Database Develop

Volume Levels

Hi Guys
I dont know if this is me but, it looks as if you cant change the system volume to the phone ringing volume. I know there is a tab over to change them both but the volume slider adjusts them both as the same time.
Im running an orange Diamond using
Orange Rom 1.37.405.1

Hi Sutt,
There're two volume settings: 1 for ring, 1 for system; I hadn't seen any UI that allows both to be set at the same time.
Under the Sound UI, you'll see the Ring Volume. Just "thumb" the screen up to see the System Volume. Or press the volume buttons to access the System Volume UI, and then immediately press the left arrow button at the top-left-hand corner to access the Ring Volume UI.
I set both to 80% most of the time. But when on wired ear-piece, I'll put system down to 5%; when in-door, ring to 60%.
Hope this helps.
Cheers.

Help: my diamond doesn't ring, but vibrate

Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Thx in advance for any input.

There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?

GeckoDev said:
There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?
Click to expand...
Click to collapse
i have same problem and its not the ringer volume setting. someone please help. im missing so many calls cuz of this. thanks

As already noted, sounds like you have System Vol up and have also gone into 'Settings/ Sound', and made sure phone volume slider is turned up.
I had the same problem for awhile, the two are linked, unless you manually turn the sound down (in Settings), then it will respond to the System level buttons only to the manually set sound level. I had inadvertantly turned my phone volume all the way down, thinking the System setting would adjust it to wherever I wanted it, not so and I missed some calls.
You probably have also checked to make sure the Phone ringer selection is not set to 'none'.

i had this same problem and i had turned everything up and still nothin..i did a hard restart and after that it worked

Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.

kienle+spiess said:
Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.
Click to expand...
Click to collapse
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!

TF3D settings tab > Sound > Notifications sound on

ang3l said:
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!
Click to expand...
Click to collapse
hhhhhhhhh
i'm too
I laughed a lot & I laughed a lot

Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Have the same problem, but I don't see any <, button or another sound/volume menu, pls anyone?

Htc touch pro not ringing
I haven't had a ringer in six months. Only vibrate. I have tried everything. I don't understand 'the arrow at the top of the volume' control. Is that the slide button on the side of the phone that has system/ring options?

hi.. i also had same problem..what i do was... copy ringtone to music in phone memory..and one thing only the cut edited mp3 can play.. i think.. mine now ok..

Ringtone problem

Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds&notifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.

There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH

ringtone problem
yea all 3 volumes are set to the max level

ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way

Have you got any profile managers installed (G-profile, Phoneweaver etc)?

ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you

Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.

Dialer keypad tones inaudible

I like to use audible keypad tone on the dialer and on my Note 8 i can barely hear them , and I have all volume levels including system at max.If anyone knows a fix for this I would be thankful ,I have tried various volume raising apps but none did anything to help .

Have you tried the sound settings and switching on the dialer tones toggle?

This one

Yes i have that toggle on but it is barely audible and i also have longer tone set for 3 seconds and it is a quick 1/2 second tone even when i hold my finger down on the keys ,1st phone i had a problem with this .

jameskoiman said:
I like to use audible keypad tone on the dialer and on my Note 8 i can barely hear them , and I have all volume levels including system at max.If anyone knows a fix for this I would be thankful ,I have tried various volume raising apps but none did anything to help .
Click to expand...
Click to collapse
Any chance you're covering the speaker when you dial? If not, have you tested your hearing to see if you have difficulty with the frequencies used for the keypad tones?

I encounter exactly the problem as jameskoiman. My dialling keyboard is no sound eventhough alr select for the dialling keyboard tone to ON.

Any fix for this? The same is on Galaxy S6.

Speaker probably clogged with belly button lint.
Sent from my SM-N950U using Tapatalk

This thread has been cleaned As well this was a old thread and reply was months ago there is never any need to revive old topics like this as all it does is start more issues..........

Nice phone but please help!? Driving me mad!

Got my Oppo find X5 Pro few days ago. I was using a OnePlus 8 before this and prior was a Google Pixel user.
Can someone help me with these 2 things...
1. Is there anyway to use the power button as the power off button or just I also press volume up?
2. I loved the alert slider on the OnePlus handsets and I only ever use silent or vibrate modes. Never use ring tones. However I can't see a vibrate only mode on this handset.
I have around 10 days to return this handset. Whilst the power off is not a deal breaker the second thing might be.
Thanks guys!

Any takers?

OnePlus2Oppo said:
Any takers?
Click to expand...
Click to collapse
Vibrate only can be achieved by using the little bell in the notification quick actions... long press configures it ... in there there's a slider to activate vibe on silent ... the bell then acts as a silent toggle but will vibrate
And no - the vol + power is only want, at present, to get to the shutdown menu

Lovely thanks