XPERIA Ringtone Volume - XPERIA X1 Q&A, Help & Troubleshooting
Hi all,
I searched the forum and didn't find someone else asking the same question, so if someone else did then I did a bad job searching the forum.
I just got my XPERIA yesterday. I am not facing problems with it yet, maybe in some time I will but as always SE will find solutions for the problems (hopefully).
My main concern here is the ringing tone volume, does anyone else find it low even when the tone is put to the max. I also got the SE C905 for my other line, and it's the same with all my SE phones the ringing tone volume is good leave the volume 5 and the sound is heard pretty well when the phone is not near me. The reason I want the sound louder is because a lot of time my phone is on my desk and I am talking to someone in the office, or even when I'm home I leave it in my bedroom and go to the kitchen, the volume in the X1 won't help much. I read on another forum one of the users playing with something in the registry to make the ringing tone louder but didn't say how.
Can anyone help me out here??
Thanks in advance.
having the same problem.. the volume is really low when at max...
was hoping someone possibly finding a solution to this
try this it fixed the problem for me
right, same problem here... I tried to tweak the \Windows\audiopara.csv file for sound volumes but is REALLY different from the touch or raphael
patterns said:
try this it fixed the problem for me
Click to expand...
Click to collapse
does this break the volume control?
Hey guys,
I actually have the opposite problem. When the system volume on my X1i is FULL, it seems to 'clip' really bad and the sound is distorted. I therefore my leave my volume at 80% max, and sometimes it still sounds 'tinny' and distorted. I think this is because the speaker is quite crap, as my HTC Universal had much better sound.
billybob, I would just double check that while you're holding the phone, you aren't covering the speaker hole with your hand. It is VERY easy to do so, and this HUGELY affects the quality/volume of the speaker. In case you were unaware, the speaker is on the bottom left side of the phone.
Interested to hear what others think about this, but I can tell you that I do NOT have low volume for sure.
If it's your ringtones only, then you might want to look into editing the .wav/.mp3 file and increasing the levels that way. I always make my own ringtones, and I find that sometimes I need to increase the dB levels a bit more than normal.
theres already been a couple of threads on this, you do need to edit the correct audiopara file, have a search for audiopara on my username
patterns
I downloaded and installed the HTCVolume.cab file on my X1. Did a soft reset too. Now what next? I dont see any new program or any change in the volume? Am i missing something?
I did the same, nothing's there. I will try searching for the audiopara solution maybe it will fix the problem.
http://forum.xda-developers.com/showthread.php?t=443276&highlight=volume
I dont think its a general volume problem. It seems the Xperia is playing custom mp3 ringtones quieter than the standard ringtones that came with the device.
It doesn't have to do with the ringtones because I am using my own ringtone and on my X1 it's low whereas on my other SE C905 it's normal.
Now for those of you who didn't solve this yet, here's what I did and it worked for me thanks to our friend fards.
P.S.: I am not responsible for any defection in your phone using my method. You should do this on your own responsability.
Download fards's AudioPara3_XC_Vodafone_V5.zip which I reuploaded or if you have the original one which I have you will have to download AudioPara3_XC.zip. It's the same file but one for vodafone and the other for original ones that are not locked to one company which is my case.
Now go to your X1 to Windows folder, you have either AudioPara3_XC_xxx.csv if your phone id locked to one company or AudioPara3_XC.csv if you have an unlocked phone. If you can't see these files press menu them show all files to view them. Now copy this csv file and put it somewhere on your desktop as a backup copy.
Unzip the csv file in some folder on your computer. Now download one of these files, which will allow you to copy the csv file to your mobile. Normal file explorer will not allow you to overwrite the csv file on the phone.
http://www.ghisler.com/pocketpc.htm
or direct cab file http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
After you install the software go to your Xperia open the software, navigate to Windows folder got the the AudioPara3_XC file and remove the read only option for the file. Now put your downloaded csv file to your phone (not to Windows folder, you can't paste it there). Using the total commander, navigate to where you copied the new csv file, then copy/move this file, and put the destination \Windows\ then soft reset your phone and you're done.
BTW after resetting the phone, the voice control interface changed, I don't know if it's due to the new csv but it kinda looks cool .
Thank you fards for the help
ehajj
thanks for the help. Just a few queries before I go ahead.
1) Will restoring the original AudioPara3_XC_xxx.csv file to its original destination will make the phone as it was before or its a irreversible process?
2) Does this increase the speaker volume (for tones) or only the earpiece volume?
Thanks for your prompt help!
Hi Moleculez,
1) The purpose of backing up the original file is to be able to restore the phone volume to its original state, so yes it's a reversible process.
2) I noticed an increase in the speaker volume and that's what I wanted in first place. For the earpiece I don't know yet as I just got my X1 on saturday afternoon so I am still Xperiencing with it.
I'm Having a slight problem, here, wonder if anyone can help.
I'm using total commander, trying to remove the read-only attribute from the .csv files in my x1/windows folder.
I touch and hold the file, and select properties, then clear the read-only checkbox, check the change checkbox, and click now.
Upon reselecting the.csv file, and opening properties, it is still read-only.
Am i doing something wrong? should i soft reset at this point to change the attribute?
Any help much appreciated, as i'd love my X1 to be a bit louder.
By the way, its a generic UK X1. (CarphoneWarehouse 02 unlocked/unbranded)
astral1 said:
I'm Having a slight problem, here, wonder if anyone can help.
I'm using total commander, trying to remove the read-only attribute from the .csv files in my x1/windows folder.
I touch and hold the file, and select properties, then clear the read-only checkbox, check the change checkbox, and click now.
Upon reselecting the.csv file, and opening properties, it is still read-only.
Am i doing something wrong? should i soft reset at this point to change the attribute?
Any help much appreciated, as i'd love my X1 to be a bit louder.
By the way, its a generic UK X1. (CarphoneWarehouse 02 unlocked/unbranded)
Click to expand...
Click to collapse
why are you trying to remove the read-only status of a file in rom?
Overwrite the file with the new one, the old one will not be deleted, the operating system will just use the new one instead. If you don't like it delete or rename the new file and after a soft reset the original file will be restored.
ehajj said:
After you install the software go to your Xperia open the software, navigate to Windows folder got the the AudioPara3_XC file and remove the read only option for the file.
It was this part from an earlier post that caused me to try doing what i was trying.
Anyhow, i will try it your way, Fards, and thanks for the help.
Click to expand...
Click to collapse
ehajj said:
It doesn't have to do with the ringtones because I am using my own ringtone and on my X1 it's low whereas on my other SE C905 it's normal.
Now for those of you who didn't solve this yet, here's what I did and it worked for me thanks to our friend fards.
P.S.: I am not responsible for any defection in your phone using my method. You should do this on your own responsability.
Download fards's AudioPara3_XC_Vodafone_V5.zip which I reuploaded or if you have the original one which I have you will have to download AudioPara3_XC.zip. It's the same file but one for vodafone and the other for original ones that are not locked to one company which is my case.
Now go to your X1 to Windows folder, you have either AudioPara3_XC_xxx.csv if your phone id locked to one company or AudioPara3_XC.csv if you have an unlocked phone. If you can't see these files press menu them show all files to view them. Now copy this csv file and put it somewhere on your desktop as a backup copy.
Unzip the csv file in some folder on your computer. Now download one of these files, which will allow you to copy the csv file to your mobile. Normal file explorer will not allow you to overwrite the csv file on the phone.
http://www.ghisler.com/pocketpc.htm
or direct cab file http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
After you install the software go to your Xperia open the software, navigate to Windows folder got the the AudioPara3_XC file and remove the read only option for the file. Now put your downloaded csv file to your phone (not to Windows folder, you can't paste it there). Using the total commander, navigate to where you copied the new csv file, then copy/move this file, and put the destination \Windows\ then soft reset your phone and you're done.
BTW after resetting the phone, the voice control interface changed, I don't know if it's due to the new csv but it kinda looks cool .
Thank you fards for the help
Click to expand...
Click to collapse
WARNING
the file posted for NoBrand X1 attenuates excessively the volume during calling if you use headphone, so for me is not usable...
i've had to re-overwrite to the orginal one
My wife got her X1i yesterday and I played around with it and the sound volume is great and the clarity is superb. So I don't know what this is about.
try to use a custom mp3 as ringer and you will know what we're talking about
Related
How to make custom 'Keyboard Sliding Sounds'
Want to create your own keyboard sliding sounds?WM6 comes with three by default, and you can't add custom ones... Or can you? Using a registry editor, nav to: \HKLM\Software\HTC\SlidingSound There are 3 keys: 0,1, and 2. These represent the three current sounds: piano, xylophone, and whatever the third is. Make a copy of one of these and name it 4. Inside 4, set Default to the name for your sound. Then make the In and Out point to the appropriate wav's in the Windows directory. Soft reset your device, then go to Start > Settings > Keyboard Sliding Sounds. Your new entry should appear in the list. Hope it helps!! Ryan
And do you have cool sliding sounds for download. I already searching a long time for cool ones. Regards, Tommy
Yeap Indeed, Can someone please link us some sliding sounds??it would be very helpfull for the p4350 community
Well, after downloading a bunch of free sound FX, I've chopped them up and sped them up/slowed them down... Here's a few to try. I think they're pretty cool, better than the built in ones at least... Ryan
I know ya gotta love the Transformers.
the transformers sounds are really cool. i did speed them uip slightly and lowered the volume
guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories? I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste. I also can't copy my sound from my mem card to any windows directory. I'm totally new to WM and making mods to my WING...any help would be greatly appreciated! Cheers!
yeah i dont understand how this works either do you guys think you can make more explained instructions thanx
VooDoo1 said: guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories? I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste. I also can't copy my sound from my mem card to any windows directory. I'm totally new to WM and making mods to my WING...any help would be greatly appreciated! Cheers! Click to expand... Click to collapse It seems like you try to make a classical PPC copy paste by the tap and hold and you're not supposed to act that way. Be sure to use the Copy/Move option in the File menu to do so. Good luck.
Googeling for star trek original series door sound.... psssscheek
foxenesys said: It seems like you try to make a classical PPC copy paste by the tap and hold and you're not supposed to act that way. Be sure to use the Copy/Move option in the File menu to do so. Good luck. Click to expand... Click to collapse I did try the copy/move option...still not working? Let me ask you guys this, once I select the item...and then do copy/move...and find the place where I want it to be...how do I then put it in that spot? Im getting really frustrated because I dont understand what Im doing...I love my Wing tooo much to give up though! Blaah...this is what happens when you go from Linux phones to WM..haha
hey DaMyth said: I know ya gotta love the Transformers. Click to expand... Click to collapse i love the sound effects! thanks a lot dude!
Why not just edit the already existing sound effects.. like inside the folder 0 you can edit the in and out entries.. like on my hermes I edited '0' folder in registry to be the transformers sound by editing in with value data of my documets/slider4_in.wav and out with my documents/slider4_out.wave
For those having trouble following this guide, I have one at the HoFo Forums. Should be real easy to follow. http://www.howardforums.com/showthread.php?t=1195063&highlight=Sliding+Sound+Guide
My Take For those of you who are having trouble creating amd understanding the reg file, any easy way to do it is to just edit the ones already listed. That really is just the easiest. Just make sure you copy your wav files into the Windows folder on your device. And for a treat, my sounds; a Lightsaber!
VooDoo1 said: guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories? I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste. I also can't copy my sound from my mem card to any windows directory. I'm totally new to WM and making mods to my WING...any help would be greatly appreciated! Cheers! Click to expand... Click to collapse i guess the easiest way is to 1) download the wav-files and rename then to 3_in.wav and 3_out.wav (the number 3 depends on the number of previously installed sounds) 2) edit the registry on your device (as instructed in the 1st post) 3) connect to activesync. 4) explore your device, go to the windows directory (on the device). and then copy the .wav files into the windows directory. 5) restart the device 6) edit sliding sound settings and it should work
WTF...am I doing wrong Try as I might (I am regedit savy!) I still can't get this trick / hack / addon to work. Reg settings seem fine, softreset...nothing...???? WHY Sound files in windows work perfectly as I've run them directly from a command line address so I know they are pointed to correctly within the 2 paths. Any help would be appreciated.
SHORTCUT i first copy original wav to sd. then use the rename trick. right click on original name and select rename. then using the touch screen keyboard press the ctrl key + c. then take the sound u want to use and right click it and select rename. then use touch screen keyboard and press ctrl key + v. now that u have rename ur new sounds with the original name, hightlight both in and out sounds and copy them too the windows folder, overwritting original sound. then go to settings and change sliding keyboardsounds with the original name of one u over written.
are there any programs to allow for slider sounds for the mda???
i have the star trek sounds PM me if you want tehm
audiopara.csv files
I am having difficulties trying to apply the audiopara.csv files on forum to make my htc diamond ring louder. it tells me to replace the audiopara.csv files in the windows directory. 1) they are all read only files and cannot be changed? 2) even when I found installers to change the files for me, when i applied those settings, there is no difference in loudness at all! 3) I also found a file called audiopara3.csv?? to conclude, how do i change the settings to make my phone ringer louder as I most of the time cant hear it ringing at all!!
Can't change Ringtone....
I'm running HTC Home on my tilt...Today I changed my default ringtone from a mp3 file to another mp3, but it didn't change.... I can play the files, so I know the files are good, but it will not change in HTC Home or under the system>sounds & notifications.... Anyone know what I need to do?
Firstly, make sure that your mp3 files are associated with wmplayer otherwise you cannot play mp3's as ringtones, secondly make sure that your mp3's for ringtones are placed in the device/rings folder. That should sort it out.
I moved the file to the rings folder, but it still changes back after I close the sounds window. The ringtone that it is currently using is a mp3 file in the My documents folder. How do I check to verify the program mp3s are associated with?
amac64 said: I moved the file to the rings folder, but it still changes back after I close the sounds window. The ringtone that it is currently using is a mp3 file in the My documents folder. How do I check to verify the program mp3s are associated with? Click to expand... Click to collapse Can you go into the file explorer i nthe programs folder, then browse to the mp3 you want to use as a ring tone, hold the stylus down on the file and select "set as Ringtone" from the drop down list. What does that do?
amac64 said: I moved the file to the rings folder, but it still changes back after I close the sounds window. The ringtone that it is currently using is a mp3 file in the My documents folder. How do I check to verify the program mp3s are associated with? Click to expand... Click to collapse That's easy. What file explorer app do you use? If you use Total Commander (Freeware), then you can associate all mp3's with WMPlayer The WMPlayer icon should show on those files, then you know what app it's associated with. You go File>Properties, select the Associate tab and then select WMPlayer from the Device\Windows directory. In Resco Explorer, you Tap and Hold file for a pop-up menu and then Open>Open with, and then select WMPLayer.
mskip... It's says "the file has been set as your current ring tone."... but it doesn't do it. MACkjam.... I use just the file explorer from WM 6.1... the ringtone it's set on is a mp3 file so I would assume it has the proper assoc.. I deleted the mp3 file that was set as the ringtone... it moved down the list to the next mp3 file and now I can't change it...... I have tried changing the ringtone via: 1. File Explorer 2. HTC Home tab 3. System>sounds In system>sounds, every time I try to change it, it looks like it's changed and then I can go back to see, it's just like before. In HTC Home, it allows me to select another, but it never changes......
Is there a place in the registry I can make the change?
amac64 said: Is there a place in the registry I can make the change? Click to expand... Click to collapse Does it allow you to set non mp3 RingTones? eg. the ones that came on the rom.
no, it is currently set as Ring-WindowsMobile.....I can't change it to anything else.... HTC Home still has the ringtone as mrbeannokia, but the system settings has the Ring-WindowsMobile.... It seems that I can change other sounds, like email and MMS sent... Could this be a problem with HTC Home?
amac64 said: no, it is currently set as Ring-WindowsMobile.....I can't change it to anything else.... HTC Home still has the ringtone as mrbeannokia, but the system settings has the Ring-WindowsMobile.... It seems that I can change other sounds, like email and MMS sent... Could this be a problem with HTC Home? Click to expand... Click to collapse I have had the similar problem...haven't found the solution to this day.....but there's a workaround delete or move the ringtone which you're using now(ring-windowsmobile - [if it's in rom then you might have a problem deleting it...in that case backup your files...hardreset your phone and check if you can change ringtone on clean rom]) and then you should be able to assign a new ringtone. I've notice that the problem doesn't occur on "clean" roms so most likely some application is screwing up your "Feng shui"
Thanks Arturo... The ringtone is on the ROM, so I can't delete it.....I was hoping I could avoid a hard reset.....
amac64 said: Thanks Arturo... The ringtone is on the ROM, so I can't delete it.....I was hoping I could avoid a hard reset..... Click to expand... Click to collapse Well in that case you could try to search for a program which allows deleting or renaming files in rom.(I'm not sure if such a program exists at all but it's worth trying if you don't want to hardreset your phone)
amac64 said: Is there a place in the registry I can make the change? Click to expand... Click to collapse Yes; here: HKCU\ControlPanel\Sounds\Ringtone0 - edit sound ie: Code: *vibrate* is equal to vibrate. Code: \My Documents\My Ringtones\*put song/ringtone file name here* " is the default file location.
Thank you zeezee...but I had hard reset my phone before I read you message.... after the hard reset, I installed all the programs I had before and tried changing my ringtones after each...every thing worked fine, until... This morning, I could change the ringtone, but it would change back after a phone call, so I looked at everything that could set my ringtone and decided that Phone Alarm was the problem... I removed it and now everything works correctly.... I appreciate all the help y'all gave me.... Andy
hi im having the same problem wheneber i change the ringtone in the file explorer it says it has been set as my ringtone but it never changes. i did the registry editing and same thing did not change at all i dont know what else to do i copied the ringtone in both folders windows/rings and My Documents/My Ringtones and i got nothing i cant even see the mp3 files
kratos2027 said: hi im having the same problem wheneber i change the ringtone in the file explorer it says it has been set as my ringtone but it never changes. i did the registry editing and same thing did not change at all i dont know what else to do i copied the ringtone in both folders windows/rings and My Documents/My Ringtones and i got nothing i cant even see the mp3 files Click to expand... Click to collapse Well if you cant even see them...you might have a problem
zeezee said: Well if you cant even see them...you might have a problem Click to expand... Click to collapse lol yeah that is a bugger What Rom are you using? Is it a stock rom or a cooked one? If it really bothers you that much then it might be worth just flashing a new Rom rather than spending your time trying to figure it out.
go in the registry and change the HKEY_Current User> ControlPanel > Sounds and deleted the key of FileSizeLimit.
MACkjam said: Firstly, make sure that your mp3 files are associated with wmplayer otherwise you cannot play mp3's as ringtones, secondly make sure that your mp3's for ringtones are placed in the device/rings folder. That should sort it out. Click to expand... Click to collapse I am having a problem even getting WM Player to update the Library with the songs from the storage card. It only shows my device as an option and not the storage card. I have taken out and re-inserted the memory card, but still nothing.
Same problem here, but different device.
Ringtones
I have the emobile touch diamond, Japanese version. I cannot figure out how to set my mp3s as a ringtone. It will only let me make .wma format into a ringtone. Can anyone help?
The easiest way to set an mp3 as your ringtone would be to do it from within HTC audio manager. Play your mp3 file in audio manager, click on menu-->Set as ringtone. Trim your file to play not more than 40-45 seconds since most carriers cant play a ringtone longer than that. After you trim it, select set as default ring tone.
Even if I play the track in the HTC audio manager the menu does not show "set ring tone" only allows me to add to playlist, properties, ect.
Hmm......ok. Do this, take your mp3 file...and save it in the following location. Using file explorer go to my documents-->my ringtones. Save your file here. Now go to start-->settings-->personal-->sounds and notifications-->notifications-->incoming call. You should be able to see your mp3 file in the drop down. Good Luck.
[email protected] said: Hmm......ok. Do this, take your mp3 file...and save it in the following location. Using file explorer go to my documents-->my ringtones. Save your file here. Now go to start-->settings-->personal-->sounds and notifications-->notifications-->incoming call. You should be able to see your mp3 file in the drop down. Good Luck. Click to expand... Click to collapse that works.. but if you hooking your phone to the computer using activesyne.. they have an option when you first sync it to see if you want to sync music as well... if you did that.. your Phone My Document folder will show up on the desktop.. and you should be able to see a folder name My Ringtones there.. copy and paste the ringtons you want in there.. and now just go back to your phone.. under Notification.. you should be able to see your ringtones under the drop down like syedimran said
Ya, something is different because it is a Japanese rom. It does have a ringtone folder, but the name is in Japanese. Even if I put files in there they do not show up in setting/personal/sounds and notifications/notifications/incoming calls drop down menu. It is very strange.
Might I suggest flashing a nice clean english rom then. Its gonna save you a lot of rework and its easier this way. Ofcourse the choice is all yours.
How would I go about flashing the rom? Would everything else work ok?
Shogunichi said: How would I go about flashing the rom? Would everything else work ok? Click to expand... Click to collapse Flashing a new ROM would cause everything other than the stuff in your internal storage deleted. You can backup call history, sms, e-mails, contacts using this program call PIM Backup (search it on the forum you will see it, or go under the ROM development section click on the Dutty 3.5b Final post and in the first page he has a link to PIM Backup) Just follow the instruction from the Dutty 3.5b Final post and you will know how to flash a new ROM of course you can also choose other ROMs of you choice but the same instruction applies to all ROM
Microphone sensivity with audiopara.csv?
So finally we can use our Shift's as a phone! After using it for some days I get complaints from people I talk to on the phone that they don't hear me very well. The mic sensivity is a bit too low. I've spent some hours to try to find what registry entries to change, and I found someone talking about audiogain, but there are no audiogain keys in my registry (I'm using i00's 9/3 ROM). EDIT: I have also tried the other phone based ROMS out there. Same problem - People complain about not hearing me very well. I tried to open the audiopara.csv file from windows folder of theShift, but the values here are hard to understand. I'm wondering if the file audiopara.csv is possible to edit to change the sensivity of the mic? Or the Audiopara3.csv
The INC_MIC or INT_MIC might be the lines in the Audiopara.csv or Audiopara3.csv files which needs to be edited. But it is hard to understand what to change the values into. If we can understand how to change these values, my guess is that the microphone sensivity can be changed easily. The files are write protected so you have to use Totalcommander to copy them back to WM6 after editing. A good way is to copy them to Vista - edit them - rename them to forexample audiopara.new.csv - copy them to WM6 - and then rename them to Audiopara.csv or audiopara3.csv using Total commander. If you just copy them you will get error message (they are write protected). If someone tries, please post findings here
Hi again everyone! I am pretty sure it is the Audiopara.csv or Audiopara3.csv files which has to be edited, but I don't know how to edit the values in these files. I have a strong feeling that the ....MIC lines in this file has to be edited, but I don't know how to change them to raise the mic sensivity. Here are the three lines in Audiopara.csv which I have a strong feeling that can be edited for a higher mic sensivity level A8,CE_REC_INT_MIC,35,1,36,0,37,FF,38,0,39,3,3A,0,3B,0,3C,8C,3D,8C,3E,0,3F,0,40,0,41,1C,42,1,43,0,44,0,45,0,46,0,47,0,48,0,49,0,4A,0,4B,0,4C,0,35,1,36,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 B23,CE_REC_INC_MIC,0,0,5,4000,4000,0,4000,4000,422,0,0,190,0,320,320,320,0,0,7F,0,300,300,3000,0,0,7F65,0,780,FF9A,1B0C,F333,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,0,68,743E,6,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,FFFF,FFFF C8,CE_REC_INC_MIC,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 Click to expand... Click to collapse Or maybe any of these lines from the audiopara3.csv? B23,CE_REC_INC_MIC,0,0,5,4000,4000,0,4000,4000,422,0,0,190,0,320,320,320,0,0,7F,0,300,300,3000,0,0,7F65,0,780,FF9A,1B0C,F333,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,0,68,743E,6,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,FFFF,FFFF B24,CE_REC_EXT_MIC,0,0,5,4000,4000,0,4000,4000,422,0,0,190,0,320,320,320,0,0,7F,0,300,300,3000,0,0,7F65,0,780,FF9A,1B0C,F333,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,0,68,743E,6,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,FFFF,FFFF C8,CE_REC_INC_MIC,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 C9,CE_REC_EXT_MIC,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 F23,CE_REC_INC_MIC,5,4000,4000,0,4000,4000,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,7fff,800,7fff,149f,0,14,800,2000,2000,fa,46,1,2ff,40,20,4650,40,41a0,800,63,4DFF,4DFF,1,4a38,1770,0,100,100,400,200,400,300,258,190,1ca8,1c2,2ee0,fa0,FFFF,0,0,0,0,0,0,0,FFFF,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F24,CE_REC_EXT_MIC,5,4000,4000,0,4000,4000,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,7fff,800,7fff,149f,0,14,800,2000,2000,fa,46,1,2ff,40,20,4650,40,41a0,800,63,4DFF,4DFF,1,4a38,1770,0,100,100,400,200,400,300,258,190,1ca8,1c2,2ee0,fa0,FFFF,0,0,0,0,0,0,0,FFFF,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F25,CE_PLAYBACK_HEADSET,5,4000,2D4E,0,4000,4000,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,0,ED00,0,0,7F65,0,780,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,7fff,800,7fff,149f,0,14,800,2000,2000,fa,46,1,2ff,40,20,4650,40,41a0,800,63,4DFF,4DFF,1,4a38,1770,0,100,100,400,200,400,300,258,190,1ca8,1c2,2ee0,fa0,FFFF,0,0,0,0,0,0,0,FFFF,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F28,VT_HANDSFREE_VOL0,0,2861,4000,0,390A,2D4E,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,6000,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,3F00,7D0,0,100,100,200,200,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FF4A,FF0A,FE4E,F954,F1AB,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F29,VT_HANDSFREE_VOL1,1,2861,4000,0,390A,4000,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,6000,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,3F00,7D0,0,100,100,200,200,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FF4A,FF0A,FE4E,F954,F1AB,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F30,VT_HANDSFREE_VOL2,2,2861,4000,0,390A,5A67,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,6000,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,3F00,7D0,0,100,100,200,200,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FF4A,FF0A,FE4E,F954,F1AB,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F31,VT_HANDSFREE_VOL3,3,2861,4000,0,390A,7FB2,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,6000,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,3F00,7D0,0,100,100,200,200,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FF4A,FF0A,FE4E,F954,F1AB,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F32,VT_HANDSFREE_VOL4,4,2861,4000,0,390A,B45F,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,32F4,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,4A38,bb8,0,C8,100,400,500,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FD87,FC9A,FBAD,FCE6,FD93,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF F33,VT_HANDSFREE_VOL5,5,2861,4000,0,390A,FEC9,FFFF,3FD9,0,C80,FF9A,1F00,F333,01EC,FFEE,200A,7F65,0,ED00,0,FFFF,3FD9,0,C80,FF9A,1B0C,F333,01EC,FFEE,200A,7F65,32F4,800,7fff,179f,0,14,2000,2000,2000,80,8c,2,190,40,20,36b0,40,41a0,800,63,4DFF,4DFF,2,4A38,bb8,0,C8,100,400,500,200,300,258,32,1ca8,300,800,fa0,FFFF,0,FD87,FC9A,FBAD,FCE6,FD93,3C90,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,2,2,2,FFFF Click to expand... Click to collapse Are these values HEX values? Can someone give me some advice? Any help appreciated!
Are you sure you got differences when trying a new file? There is no entry in the wavedll registry linking to this file.
Thaihugo, Yes Im sure I tried the Diamond audiopara3 file found in the csv's attachement in this thread: http://forum.xda-developers.com/showthread.php?t=430029 This is what I did: 1. Installed Total Commander for ppc 2. Downloaded the CSV's attachment 3. Renamed the included Audiopara3.csv to audiopara3new.csv in Vista 3. Copied this file over to the Windows directory on the ppc 4. Renamed the file to Audiopara3.csv to overwrite the copy protected file 5. Soft resetted the WM6 side of the shift By replacing the original audiopara3.csv file with the one from the thread above showed me that the sound volume is greatly increased. I tested it by opening settings ---> Sounds and Notifications ----> Tab: Notifications and playing different sounds. I have tried this 2 times now and I am certain that the file changes the volume level on the Shifts WM6 side. I can't explain why this works, but it sure does! However, I don't know how to increase the microphone sensivity level! I guess editing some of these lines will do the job. EDIT: I have now tried to make a call with both Audioparafiles (the original and the one I linked to in this thread). I can confirm that the mic sensivity is also different with the two audiopara3.csv files. The original audiopara3.csv has better sensivity level for the mic than the one in the csv's. What do you think, Thaihugo?