Database Develop

QTek 9090 Rom Update Dead

Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny

i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]

Danido said:
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
Click to expand...
Click to collapse
Danny, check my reply at http://www.pocketpc-club.nl/forum/showthread.php?t=45319&page=3
Grtz,
DUTCH

Serial 2.06
dear Danido,
i got the same issue and i got over it.
u need to go to search and find this file:
PDA2k_CDLWWE_11222_169_10200_SHIP
then do the installation while your ppc is in the cordl with power supply.
good luck

helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "

You cant post personal info...
muppet said:
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Click to expand...
Click to collapse
[email protected]
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Reply With Quote
Click to expand...
Click to collapse
Erase your email if you want to share your mail to anybody pm them please. maybe you can find out the answer but if you post here please ask by this way i know is slow... but many people can check the answer if you all post all the process.

[email protected] said:
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Click to expand...
Click to collapse
since you already have a problem, please use windows xp for now.
i would try to actually downgrade to stock ROM first (please refer to wiki to get the correct stock from your device)
secondly, i would try
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

xda IIi problem

Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks

you go to bootloadder and uprom again
goog luck

It doesn't sync with the pc anymore though.

Won't sync, but if you plug it in, and see the screen on the pda change to something like USB, it's connected.

It's connected, but when i go to update, it says country id error.

find this file at the ftp "MaUpgradeUt_noID.exe" and use it to upgrade

I fixed the problem by reflashing the rom using the ma_upgradeUt.
Thanks to everyone that helped

xda2i dead
hello
the solution seems very good to resolve the problem i have , but i cannot see any link to domnload the fix....
after aplying update ROM on my XDA2i (Qtek 2020i) i had a black screen with serial and V 1.01..
please advice
thanks

My XDA Dead
my O2 XDA IIi do not boot and it displays is "Serial V.1.01"
Please Help Me ?

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks
Click to expand...
Click to collapse
I'm in the same boat...
I think I'm in the process of reflashing the ROM.
I have a message, " Checking the information on your device, Please Wait"
how long should this whole process take?
Thanks

Time for an update
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.

captirwin said:
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.
Click to expand...
Click to collapse
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins

A Little More Info, Please
skeeve666 said:
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins
Click to expand...
Click to collapse
Please go into a little more detail. I go to Windows Task Manager, click on the "Processes" tab but unable to find the "installer program." Thanks...

I tried with my o2 2i XDA but it gets up to 2% then says there is a radio update error. HELP And does anyone have the 1.10 radio update?

well wn i faced this problem in my i-mate pda2,i asked the i-mate support ppl n they sed there wz no way other than dwnloading the original rom n re-installing it,so i guess u guyz hv 2 do da same in ur O2z.this problem happens becoz a simpl 'stik at bootloader' program is loaded in ur extended roms,n remember that extended roms are LOCKED.

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Tried the same but dropped during update & now xdalli is completely dead. Read light comes on if in cradle with no battery.
Knowledge is very basic. Any suggestions apreciated.
Rgds
Click to expand...
Click to collapse

Error 246 Device not responding

I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.

I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks

wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67

wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!

wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...

Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo

Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...

Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more

thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo

Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)

Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo

fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help

I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk

Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome

I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb

Data corrupted, contact us for help for try again later

Hi All, I'm trying to run Hard-SPL on my Touch Pro2 , however, I got this error message:
Data corrupted, contact us for help for try again later (after 1 hour)
Is there anybody know why and how to fix it?

xcelebric said:
Hi All, I'm trying to run Hard-SPL on my Touch Pro2 , however, I got this error message:
Data corrupted, contact us for help for try again later (after 1 hour)
Is there anybody know why and how to fix it?
Click to expand...
Click to collapse
lol, i got the same error, I just did it again, and it worked.

Problem resolved!!! I changed to another PC!!

Problem solved.
Please post in the Hard SPL thread in future.
Dave

pls help urgent. tmobile stuck on SPL mode after upload ROM.

PLS HELP!
I flashed rom now phone stuck on SPL area ( 3 coluor) and it says " your OS ROM isn't customized for your hardware."
what to do. my phone is Tmobile MDA Basic. I upload HSPL. SPl is now : 2.00.cmon
I uploaded 2 rom one is: RUU_Opal_hTC_Asia_WWE_1.35.720.2_infineongsm4.1.13 .66_03.29.90_Ship
and other is: OPAL_original_ROM_1.35.xx.xx
pls need to revive the phone urgent. client makes problem. any help!
best regards

KUBAT1 said:
PLS HELP!
I flashed rom now phone stuck on SPL area ( 3 coluor) and it says " your OS ROM isn't customized for your hardware."
what to do. my phone is Tmobile MDA Basic. I upload HSPL. SPl is now : 2.00.cmon
I uploaded 2 rom one is: RUU_Opal_hTC_Asia_WWE_1.35.720.2_infineongsm4.1.13 .66_03.29.90_Ship
and other is: OPAL_original_ROM_1.35.xx.xx
pls need to revive the phone urgent. client makes problem. any help!
best regards
Click to expand...
Click to collapse
See if you can perform a hard reset. We have a detailed procedure of reseting the device. Hope a hard reset works for you.

Hard reset procedures