Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
brianbelfast said:
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
Click to expand...
Click to collapse
M8. I don't think you're on your own on this one. I have the same problem ...or similar. My phone pairs OK but drops the blue tooth connection usually on audio but quite often altogether. Re-pairing is a pain in the A$$. It's definitely a phone issue as I have the older qtek and a nokia that work with my kenwood system without a hitch but pair up the diamond and I'm pulling my hair out after 5 minutes.
I've tried the latest stable radio, setting pin code to 0000 & also turning off security but it still drops connection after an outgoing or incoming call.
Does anyone have a fix for this?
...and jetware 1.3 doesn't solve this either. Installed it the other day and pretty much the same ...audio is fine until a call is terminated and then it drops A2DP but sometimes stays connected on telephone. Other times both drop off!
bt stack
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
My phone does that weird thing too where I couldnt hear the other person on line. I have manage to found a quick fix for it tho.
Solution 1: During the call (when you notice you cant hear the other person), press the middle circle button (which will activate the screen if dimmed out), then press the speaker icon. This allows you to continue the conversation on speaker with the other person on line without having to soft/hard reset.
Solution 2 (works sometimes): During the call, reduce the volumn, wait a secnd or two, then raise it again.
Bt3030 - Shb6100/7100
Have the same problem with Philips shb7100 and shb6100. i also have tried the Jabra BT3030.
I used and test them on a Tyten and wizard no problem at all.
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
ADD+ said:
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
Click to expand...
Click to collapse
I have the exact same model (kenwood dnx8220bt and XDA ignito (diamond), same problem where everything is okay but when you go into the contacts menu and try to make a call, BT connection either drops or nothing happens when you try to make the call.... this is a joke.... how can my old HTC P3300 work with it without a problem and this newer Diamond flop like a fish...
any updates or news??
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
I join the list - having problems with my xcarlink which used to work with my P3300
Tried using A2DP Toggle which helped on the artemis but seems to have NO effect at all on Diamond
The Diamond does connect flawlessly to my jabra earpiece and my Sony ericsson bluetooth speaker
ninja_pimp said:
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
Click to expand...
Click to collapse
I have the same problem. Sent my HTC back twice for repair but still no solution. The first time they didn't found the problem, the second time they replaced the speaker.
What did they do with your phone to fix it?
According to this thread http://forum.xda-developers.com/showthread.php?t=431826 it is a hardware issue. The phone needs to go back to the supplier as it is faulty.
What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
i second that also
this key doesn't answer the incoming call
is there someone else has this problem ?
anyone actally used the handsfree kit?
The wired one? I use mine all the time, answers calls here, and a double press makes it dial last number..
hi, i'am also having the same issues.
the silver button does not pick up calls.
has anyone found a solution for this?
I have the same problem
I live at HK
I have been to the Service Center,
But denied it is the handfree fault but the rom bug..
I argued with them, then changed to a new handfree,
but the problem still there....
Hi everybody,
I'm new here and very grateful for all the brilliant solutions you guys come up with to all sorts of issues with x1.
I have the same problem with my hands-free: the button doesn't work and neither does the microphone. Until now, I've thought of it as a simple matter of replacing the hands-free kit, but now I see the suggestion that this is a Rom bug! Will anyone be able to elaborate a bit on this?
thanks and best regards,
Sune
Really not sure it is real or not that is a rom or software bug,
but sure quite a number of problem of people experienced such problem!
I hope SE not to put a death ear on this issue.
It is really annoying as I quite often used the handfree.
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
seljean said:
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
Click to expand...
Click to collapse
The first time i got to know the headphone dosen;t work in answering call, I really feel astonished. It is such a basic function of phone, how can the genius of SE dose not test it. Do them think we will buy another handfree???
Really disappointed of SE.....
swazpurohit said:
What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
Click to expand...
Click to collapse
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
same case here. im really disappointed...
i guess that if i can when asus glaxy came out i will change mi xperia for that one... this phone is really "buggy"...
Same probleme here unfortunately.. I tried to remove all
additional programs related to dialing and volume,
switched to the new ROM, but no changes. Button on headset
does not work and microphone neither.
I also have same issue, both HK new stock ROM & cook rom also.
i'm form India, had purchased Xperia X1i and using Airtel network. when i connect my hands free and attend one call the moment second call come, automatically my loud speaker gets activated.
is any facing the same problem in Indai or any where else? will any one help me this.
is there any solutions?
squarecircle said:
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
Click to expand...
Click to collapse
even i facing the same problem.
is there any solution
The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially!
Click to expand...
Click to collapse
Samething here, and the above works for me too (Remove and re insert), but SE really need to fix this for us.
I believe it's a hardware problem, bad 3.5mm jack!
My right earphone's volume has fallen to one tenth. I have it for less than a month. Good listening but bad manufacturing quality.
Personally I don't think it's bad hardware, I think it's bad firmware/rom.
Currently, with GENERIC UK ROM R2AA010, three presses of headset button dials last number, long press disconnects. Not tried incoming call yet.
I really need to be able to customize this buttons function, especially to activate Voice Command, so that I can make calls, play music etc, without the need for touching the phone. Only then, will I be able to make a button for the handlebars on my motorbike.
Want to use a fully wired system to save on battery power, rather than bluetooth. Also, in all the years of using bluetooth, I have yet to find a combination of handset and headset that work seamlessly.
So far, not impressed with the lack of functionality of this headset, but can see why it works like this. Essentially SE should have included Voice Command, then this hardware/software combination would have been shipped working effectively. I think it is merely a cost saving exercise and SE need to provide a patch and fix in their next rom release.
Hi!
ive tried searching but all i can find is usually incall voice problems requiring bluetooth or wired headsets.
my problem is the complete opposite. most of the time, when i use the phone to answer a call (without wired headsets or bluetooth) the person im talking to can barely hear my voice. i have to literally shout for them to understand what im saying.
ive tried placing the pda and phone volume to max level already but it doesnt solve the problem.
is there anyone who experienced this same problem? any tips? thank you for taking the time to read this
Hi,
ive the same problem. my voice goes as interrupted to the person i talked. But i can hear clearly everyone i talk.
ive tried radio rom 1.14, 1.16, 1.17, bu all the same.
Is there anyone know, hor can i fix this???
hey guys quick question.... im trying to find a way to get my bluetooth to work with my skype on my tab...
i really want to get it where i can speak and hear from my bluetooth but i wouldnt mind if i only could hear from my bluetooth and i talk into the tabs mic.
i already can hear with the bluetooth but for some reason it turns off the mic on the tab so the person at the other end cant hear me but i hear them.
ive read you can configure the audio.config or hack it some way to get it to work but i cant find out how.
if anyone could help that would be great!!
Thanks,
Zach
When I try calling other people I hear them but they cant hear me. Usually happens after I use the bluetooth. Any ideas?
Im currently using oxygen1rom. Im stumped.
Anyone here?
Still have the same problem of the mic suddenly not working and just having static when recording or taking calls. Please if anyone has any idea or input