I have an HP iPAQ hw6515e with a new battery. It was working fine until I changed the outer case to black.... While it’s on charge the red light is on but once its unplugged, the red light go out. I press the ON/OFF button and nothing comes on. I re-opened the case and checked all connections and they seemed to be fine. Can someone help me?
ur Back cover is switcher
the original back cover of iPaq 6515 has pin to push a microswitch inside the unit. may be ur brand new outer case doesn't have "extra pin". try to use ur original outer case.
Hi, after days of searching here and the www. Help in this situatin is much appreciated, I replaced screen ribbon due to fault when pushing out keyboard (screen having lines or black). Now phone vibrates on power up, after a few miniutes when keyboard slid out keyboard lights up only , nothing else works.
Tried hard reset, obviosly blind due to no screen. Replaced old ribbon but same fault?? activsync also not connecting.
Eventually sorted it, Ribbon was damaged. Replaced with another purchased ribbon and now functioning correctly HoooRay
Hi i have had an x1 since august but within a month its been dropped and then it was unable to show the screen, i opened my device to try and fix my problem but messed with nothing whatsoever, when i put everything back together it wouldnt even turn on anymore! all it did was charge and when it was fully charged there was a red light. can anyone help me? please im desperate to fix my phone. My first paycheck was spent on this and i loved it despite the numerous flaws! also i havent charged it in over 2 - 3 months. Also when i opened it the tape that connect the rear and the front is kind of messed up, would that effect anything?
The tape that connects the front and the rear is the cable for the screen, so if it's messed up, you might need to get a replacement.
here is a pic, the red part where its circled is where i think the problem is, it looks ripped off, i did have a hard time opening and putting it back together the first time also.
Sounds like (Or rather, looks like) you're screwed, as far as I can tell, if it's really ripped. Otherwise attempt to clean the contact points with some cleaning alcohol and Q-Tips - something might have made it's way in when you disassembled the unit and blocked the electrical signals.
ill try it, but if that doesnt work, would i be able to replace the flex ribbon? would acteone work?
got this checked out by my friend, he told me its the flex ribbon cable, thanks for the help btw. Does anyone know the cheapest place to get a flex ribbon cable from?
Still would like confirmation if its my flex ribbon cable before i spend 40 bucks on a new one. thanks!
Hi, I am new to this forum. Sorry for posting here but I think I have similar or same problem with my xperia. Few days ago I drooped my xperia and then I could not turn it ON. I opened unit, the flex cable was detached.
After attaching the flex cable. I could turn the unit and it booted normal but no response on touching screen I even tried to align it but it did not respond. I turned off the unit. After trying turning it back ON only back light of the screen turned on (no sony logo, no xperia logo no winmo).
I tried to turn it on few times but same result. Even tried to soft reset and hard reset it but no difference only back light. Is it because of flex cable or because some thing else? I can`t even go in to 3 color screen. Please help. Sorry for my bad eng. Thanks.
Hi, I recently dropped my phone and now the screen is blank. When i turn on the phone the whole screen is blank, the phone vibrates when it powers on but nothing is visible. Even when i get calls i cant attend them. There are no scratches or cracks on the screen after the fall. This is the first time i have experienced this and any help is appreciated. Thank you
I think the LCD is connected to the phone's main board by a connector that snaps into place. If you dropped the phone, I think it's a possibility that this connector could have popped out. It would only take a few minutes to open it and check for this. http://www.youtube.com/watch?v=0A4zbBKkcKU Skip to 2 minutes and 50 seconds into the video and you will see this connector.
Unfortunately it's possible that when you dropped it, the LCD screen was damaged even though you can't visibly tell just by looking at it.
thank you very much will try it
Hi! Can anybody help me please? I replaced my mi9 screen and it was working perfectly. Second time I did it, I installed the battery connector before the screen connector. Now when I press the power button, I can feel it vibrate, which means it boots, but the screen stays black. Any ideas please, can it be fixed? Thanks in advance!!!