asked except the rom question which I still don't why do people get so impulsive about that. It's not a nice way to treat new people IMO.
as well if you ask newbies, I will tell you the information is too spread out and quite unorganized. check this page tell me if you don't htink someone did this after smoking something:
http://forum.xda-developers.com/showthread.php?t=397434
with 40000 links is a newbie supposed to understand with all those links.? I don't think so. I did see the link which shows the whole process and again, doesn't answer the specific questions.
amitsivak said:
saw that one and read, twice.. still doesn't answer questions. After phone is unlocked do I need jumpspl and hardspl? it talks about cid unlock, which i'm assuming i don't need since I unlocked? which still, it isn't written well. I have to say people , especially the seniors have little patience for giving new people guidance. The guide is not written well, and doesn;t answer any question I just asked except the rom question which I still don't why do people get so impulsive about that. It's not a nice way to treat new people IMO.
as well if you ask newbies, I will tell you the information is too spread out and quite unorganized. check this page tell me if you don't htink someone did this after smoking something:
http://forum.xda-developers.com/showthread.php?t=397434
with 40000 links is a newbie supposed to understand with all those links.? I don't think so. I did see the link which shows the whole process and again, doesn't answer the specific questions.
Click to expand...
Click to collapse
Just for be safe - flash HardSPL.
You can always revert back to original one. Answer how to do it is somewhere in the Kaiser Wiki.

Going back?

If I put the leaked 6.5 ROM on my phone, does anyone know how to go back to the factory software?
Are a stock T-Mobile ROM and radio for the Touch Pro 2 available?
Thanks guys! Just wanna be able to go back if I'm not happy.
If you flash HardSPL then yes, you can go back to 6.1
Ok, great and is there a 6.1 Stock T-Mobile ROM yet?
i dont mean to sound like a jerk at all... we're all noobs (i still am) at some point so with that said there are alot of threads where people ask for the original rom.
if you seach for a lil bit your answer can be found a few places... even google.
folk round here tend to get a lil harsh having to reanswer the same questions, for future reference.
this thread was made recently:
http://forum.xda-developers.com/showthread.php?p=5379887
original rom:
http://forum.xda-developers.com/showthread.php?t=550975
on a side note, i doubt you'll ever go back once you find the ROM that suits you
Hey thanks for the reply. I've been on here for a while and I'm no stranger to forums and forum etiquette so I'm not gonna use being a noob as an excuse for asking that question. But I do think we can get a bit stuffy with rules in forums in general, not just here. I think in the midst of a conversation with someone, to casually inquire about something without necessarily asking to be led by the hand to it, is ok. I'm sorry to have seemed like I was asking to be spoon fed, but I was just having casual conversation with you. With a simple yes, I would have searched myself.
But thanks for going to the trouble of finding those links. I just need to confirm now that that ROM and radio actually are working and not flawed in some way. I gotta figure out who created them and how.
Thanks again!
no problem man, it aint even like that with me... i had the link bookmarked anyway.
i was just trying to save you from being called out later on.
i dont never mind answerin anybodys questions cause i been there lookin for simple answers.
glad to help.
the rom works fine, i flashed it just to be sure everything was a-ok when i first got it.
like i said tho, once you find "your" rom, the links will be useless haha

Wifi Problem and no Hard-spl

Look ive been around here for a long time and disregard the low post ive mastered the search button! My phone was stolen and now I have the stock T-mobile pro2 and its having serious problems. I cant get Hard-spl to work both ways and Oliopro seems too busy "really i can bet he is" to reply me with a solution. Ok heres the problem my wifi takes forever to connect and before it does it say the key is incorrect when its not! NOW even when it does connect it still does not work and i do not have a data plan! So im stuck with a manufactured brick with no solution. Anyone can help me with another kind of Hard-spl so i can flash rom and see it its just a software issue! I really cant wait another week sending this back to T-mo just for a small problem as this.
I've read a lot of posts regarding people having issues with Hard SPL and most of the time by making the small donation and getting whatever version that is "paid" seems to fix that problem.
Something to think about for sure if you've exhausted all other possibilities
Sounds true i just wanted to see if anyone had a fix to the wifi problem ive been having. Most guys on this forum are nice but seriously team iphone has won me over im just plaing around and doing reviews here and there so im not up to 1 paying for something i wont use for a while....and even if i do i always switch units. 2 letting something be called a donation and then say its a minimum! I hate to be rude but im old, thats pretty stupid! you charge! AND then ask what you throw on top! IM SORRY but things like that piss me off....my opinion....NCRG has gotten over $50 from me in the last year because i love his work.....charging is something we developers just dont do! and if you are the at least admit it! Thanks for the help^^^and advice but ill look around if nothing well then bad review on the way!
You say that you have been around for a long time, then you already know a few things.
- Post hardspl questions in the hardspl thread.
- Be detailled with your problems. How can you expect that we can help you with installing hardspl when all the info that we get is "it does not work"....
So please post your question in the hardspl thread and be detailled. Post the steps that you did and then we can help you

[Q] bricked g1

Hi guys just wanted a quick question answered
I was cleaning my room up the other day and i came across my g1 in my cupboard
I bricked my g1 ages and ages ago due to i cannot remember exact it was something like I flashed the radio before the rom or the rom before the radio and it just hangs on a t-mobile screen
I know people where looking for ways to get around this so I was wondering if someone has come to a quick solution to this
thanks
Why are you posting the same again?
To solve your problem: search for JTAG in this forum, the only chance to re-animate a really bricked G1.
someone said wrong section so yea
and the link he gave me didnt help
aaah had a look at that... seems too much trouble
thought by now something better would have been found
anyways thanks for your help
in the Q&A section for G1 there's actually a specific forum for Q&A lol you'll find it jus gotta look around.. someone should be able to help you betterin there if anyone checks anymore..

Categories

Resources