Stuck - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello people,
I have a serious issue with my Wizard. After a lot of searching, trying things, etc, i still can't get it fixed I'm ready to give up because it's driving me nuts :/ So anyway, i bought replaced my dead battery a while ago. My Wizard was rebooting constantly and was more or less useless, and after trying a lot of things i concluded it was the battery's fault, so i replaced it.
After that i flashed to a TNT Professional ROM, and all was good. Or at least, that's what i thought. My reception was almost completely gone, i had no reception for most of the time and the times i had reception it was almost nothing. So i flashed back to the 2.19 radio, wich should be stable and one of the best. This didn't changed an awfull lot
But the worst part, my Wizard continued being unstable, even with my new battery. But this time my Wizard doesn't reboot, it crashes to a white screen. The white screen doesn't appear at once, the screen kinda fades to white, line by line. Weird stuff. So i decided to flash another rom, the WizFlo one (with Manilla).
This rom proved to be even more unstable, and still had the white screen problem.
I've had just about enough of my Wizard right now and i want to flash back to the original (T-Mobile WM5) Rom, to see if that solves the stability issue or not. The problem is, ever since i have the WizFlo rom, i can't flash anything. Not in XP, not in Vista, not in normal mode, not in bootloader mode. I can use Active Sync/Mobile Device Center, the Wizard will connect but won't sync data. And it won't flash ROM's, since i get the "PDA doesn't respond" or a "isn't connected" error :S My PDA does give some error, but the text balloon doesn't display correctly so i can't read it :S (yes, there is a WizFlo fix for this, but that doesn't even install..)
So now i'm stuck with a non-working ROM without the option to flash another rom. Can anyone help?

Hi Johrizz----
Well tell me...
Does your wizard is fine... working but!!!!!!!!! Suddendly!!!!! the screen begins to dissappear line by line and becomes white.... then stucks there and it needs to soft reset!!!??????
Well you hava battery issue your battery is bad!!! dont works!!!! turn on your device fine.... unplug your battery suddendly you see that the screen is getting the same but shutdown of course... so maybe the "new" battery shows full charge but nop! isn truth your batt is lying!!!! hahaha
I felt Like Dr. House
Try to use your old battery full it! at 100% then downgrade to the original then upgrade again to Wizflo if you want... everything with the batt at 100% dont do the upgrade process with your new batt anymore you will gonna brick your phone...
try to find a new one or try your new batt with other wizard maybe witha a friend's wizard. if your friend's wizard starts to ****ed up is your batt if is not... see it at your back case again... i have one with the same problem and when I saw that is not the prob i saw that my batt dont assets very well in mobo and scratch a little the terminals on batt and on the device diassemble it and i see the pins on the device werea little pushed more than normal... and buy a new back case these two things help me a lot without buy a new Battery cell.

+ Que PPC said:
Long story
Click to expand...
Click to collapse
I'm not quite sure i understand your English, but i don't think it's the battery. I mean, i just got a brand new one from the store :S Oh and flashing worked perfectly with the new battery, the "PDA not responding" thing is only since the WizFlo ROM. (But the crashes were even before that)

However....
Do something... if works or dont... try another thing...
Dont come and reject all!!!! Dr. Chase!
hahah I like Dr. house

Oh, really? You're not helping

Amazing!!!!
You are saying im not helping you!!!!????
You are like my mom men!!!!!
So... maybe somebody answers your interesant problem...
See you soon men
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Right, now i really don't understand what you're saying...

First of all,always flash with a fully charged battery,check if the battery is fully charged.
Secondly,Flash on a WinXP machine,its highly recommended,Vista still has problems.Activesync is not required for flashing.So either disable it and delete the partnership with the phone and delete the profile.Diable Anti Virus/Firewall before flashing and try to close as many programs/applications running in the background through Task Manager.Don't use pc for any other purpose like Microsoft office or surfing the net during flashing.
Connection errors are mainly due to weak or dead battery,so confirm you have a good and fully charge battery,your new bought battery cud also be faulty,either recharge your old battery and check it out or borrow/bye a new battery of renowed brand.
Whitening of screen cud be due to many reasons,like weak battery,Flex cable underneath the screen may be faulty or detached or Digitizer of the screen going weak.

Sarcasm....
Hahahaha I have read your green (blue?) square at your signy...
I dont Understand... your not helping me Zabardast!!!
OMG!!!
Sorry Zabardast I need vacations....

Bon Voyage Budy!

Related

Backlight/Screen won't stay off, turns back on after only moments!

I've had this tilt for a couple of days now and this new screen problem only started happening today. My screen/backlight turn back on moments after being turned off, either by the power button on the side or after the short timeout.
I've searched through the forums to no avail. My bluetooth and WiFi are already turned off and I do not have any programs running in the background.
The problem only appeared today and the only program I've installed today is Xpress Mail. Could Xpress Mail be causing this problem?
Any suggestions anyone has would be greatly appreciated. This little glitch is getting on my nerves pretty bad.
aagil001 said:
I've had this tilt for a couple of days now and this new screen problem only started happening today. My screen/backlight turn back on moments after being turned off, either by the power button on the side or after the short timeout.
I've searched through the forums to no avail. My bluetooth and WiFi are already turned off and I do not have any programs running in the background.
The problem only appeared today and the only program I've installed today is Xpress Mail. Could Xpress Mail be causing this problem?
Any suggestions anyone has would be greatly appreciated. This little glitch is getting on my nerves pretty bad.
Click to expand...
Click to collapse
This sounds like the opposite issue of the known backlight error.
You can try this to see if it might happen to also solve your issue.
http://www.htc.com/us/supportdownloadlist.aspx?p_id=67&cat=all
I just gave that a try but it didn't work. I'm still having the same problems as before.
I also uninstalled Xpress Mail but that didn't work either.
Any other suggestions??
The only other thing i could recommend is a hard reset. Have you tried that yet ? ( It will restore the phone back to factory )
To do this you will need to hold the stylus in while pressing these buttons ( Red dots ) :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe I'll tackle that tomorrow. I've been adding and customizing things obsessively for a few days, wiping the slate clean might take some getting used to.
Thanks for your input!
Anytime! Thats what we are here for I just wish I have a better answer for you. Something somewhere seems to have changed a registry setting it seems. Easiest way to fix is to reset
On the plus side, it gives you the opportunity to install a custom rom that is much faster and has no bloatware ( If you feel brave enough to try ). Flashing sounds much more scary than it really is. There is almost no way to mess up the phone
One more thing. Even if you dont flash a new OS, you can still get rid of the bloatware ( Factory branding with all the apps you will never use ). Just after it hard resets just as the screen changes to " Customizing in 3 seconds", just poke your stylus in the hole and reboot it. It might take you a few times because I hear there is a split second but trust me it will make things better not being there!
Goodluck!
Check my 2 posts in the thread on page 1 and page 2. Sounds like you have a problem with a stuck camera button
Frank
The button for my camera seems pretty regular. My phone stays off longer than yours in that video, fordmav. Also, on my phone when the phone is off and I push the camera button it does not wake up.
Its looking like a hard reset is in my future.
I had this problem after upgrading to 6.1. It came down to a tweak or set of tweaks that I had applied, but I don't recall what they were. I've caused it using tweaks programs, applying multiple tweaks that caused no issue before. Going back in & undoing the tweaks got rid of the issue. So did a hard reset before I figured it out.
If you do hard reset, make backups periodically as you're installing stuff/tweaking successfully. That way, you can go back to a good point if necessary.
well I don't know what I did but the screen and backlight are remaining off, at least so far today. hopefully that's the end of the story...

Diamond freezes or TouchFlo appears to be broken

First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
-------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------
EDIT / UPDATE / SOLUTION:
I found the solution to this problem.
Like somebody told in this thread it is a software problem!
It seams to be an error in the ROM, that even a hardreset cannot restore.
So I flashed a newer ROM to my Diamond. It was the first time I did that, so I did not really know how it works. But at the end it was really easy.
IT IS JUST IMPORTANT TO READ ALL THE NOTES before you try to flash the ROM.
I upgraded my ROM from 1.93.xxx to 2.03.xxx but it is possible to reflash the same ROM to your device.
How it works?
Just go to http://www.htc.com/www/supportdownloadlist.aspx?p_id=133&act=sd&cat=all
and download the ROM you like. At the moment there are to ROMs avaiable 1.93 and 2.03
So download the one you like (size: +- 100 MB), then READ and FOLLOW all the instructions if it is your first time.
yeah thats happened to me couple of times...it usually happens to me when i leave my diamond plugged in the charger over night...occasionally, the device freezes up or reboots over night (i know this because when i wake up, i get prompted with insert sim passcode screen)
BlackFear said:
First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
Click to expand...
Click to collapse
I had something kind of like that except my screen output everything as if I was looking at it through a mirror, but the touch screen locations were still the same.
wow, can i have that skin?
joking, have you tried to re-flash? cool it a bit (5-10 degrees)?
http://diamond.forumotion.net/forum-f2/topic-t131.htm
I have the same problem and cannot isolate why it happens, but it is a coincident it happens when plugged in charger.
Only way I found to clear it is soft reboot
BlackFear said:
First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
Click to expand...
Click to collapse
broke youre glas?? lol
i dont got this on my diamond..
maybe flash a new rom?
what happens if you change your wallpaper??
IMHO this is drivers...
riki1 said:
http://diamond.forumotion.net/forum-f2/topic-t131.htm
Click to expand...
Click to collapse
Nice, but erm ENGLISH ?? Cannot understand a word.
----------------------
BlackFear said:
Nice, but erm ENGLISH ?? Cannot understand a word.
----------------------
Click to expand...
Click to collapse
Strange TouchFlo ...... strange language
Yeah yeah yeah, but does anybody know what this is???
BlackFear said:
Yeah yeah yeah, but does anybody know what this is???
Click to expand...
Click to collapse
I translate it(my link) , sorry for my english :
Sometimes I need glasses for see fine (I have only 1+), but now Diamond got me
I tryed restart TouchFlo, but it not help, only soft reset help I think .
Diamond is gagger
Malik05 said:
yeah thats happened to me couple of times...it usually happens to me when i leave my diamond plugged in the charger over night...occasionally, the device freezes up or reboots over night (i know this because when i wake up, i get prompted with insert sim passcode screen)
Click to expand...
Click to collapse
i had that, sent it back to HTC and they sent me a replacement
mugglesquop said:
i had that, sent it back to HTC and they sent me a replacement
Click to expand...
Click to collapse
its just a software related issue, not hardware (at least i dont think). But it happens to me very rarely...hasnt caused any issues.
It started 1 week ago on my phone...
I installed an Anti-Virus to check, but found nothing.
I did hardreset, now my diamond freezes less often.
But what can it be? And I dont know how to install a new ROM version, or how to complet flash the ROM...
And when I sent my diamond back to HTC this takes over a month to get it back, because here in Luxembourg they are so F***ING slow!
So, this is an edit of the message above:
I updated my Touch Diamond now from ROM 1.93.xxx to 2.03.xxx
It was kinda easy, you just have to go to the HTC Homepage, then to Diamond Support and Downloads.
THEN IT IS VERY IMPORTANT TO FOLLOW ALL THE INSTRUCTIONS IF IT IS YOUR FIRST TIME, so read!
I will tell you then in a few days if it had some affections to the problems I have with my diamond!
EDIT / UPDATE 1:
The phone seams to work a bit faster with the new ROM then with the older.
GSensor Calibration is already installed on this new ROM
New Version of Google Maps
And I think a newer version of Youtube.
Although some System Updates and Internet Sharing is now in choose-list when connecting to PC

Problems with USB/Screen - Help!

On Tuesday I managed to drop my Kaiser in some water. As quick as I could I fished it out, removed the battery etc and put out to dry.
When it finally got to start again I noticed there was no USB - I tried re-flashing using the SD Card which eventually seemed to work, however I still have no USB. The phone charges fine via the usb connector but there's something up with the data lines - No PCs see anything connected to it and even the bootloader just shows serial - no USB.
This wasn't too bad as I can synchronise with my PC via Bluetooth which works fine, as does WiFi, GPS and normal phon operation.
Everything seemed ok until yesterday when the touch screen stopped responding. The phone itself works fine but I can only interact with the hard keys/keyboard.
Anyone have any ideas apart from just see if it magically starts working again? I'm not sure if the flash could be an issue as I had problems trying to flash - kept on getting failures flashing from the SD Card. I'm currently on 3.56, radio 1.65.28.25, rom of 3.57.502.2 (21159 WM6.5)
It would be nice to have the USB but that's not as important as the touchscreen. I'm learning to get by without either...
Help!!! I have tried searching but not come up with anything that works
Dude you dropped your phone in water, it's going to break.
What rom did you flash ? That looks like an AT$T rom with and AT&T Spl, but I see you are on Orange. And where did you come up with WM 6.5 in all this. Please tell us what rom and where did you get it, did you or do have Hard Spl on your phone and if your phone is stock or cooked ?
But...
I would understand it not working at all, but the way that everything seemed to work apart from the usb connection seems weird to me, but then I am not an electronics/hardware engineer, just a software engineer! I've seen elsewhere on the site that a screen that wasn't responding to touch seemed to sort itself days later so there's still hope....
OK... additional information if it helps... the phone itself is a Vodafone v1615 (Kaiser) which I've used since I've got it with an Orange 3G SIM (kindly provided by work). The phone had Hard-SPL 3.56, radio 1.65.28.25 as recommended for Anryl's 61129 WM 6.5 Rom. Everything worked fine before the water incident - I've been (ROM) flashing since I got the phone been through iterations of Dutty's ROMs, HyperDragon's to this one.
Like Chumley said, " you dropped it in water " so at this point, do a hard reset , keep your fingers crossed and que sera, sera.
oh lets go for a swim..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just started another thread and then saw this one...
So I accident dropped my Touch into some water the other day.... Everything works except the screen... It works in somespots it seems but others Not.
Anything I can do to fix it or is it pooched for good. I guess it sounds like just try a hard reset and pray for the best.
Screen fixed!
Just to give an update, after a few days of learning how to use all the applications without a touch screen (for the times I really needed to, I used MyMobiler), yesterday a guy at work said that he had seen a suggestion to put the phone in a bag of rice! Thinking I had nothing to lose, last night (over a week since the kaiser got submerged) I put the phone in a sealed bag of rice for a couple of hours.
After flashing a couple of ROMs, I reset without the storage card in and clicked on the screen to calibrate the screen - and it worked!! I had put a blank file called welcome.not in the root of the storage card which normally bypassed the calibration - a very useful tip if you don't have a touch screen.
So now, I have a kaiser with a functioning touchscreen after being totally submerged in water a week back. The only issue I seem to still have is that I can't connect to a pc using the usb cable, although I can charge using it. HardSPL doesn't show USB when invoked The other thing is that sometimes the storage card isn't recognised, although it usually is when the kaiser is plugged into the usb to charge or a usb converter in connected. Slightly wierd that one.

BIG Problem with Xperia

hello
I have got a problem with my xperia, the top bar shows that my stereo headset is connected but is not...therefore, i cant hear anyone who is trying to call me or i call anyone.. i have been in a vodafone store and they could not find a solution, i also have done hard reset and is still the same... now im about to flash new rom. would that be a solution or any of you got different?
please help me, thanks in advance
try connecting headset again but give it a wiggle about, not too much also try pulling it out and puting it back in quickly several times in a row. be carefull.
i tried that already, not working
after a hard reset i can only assume it's a hardware fault, so i would go get it fixed because if you flash a new rom that will invalidate your waranty.
do that in the FMradio application
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
sorry to hear that. good luck with that
last time that annoying thing happened to me i had to go to the htc HD fm radio app and plug and unplug the offical 3.5 connector to make it work( try plugging->listen to radio->set output to speakers-> then unplug)
a bunch of questions:
-what rom are you using
-did you try different 3.5 connectors
-is the earphone that caused the problem low quality?
the last time this happened to me i used the stylus and just waggled about for ages and ages and eventually the sensor registered that the headphones weren't plugged in.
do a search as plenty of people have had the exact same problem ...
good luck !
yes - just waggle the stylus around in it until it goes - worked for me
thank you..the thing with stylus works, hopefully but its still anoying to do that every time i put my headset
i have got an original vodafone uk rom
yes, i have tried many different headsets
the quality is fine
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
nottorious_91 said:
I have the exact same problem on my 4 month old X1, and now i dont rly know how hard i should wiggle with the stylus...
Click to expand...
Click to collapse
try waggling and then try inserting the headphones a few times and taking them out too
I've had the same prob for a week now.
After reading up on other HTC phones with the same issue I've found that what went wrong was a little hardware switch inside the jack failed to reset to its off position when the headphones where removed.
To locate the switch:
Turn the phone onto back so that the screen is facing upwards. The switch is at the 4-5 o'clock position if you look directly at the headphone jack, at around 1cm in.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I inserted a small pin which was bent a little at the end to relative position I have described and after I felt it snag just gave it a small wiggle. When doing this I noticed the headphone icon would disappear for a second and return.
This is how I knew I was in the correct position. Then I gave it a good twist.
(I think anti clockwise, but you will know from which direction worked when you wiggled)
The headphone icon disappeared for good and now I'm back to normal phone use!
(Do this at your own risk! But its more precise than sticking the stylus in blind)
kamilanglia17 said:
thank you guys, i also think that i should return it for vodafone service..
i tried in fmradio and still no working
Click to expand...
Click to collapse
DO NOT RETURN IT. This happened to me once, and ONLY once after using the phone for like 6 months. I soft reset and nothing happened.
There is something wrong with the way the device toggled the connection. Just replug and unplug and press play and pause on your video/music player. It should purge sooner or later.
You can also hard reset your device you will find that the problem will most likely purge.
@Charcobeans: Thanks, it worked within 5 seconds Thats just the instructions I searched for. Waggling around did not work, but more precise it was easy. Thanks!

Galaxy Tab Back to Froyo STOCK from GB Stock

I think I've Bricked to completion now!
I have been using Overcome ROM and had issues with battery performance and other items. So I decided just to go to stock GB. Well I did and I thought to myself, why not get really good battery use and go back to Froyo. So I downloaded from samfirmware.com the JM2 ROM. Well, I did just that, using Odin 1.7 and it showed "PASS" in green. Normal pit file and reset partition checked.
Will not turn on at all and won't even go into "Download".
Besides the obvious "BRICK OF THE YEAR AWARD" replies, does anyone have any help they can lend?
I'm not the one with the answers, but I casually saw these two posts hours ago:
How to unbrick tabs:
http://forum.xda-developers.com/showthread.php?t=1133590
This unlocks bootloaders so your SamFirmware.com rom won't brick you:
http://forum.xda-developers.com/showthread.php?t=888071
Thanks for the help, with the link you provided. I called the guy that I got my simple mobile phones from(and my tablet sim from, too) and he said he could fix it. So I left work immediately. Well after about 10 minutes, he said, "Here you go, the LCD screen is fried"
So I'm really bummed, but I'm also hopeful cause I can get a new LCD installed from ubreakifix.com. They are the same people that I got the new 3.5mm jack and repaired the Tablet, just about 30 days ago. So even though I'm bummed, cause I just got it fixed, I'm very hopeful that I can get it fixed, I just have to come up with some money for the part.
Can you try plugging it in the Computer and wait for while and see if anything shows up?
When i soft bricked my tab after a failed odin attempt it wouldn't turn on or nothing. I left it plugged into the computer, started to youtube a bit and after sometime pasted a phone and pc screen popped up.
Try it because if the lcd screen fried i would think the LED buttons would atleast light up if it was on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P999 using xda premium
i got this screeen a few days ago,
i re plugged the device in the computer flashed the pit, pda and phone files with odin about 3-4 times and finally worked
good luck!
Yeah seen that screen many times. No worries. Just get the pc to recognize it BC heimdall and Odin are your options.
fabricatedhero said:
Can you try plugging it in the Computer and wait for while and see if anything shows up?
When i soft bricked my tab after a failed odin attempt it wouldn't turn on or nothing. I left it plugged into the computer, started to youtube a bit and after sometime pasted a phone and pc screen popped up.
Try it because if the lcd screen fried i would think the LED buttons would atleast light up if it was on.
View attachment 835218
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App
Bam-Bamm said:
Thanks for the help, with the link you provided. I called the guy that I got my simple mobile phones from(and my tablet sim from, too) and he said he could fix it. So I left work immediately. Well after about 10 minutes, he said, "Here you go, the LCD screen is fried"
So I'm really bummed, but I'm also hopeful cause I can get a new LCD installed from ubreakifix.com. They are the same people that I got the new 3.5mm jack and repaired the Tablet, just about 30 days ago. So even though I'm bummed, cause I just got it fixed, I'm very hopeful that I can get it fixed, I just have to come up with some money for the part.
Click to expand...
Click to collapse
Looks like you're not very lucky with your tab.
Then again you're lucky you have this kind of service (ubreakifix) in the States, coz we're stuck with the overly expensive regular services from companies like Samsung, Sony Ericsson, Motorola and so on, and they not only fix nothing but also charge you for that. I wish there were alternative services like this here too.
Hey thanks you all! I'll attempt plugging the unit into the laptop tonight and pray something happens.
I've actually connected the unit to Odin and Odin recognizes the unit, by show the COM:0, but I'll try the laptop at home. This all failed at the office PC.
Yah try that first because if loading a new rom doesn't do anything then yah something else is wrong.
So atleast then you know its hardware not software. If odin recognized the phone then there is hope. There are times the tabs go into what's we call a coma state and it usually clears up by loading a new rom. So atleast odin sees it.
It took like 20min for my tab to turn on with that phone to pc screen. If nothing comes on but odin sees it...load the overcome gbsafe_v5 rom and if you get green light then wait for it to reboot
Sent from my LG-P999 using xda premium

Categories

Resources