I'm sorry to re-post this but I forgot to mention something imortant.
This happens to me with other ROMs and Radios, that's why I put it in the general discussion. I hope re-posting like this isn't rude but my original post is closed. If I flash the SPL Hard to 3.56 will I loose my data?
Hello all,
I have an AT&T Tilt using HyperDragon III on T-Mobile network and radio 1.65.16.25. The problem I'm having is that when I am on a call and the signal drops very low or is interrupted the phone completely locks up, buttons, screen, power button everything. The only way I can get it to work again is to soft reset with the stylus. I've searched these forums and the web but have not seen reference to this particular problem. I've seen references to Kaiser Tweak for general freezing issues but this only happens when a call is interrupted. Has anyone experienced this or know how to resolve? Thanks.
xda-developers rocks.
Flashing SPLs will not cause any lost of your data.
I would try a different radio. I've had similar problems with lockups and when I use a different radio it goes away. Check with the HyperDragon thread to see what's recommended for SPL and radio.
Related
i went from 2.19 to 2.61 but not any better. can someone forward me the link to download 2.47.11 radio rom cab file?
i tried to search but when i put in the search field 2.47.11 radio rom, 21 pages of related topics pop up and i can't find anything in terms of downloading this rom.
thanks, m3m3
http://forum.xda-developers.com/showthread.php?t=279380
xeno1 said:
http://forum.xda-developers.com/showthread.php?t=279380
Click to expand...
Click to collapse
hey xeno,
seeing that you are senior member, i have some questions for you.
how do you like 2.69 rom? here is my situation that i am running into with my 2.19 radio rom.
i cannot receive signal in my house but as soon as i walk outside, it get 4 bars but it takes awhile to recover. i tried 2.40 before but during a call, i could not switch over with call waiting and sometimes, when i call my voicemail, i could not hang up. so, i went back to 2.19. 2 days ago, i installed 2.61 but i don't get any better signal strength than 2.19. but with 2.61, i am experiencing the same problem of not being able to hangup during a call or navigating through my voicemail box. it seems as though it doesn't recognize any button inputs or touch screen inputs.
i bought a longer lasting battery for my MDA so power drain is no issue. the main issue is reception which i will trade off with battery life.
my question to you is are you happy with 2.69 with regard to reception and recovery of lost signal?
maybe i should try 2.69...can you point me to the download?
i am running SPL 2.17/IPL 2.17 on Faria's Crossbow
thanks in advance.
-Mike
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
xeno1 said:
I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
Click to expand...
Click to collapse
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
i've searched for DTMS but the search pulled up nothing under Wizard except for this thread. any ideas??
xeno1 said:
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
Click to expand...
Click to collapse
mestrini said:
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
Click to expand...
Click to collapse
Maybe it's just the .318 WM6 versions that have been having that problem then. Using any other radio versions with it other than 2.19 or 2.69 causes you to have a lot of missed calls.
m3m3, I'll have to do a little searching and see if I can find those threads for you. It's been a while since I've seen them.
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Looks like reinstalling your phone dialer pad should fix the problem. The only other solutions I came across all involved doing a hard reset.
lol...thats fine man. after i installed 2.69 radio rom, i missed a buttload of calls especially from my wife which wasn't too good. had to go back to 2.19 radio. hopefully, someone can program a good radio rom that doesn't miss calls and increases reception otherwise, I will have to migrate to the iphone and to cingular (att)....
xeno1 said:
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Click to expand...
Click to collapse
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
PeterB1234 said:
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
Click to expand...
Click to collapse
What Radio version are you using?
Try upgrading to a WM6.1 Radio (or a different version).
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Ta
Dave
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
PeterB1234 said:
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
Click to expand...
Click to collapse
That should be OK.
Have you done Hard SPL, if so try some of the other Radios, they might work
Ta
DAve
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
PeterB1234 said:
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
Click to expand...
Click to collapse
Hehe
Hard SPL allows you to flash you phones ROM with Images other than the ones provided by your carrier.
Installation instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922 You will probably be best with 3.56 version.
Flashing a Radio help is here:http://forum.xda-developers.com/showthread.php?t=393182
If the Radio is listed in this thread and is for the same WM version it should work. All the other info is where it was ripped from, it only goes in the thread if it works.
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Thanks
Dave
DaveShaw said:
Hehe
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Click to expand...
Click to collapse
Yes, it's just the stock WM 6.1 ROM. I'm not interested in being a power user, I just want the very basic improvements. This may change down the road, but everything with the exception of sound works great.
In the Sounds & Notifications settings. Events, Programs and Notifications are checked but not Screen Taps or Hardware Buttons. When I click on the "Speaker" icon, both the device and phone settings are at max and on.
I dunno then, maybe another ATT user will come along and have some more help, sorry
Dave
Thanks Dave, I appreciate your help. I'll probably just hard reset it and see what happens. Thanks again.
Maybe the bloatware install was interrupted to early?
PeterB1234 said:
I'll probably just hard reset it and see what happens. Thanks again.
Click to expand...
Click to collapse
Absolutely a good idea, especially if you've just upgraded ROMs (always a good idea to do a hard reset after a ROM upgrade anyway as a matter of course). If you interrupted the configuration/bloatware install at the wrong place, that may explain why some of your sounds aren't working also. Try the full uninterrupted install, test the sound in all the areas where it currently doesn't work properly, then work backwards doing another hard reset and interrupting it at the 'right point' until your sounds are there but not the things you don't want.
The OP was 100% correct. He sucks at searching.
Hey m8 i have a same problem as U! I tryed everything but nothing. I dont know how to solve this one. I also tryed every fck version of radio and even original htc OS. I also tryed with hard reset but didn't help. I also have topic in General area - Sound problem - DEATH! so...u are not alone
kimtyson said:
The OP was 100% correct. He sucks at searching.
Click to expand...
Click to collapse
Yeah, but at least I'm not posting stupid comments just to try to boost my post count.
------------
Hard reset worked, so I'll just hope it's not reoccurring.
Hello all,
I have an AT&T Tilt using HyperDragon III on T-Mobile network and radio 1.65.16.25. The problem I'm having is that when I am on a call and the signal drops very low or is interrupted the phone completely locks up, buttons, screen, power button everything. The only way I can get it to work again is to soft reset with the stylus. I've searched these forums and the web but have not seen reference to this particular problem. I've seen references to Kaiser Tweak for general freezing issues but this only happens when a call is interrupted. Has anyone experienced this or know how to resolve? Thanks.
xda-developers rocks.
jpp2109 said:
Hello all,
I have an AT&T Tilt using HyperDragon III on T-Mobile network and radio 1.65.16.25. The problem I'm having is that when I am on a call and the signal drops very low or is interrupted the phone completely locks up, buttons, screen, power button everything. The only way I can get it to work again is to soft reset with the stylus. I've searched these forums and the web but have not seen reference to this particular problem. I've seen references to Kaiser Tweak for general freezing issues but this only happens when a call is interrupted. Has anyone experienced this or know how to resolve? Thanks.
xda-developers rocks.
Click to expand...
Click to collapse
might try hard spl 3.56?? not sure if it will work i am running hyperdragon also and i dont have this problem, you might want to try to post in the hyperdragon thread, maybe someone there has had this problem
lupe
I recently flashed my phone to Dutty's dual touch 6.1 rom (from hyperdragon 3) and ever since i did phone calls have been a bit hit & miss. Ill ring someone and they wont be able to hear me, or ill ring someone and from the minute it ''connects'' i get a sort of staticy noise even after i hang up. Only way to get rid of it is to do a soft reset.
Am i right in thinking this is probably to do with the radio being miss matched? never had the problem before so just wanted to check it is before i started playing around with it.
if it is the radio, is it just a matter of hunting around for a new radio that goes with duttys ROM & flashing it in a similar way to flashing a new rom?
thanks guys
========================
MOD EDIT:
Please refrain from creating multiple posts about same topics. This is against xda forum rules. I have merged both of your threads together.
i also struggle to connect to any wifi networks. iv reflashed Dutty's latest 6.1 ROM (dual touch afaik) but it still has problems. I always thought dutty's Rom came with their own radio?
thanks guys
Wifi - unable to connect?
Last few days iv struggled to conect to any wifi network. When i select the network and try and connect the phone just sits there ''connecting'' until it tells me its unavaliable. iv tried on 2 different networks, both which have worked in the past.
It started when i flashed to Hyperdragon III ROM, then reflashing two of Dutty's ROM (latest 6.1 and dual touch) still hasnt sorted the problem.
Iv tried searching and couldnt find anything, and im getting a tad desperate tbh. I thought it could have been a problem with the radio, but both of duttys ROM come with their own radios and they have worked for me in the past.
This is a clean install, on Duttys latest 6.1 ROM and im lost for ideas!
Can anyone offer any advice? cheers guys
Hello everyone,
I have done a ton of google searches and spent about an hour reading through threads of people with similar problems. I have flashed a few roms and different spl/radios etc. Nothing seems to fix the problem.. Nor have I seen anyone in a post had their problem fixed either - they were just criticized and told to search the forums or read a generic faq on flashing radios..
Anyways, after reading all that and trying a few different radios nothing seems to help.
My device, while connected to 3G, can usually make 1 call when it first connects, then each call thereafter will fail with a beep beep beep.
I am running 3.29.Hard spl
Rom Version TPC_V10_MEGA WWE
Radio Version 1.70.18.02
Protocol Version 25.83.40.02W
Has anyone found a successful combination to correct their issues with the 3g network and their tilt? If you have no issues and have the same phone please post your build.
I have flashed from original roms and a few diff radios to no avail .
I really want my damned 3g to work.. and no I dont want to just manually switch to EDGE (which is what I have my phone forced on now).
Thanks in advance.
same here
I have had the same issue. The phone will show H or 3G and you cannot make a call. I have just accepted using the edge system to keep the phone working fine. The only thing you loose is the faster internet speed the phone otherwise works fine. I have assumed that I dropped the phone and something happened to the antenna. I contacted HTC about the issue and they say it is a hardware issue even though I have seen many speak of the same issue. I have the tilt.
I thought I did the same thing until I started searching and see that there are numerous people with the same issue.
I will just be patient and wait until a new winmobile phone comes out with a oversized screen! Hope the next xperia is that
Radio Issue
I had the same problem with that radio. I changed back to the 1.65 radio and everything worked properly again. I hope this helps.
See my sig for what I am running. I have run TPC's roms as well as others and almost every 6.1 compatible radio there is and have never encountered that problem.
Have you tried to go back to stock everything, rom radio and spl to see if that makes the difference ?