Related
Hi Guys,
I did some research here and on google but couldn't find any good results.
I really have a serious lag in my keyboard, more likely at the repeating characters like, hello or whoohoo ... wil be like helo whoho, ...
Is there a fix or something else. When typing emails this result in a lot of frustation. I don't know how you guys think or experience this problem!
Thnx for you comments.
it's been brought up before but might be hard to search on...
Others have reported that turning off Word Completion and Auto Correct have helped.
Settings --> Input ... Word Completion tab
Give that a shot.
I have the same problem. I've turned off input completion under settings -> input -> word completion and in programs -> xT9 Settings. But when I type the letter A, Q, O, and L it tries to auto complete. Also Z is displayed as X. I installed the AT&T Keyboard fix from TaurusBullba and nothing changed. I am using Dutty_s_hybrid_Rom_Build_18533 Final on an AT&T tilt. Thanks for the help.
I've got the same issue. I've turned off Word Completion, etc. but it didn't seem to make a difference. Guess I need to slow my thumbs down...
Yes, the lag is quite annoying at times. It seems to be less of an issue when less programs are running. But I noticed the problem is not as bad since I stopped using Windows Media Player (which I would run all the time) and started using Audio Manager.
L8
With me the lag was even bigger after I had installed the HTC Touch Keyboard cab, which also xt9. After removing it got a little better (but still there's lag)...
So i guess there is no 1 solution for this keyboard lag? I'm also faced with the same problem I can finish typing my sms about 4 to 5 words faster then it can appear on the screen.
Anybody found a solution?
It might seem irrelevant but it obviously affects any consecutive keystrokes:
Start -> Settings -> Buttons -> Up/Down Control
If you put the delay to minimum, it seems to make things a lot better.
On the contrary, the "turning off autocomplete" solution didn't work for me.
Even though I think this should help you guys as well, I'm kind of pissed off that one has to use workarounds for such an expensive device to work properly. Especially when it comes to the keyboard which is among the top 5 reasons for buying it in the first place. I'm aware of the argument that this kind of thing happens with all WM devices, but still this seems close to unacceptable for me.
All the best
dsyro said:
Even though I think this should help you guys as well, I'm kind of pissed off that one has to use workarounds for such an expensive device to work properly. Especially when it comes to the keyboard which is among the top 5 reasons for buying it in the first place. I'm aware of the argument that this kind of thing happens with all WM devices, but still this seems close to unacceptable for me.
Click to expand...
Click to collapse
I totally agree, especially for a product that costs €600 or more! Nevertheless it's with all WM and HTC devices, and... has your pc never crashed or do you use a WindowsXP pc which has no tools or addons?
dsyro said:
It might seem irrelevant but it obviously affects any consecutive keystrokes:
Start -> Settings -> Buttons -> Up/Down Control
If you put the delay to minimum, it seems to make things a lot better.
On the contrary, the "turning off autocomplete" solution didn't work for me.
Click to expand...
Click to collapse
This appears to have fixed it for me, thank you!
This seems to have fixed it about 90% of the time. Sometimes when typing "www." it will end up ww. but that is only part of the time.
Thanks!
Mine sped up somewhat when I did the repeat rate change, but I REALLY noticed a difference when I removed the 3G dial pad and rebooted, seems everything is running faster now, but knowing my luck its a tease and it'll just go back to normal
dsyro said:
It might seem irrelevant but it obviously affects any consecutive keystrokes:
Start -> Settings -> Buttons -> Up/Down Control
If you put the delay to minimum, it seems to make things a lot better.
On the contrary, the "turning off autocomplete" solution didn't work for me.
Click to expand...
Click to collapse
Very odd, but it works for me. Thanks for the tip!
Up/Down control setting change worked for me too. Now the only problem is I actually get 3 letters sometimes!
Axman said:
Up/Down control setting change worked for me too. Now the only problem is I actually get 3 letters sometimes!
Click to expand...
Click to collapse
Maybe decrease the key repeat rate?
SWEET
the up down to a minimum seems t work for me. any suggestions as to which screen keyboard is better to use then the one in the rom my thumbs are to fat and its hard to use the keyboard when im driving. I knwo tis not safe but everyone does it. i guess it would be safer If my kaiser had bigger screen buttons for ppl with chubby fingers. LOL
thanks in advance.
juanitto
Hi Juanito,
Don't think it's your chubby fingers - we all suffer from it. I've heard people talk about the PCMKeyboard. On the last Roms i've tried, it didn't work, not sure why. I am currently running a ROM that has the Diamond keyboard, which I like too. The only thing I have to get used to is that it has two keys on each button (similar to for instance Nokia) but it is QWERTY (see here http://forum.xda-developers.com/showpost.php?p=2199341&postcount=15)...
Regards,
Nika.
I do also have the same problems with the whole touchscrenn input.
after some time working around, somehow all inputs have a delay. so for example when I am trying to close a program, the X (to close Prg) animates to be pushed half a second after I clicked on it...
or when I am trying to switch between tabs, it seems as the cpu is hanging somewhere around 100% and you have to repeat your input more times or try to push harder on the screen etc... until the inputs has been accepted.
is that a known issue? its very annoying...
only thing that helps is to softreset the device... but after some minutes the effect starts again...
to dr-house: your problem might be related to the 'htc task manager', especially versions 2 and higher. Disable it's auto start-up and see if you see any improvements.
how do u disable the taskmanger on startup and do the 3G txt thing??
My phone has been silencing itself randomly for some reason. I'll leave the phone for a while, and come back to it and have missed calls, sms, etc. and don't even know it because the phone has been silenced. I have had this problem on the last two roms from dutty. I always hard reset after flash. I do not have any programs set to silence my phone at certain times of the day, as this happens randomly.
Today before a class I had closed out a program and was just looking at the home screen and watched the sound/volume icon at the top just switch by itself to mute!
This is driving me nuts, I can't figure out why! Please help!
Thanks in advance.
I can't help ya, but it's happening to me as well...
Similar thing here. Had that happen on Dutty's. On LCS now, and instead the sound level from Microsoft Voice randomly goes off entirely so I can't here it confirm my request...really annoying
this happens to me sometimes when i switch the vibrate function on and off, and im using the AT&T Rom too
Same here...
Same thing has been happening to me since I switched to Dutty's ROMS. Could it be because of the new HTC Home plugins?
I remember seeing that it you are BUSY (outlook schedule) that the phone will silence itself if you have that in your settings.
I have also seen this happen with voice talk - where it misunderstands what you told it to do ("Call Tom Smith" and it thinks that you said silence the phone or something like that )
My best guess would be the first thing I suggested - are you using schedules on your phone?
Bill
In my case, it usually doesn't drop the volume itself to zero, but sometimes when switching from mute to normal volume, the phone soundbar remains at zero.
Simularities were reported over here.
This generally happens when you have selected automatic ringer setting in HTC Home
I don't have the automatic ringer setting set.
Yes, I am having the exact same problem as in that other thread.
I guess this thread can be closed and moved on to:
http://forum.xda-developers.com/showthread.php?t=352906&highlight=drop+volume
I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...
I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.
No issues with the official AT&T ROM either.
wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.
Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.
Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.
I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.
I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!
zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.
Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.
No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.
I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.
NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.
Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?
Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..
SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!
TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.
Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...
wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...
rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?
chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..
I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...
i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!
I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.
Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.
Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..
I ran the site and its fine why do you say its a phishing site?
I would have added this to the thread, but it would get lost in the endless amount of posts that come per minute. Disabling SD Card Notifications does not disable them, enabling and disabling again does not disable it either. Even with the volume completely off when you plug in the phone to charge it notifies you via ringtone. Very annoying
If this is how you're doing it, maybe you should keep the first post update with verified bugs and there fixes (if there is one) as they are reported. This way damaged' thread will be less cluttered and people won't have to wade through hundreds of pages of posts to find something.
good idea but don't forget... SEARCH = WADE RELIEF
Mine works just fine. I dont get a ringtone when I plug my phone in and the volume is off...
Im sorry, but my trackball is still intermitent. I thought it was supposed to be fixed?
And my broswer hangs on the last leg, even though the page is fully loaded, I have to press stop.
?
mountaindont said:
Im sorry, but my trackball is still intermitent. I thought it was supposed to be fixed?
And my broswer hangs on the last leg, even though the page is fully loaded, I have to press stop.
?
Click to expand...
Click to collapse
You sure its not working. Its light sensitive so that may be the case.
david279 said:
You sure its not working. Its light sensitive so that may be the case.
Click to expand...
Click to collapse
Its light sensitive? Hm...didnt know that. Could very well be my issue, is there a way to turn it off? I liked in 1.5 how it came on by just moving it. Let me know my phone was responding and just....brought a sense of comfort I can never explain. I guess maybe being jealous over it whilst having the g1.
Another issue I am having is at the lock screen. Before this update if my phone was locked, you press the power key and then either swipe your screen down, or press menu to unlock. Now whenever I press menu, it unlocks but automatically pulls up the menu on the home screen. Not a huge issue and definitely not complaining, just wanted to let you know.
has anyone else had the issue where you answer an incoming call and there is no sound on your end or their end. and the only fix is to restart your phone?. it is very annoying. i found this in testing but it stopped. now its starting up again today
Bump
I know i annoy you all with my trackball b!tching, cause its no big deal to anyone else, but to me, I could live with all the original bugs if the trackball was constant.
Also, friendstream? I didnt see it in the rom, and cant find it, and idek if it works in damages latest release.
Total noob question, but the only reason im interested in friendstream is because, to be honest, idek what it IS. Link fb, ms, and twitter tkgether right?
I'm having trouble with VVM, when you call and vm answers it asks for the number your calling and the # and then says it doesn't recognize try again.......I tried google voice but it won't even go to VM at all......
wsucoug09 said:
Another issue I am having is at the lock screen. Before this update if my phone was locked, you press the power key and then either swipe your screen down, or press menu to unlock. Now whenever I press menu, it unlocks but automatically pulls up the menu on the home screen. Not a huge issue and definitely not complaining, just wanted to let you know.
Click to expand...
Click to collapse
I don't have this problem. How many people are experiencing this?
officer629 said:
I don't have this problem. How many people are experiencing this?
Click to expand...
Click to collapse
Just broswer lag and trackball for me. Could i reccomend a fresh wipe and flash?
Bump again:
Trackball light sensitivitt settings?
I just tested my voice mail and found something odd...
When I get my voice mail notification, I also get a text message saying "Android has sent you a Sprint Voice Message. Call 408-970-0000 to listen.
MMSN,
c645518a1548,V^aORG3gDHGY//CM"
Very weird and a little annoying.
Dont know why people are having issues with vvm. Mines worked perfect everytime. Fresh wipe and flash?
Bump AGAIN
You have my permission to flame me...after you help lol...
officer629 said:
I just tested my voice mail and found something odd...
When I get my voice mail notification, I also get a text message saying "Android has sent you a Sprint Voice Message. Call 408-970-0000 to listen.
MMSN,
c645518a1548,V^aORG3gDHGY//CM"
Very weird and a little annoying.
Click to expand...
Click to collapse
You can turn that off by disabling sms in settings......
officer629 said:
I don't have this problem. How many people are experiencing this?
Click to expand...
Click to collapse
I am. Re-flash and clear data in HTC settings didn't fix.
mountaindont said:
Dont know why people are having issues with vvm. Mines worked perfect everytime. Fresh wipe and flash?
Bump AGAIN
You have my permission to flame me...after you help lol...
Click to expand...
Click to collapse
It's not that it doesn't work, cause it works fine. Theres just this added text message that I never had before.
officer629 said:
It's not that it doesn't work, cause it works fine. Theres just this added text message that I never had before.
Click to expand...
Click to collapse
Oh! Lol, just disable sms notification. I apologize.
Bumpbumpbump
Mine still doesn't work tho...........