When starting a text message and you get to type in the name of the contact you want, normally it will suggest people from your contacts based on the name you type.
This has stopped working, does anyone have any suggestions on how to get it working again.
Could it be the Touch HD keyboard I installed, I know on my Kaiser it was to do with XT9. Do you think the same CAB will work?
i have the same problem too... and it occurs after i've downloaded the touch HD keypad. do you already have a solution to this problem? would appreciate your help. thanks.
Related
I installed the Palm thread app ripped from WM6 device board and everything works except sending MMS I keep getting out of memory errors. I made sure that the pic is under 300k but as soon as I hit Send I get the message. I'm with cingular/at&t. I have searched regarding this but I noticed that for some people it works fine and other not so its hit or miss. But I wanted to know if anyone else has tried to use this on there kaiser.
Thanks
i tried it and no, you cant send any MMS's (I tried some of the other varients found elsewhere on this forum but none work better). In fact I found that this app had knock on problems all over my TYTN II and slowed down the machine considerably. Since this isnt an app you can just remove I had to do a hard reset.
Thanks for the reply hopefully someone figures out a fix for the slowness and mms not working on the tytn II
No one else has tried Palm threading app on there Keiser yet? and has mms working with AT&T??
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
jhernand1102 said:
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
Click to expand...
Click to collapse
I am experiencing the same. Luckily I don't use MMS very much so if I absolutely need it I can Uninstall Threaded SMS and fetch the incoming MMS then re-install threaded sms. I had same issue with Cingular 8525..Too bad, this is the best threaded sms app out there to me. I can't understand why they haven't built a threaded sms app that comes pre-installed. So basic. Everyone uses SMS. What are they thinking?
any updates on this one yet? I miss my threaded SMS/MMS
**** it doesnt work for me either
****ing BS...please shogun mark, HELP!!!
i wanna stress how important this app is to me.....i was sooo ****ing excited to go from 8525 to kaiser. this actually almost makes me wanna go back.... even though the kaiser is soooooo much sweeter. im beggiing someone to please please work on a fix for this!! please
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
austinsnyc said:
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
Click to expand...
Click to collapse
Which version of Palm threading app are you using?? I have tried to setup the correct settings for the ATT mms part and still as soon as I try to send a mms i get the "out of memory error"
if anyone gets it to work they are brilliant...i have the shogunmark version from windows mobile 6
ttttttttttttt
It is a known bug in the app. Just be thankful we have what we have. To better understand, go here:
http://forum.ppcgeeks.com/showthread.php?t=621
Works for me. The Shogun version thats circulated around doesnt work. You need the full version. Do a search and you might find it. THe problems are the same on most WM6 devices, and not just the Kaiser.
P.S. Some f-in patience might make people actually want to help you. 6 posts, half dropping F bombs doesn't endear you to the community.
Temporary Fix
Well this is what I do to have palm threading and MMS working on my Tilt witch is something I have asked before but haven't gotten an answer but this is my crazy hack or whatever you want to call it.
My theory was well since the MMS portion for Palm threading is out of the question regarding a fix from what I have been reading about. I asked before If after you install palm threading is there away to enable again the default MMS application that came with the phone like that giving you the option to use palm threading for Txt's and sending MMS' to be sent by the default application witch i like better.
I have the files but I dont know where to upload them too but if someone can post them up I will send it to them.
Basically I managed to get me the cab installation of Arcsoft MMS composer ver 4.0.21.28 .. I noticed that tilt has a new version 4.0.3.?? anyways so basically this is what I did..
1) install Palm threading application - reboot device
2) Install Arcsoft MMS application - reboot Device
3) Install EnableMMS.cab - Reboot
4) Re-apply ATT MMS cab configuration so that MMS gets configured
Now when I press on the email key I get the option to compose a MMS and I can receive them fine..
Like i said this is something I just tried for the heck of it and it worked but I dont guaranteed it will work for everyone. I have tried this on the Tytn II and now I just received my Tilt and it works good.
If there was a way to just re-enable the MMS portion I think there wouldnt need to install the slightly older version of arcsoft composer viewer but I havent able to figure it out..
PS. I tried uploading the zip files but it keeps telling upload of file failed..
Can you e-mail me those files, please.
Hi, is someone able to upload these files somewhere?......thanks in advance
ok here they are.. Let me know if they work for you
http://rapidshare.com/files/61245824/MMSsetup.zip
Thanks doug0365, i will have to do a full backup first on my kaiser before i install the files......its missing the threadersms.cab though....but thats ok i found the file in the kaiser forum.......will report back later today of the outcome.....thanks again.
When i want to write a new message or adding a contact name, i can only type numbers. On compact qwerty i can only type numbers. On full qwerty i can not switch to letters, i can only see the number pad, and i cant switch to letters, it stays on the numbers. The only working keybord is the full one.
Any chance to fix this?
Same problem,
Anybody with an answer or the original cab?
Diamond Keyboard CAB
Attached is the Diamond Keyboard CAB.
Includes a few languanges, large qwerty etc...
Probably you missed the attachment?
Regards,
Carty..
i had same problem and what i did is reflash rom and now everything works perfect
Post is old, problem allready fixed!!!
I have this problem too but with the official HTC Rom 1.93.
After a hard reset it works fine few days and then, i got that bug and need to hard reset again to get it working back ... It's very annoying :/
Do i just need to install that keyboard package to fix it ?
skrap3 said:
Post is old, problem allready fixed!!!
Click to expand...
Click to collapse
tell me how!!!!!!!!!!!!!!!
I did a hard reset and then a regestry export of HKLM\Software\Htc\ezsip
and HKLM\Software\tegic
then did a backup-restore and changed the registry.
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Hi guys, I recently noticed that i cant use any of the stock keyboards for texting because when i try to type, it only shows as numbers or on the full qwerty keyboard wont let me go to the "ABC" view and wont let me use regular letters, or type. If anyone could help it would be great because its very frustrating!
I had the same yesterday, after updating to 2.03.404.3 NLD !
Don't know if it has anyting to do with this rom... I also changed some settings by diamond tweak. Today the problem is gone, but I don't know what caused it :-(
Bump, its still an issue till this day i need help fast!
Download and install this cab and you will be fine....
Here You Go...
Iyhab said:
Hi guys, I recently noticed that i cant use any of the stock keyboards for texting because when i try to type, it only shows as numbers or on the full qwerty keyboard wont let me go to the "ABC" view and wont let me use regular letters, or type. If anyone could help it would be great because its very frustrating!
Click to expand...
Click to collapse
Hi,
I had the same problem and for me it was an issue with T9 : you'll have to disable T9 SIP with Diamond Tweak and that bug will be over.
regards
Just want to say thanks to all the nice folks here - have joined up the other week after getting my new Diamond - but as yet have had no reason to post as any questions I could have had (including this one!) has been answered many times over!
Cheers!
I have just started to use criskelo's rom and have encountered a problem that i haven't come across in any other roms. I like to use the samsung default keypad when texting with predictive turned on but for some reason it won't work on this rom. Every time i try to use or configure it the keypad will still only type numbers and not letters.
Anyone got any ideas about what i'm doing wrong or have overlooked? I would appreciate any help.
Couldn't post this on the thread for his rom because of newbie restrictions.