Problem doing hard reset - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

Hello,
I don't know why i cannot perform it.
Are there some roms that don't let the reset to be performed?
I push through the hole with the pencil and switch on at the same time. This thing worked before, but I don't know why it stopped and now i have 5 office folders and a lot of error in my himalaya.
Anybody with the same problem?
Danke

if you have wm5 ot later you have to enter the bootloader and choose clear storage and reg hive

to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.

Thanks Ather. It worked perfectly.

ather90 said:
to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
Click to expand...
Click to collapse
Thanks ather90, it realy works

Related

Himalaya hang on boot screen

Hello, moments ago I tried to install an app which I assume was designed for windows mobile 2003, I think it was a bit of a stupid idea..
Anyways, it looked like the install shell (within the ppc itself, because I executed a .CAB file) hung.. so I did a soft reset..
Well, the conclusion is, my Himalaya hangs at bootup now.. is there anything I could do to make it boot again?
thanks
himalaya finally boots
lol no problem
I fixed it.. woahh!! that was worrying..
For future reference however, I did the following method:
Reinstalled the OS, with the origional TofClock install files, once that made no difference, I did some more browsing of this site and did this again:
----------------------------------------------------------------
3. Hard reset your pda.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts
(taken from one of the tutorials that came with the TofClock install manual' I've seen it posted by a user named helmi_c)
-----------------------------------------------------------------
But anyways I'm glad that's over, now I only know one contact but I'll live..
i would have replied but my internet was down...the procedure u followed (by helmi) should have been ur priority...any way glad that ur problem is solved..
Mods please lock this topic

Help!!

I have install one of roms WM 6.0 from here on my MDA II and it was working. Then I've found a polonisation (cause I'm from poland) to it, and I installed it. MDA stopped working . I can turn it on but it stopping on the startscreen and I can't do nothing . I was trying everything- cold reset and even WM reinstallation. How can I turn it back to life?? plz help
P.S Sry for my english
Did u follow all the instructions correctly...Try to go into Bootloadermode (the basic settings to start the flashing) after that You have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Yeah, it's working now, thanks !!
you are most welcome

Serial v2.07

I tried to upgrade my SPV M2000 fromWM2003 to WM6 and that happened. I'm using Vista, just telling you because some of the guides I looked at for fixing that were specifically for Vista but they didn't work. Anyone any ideas? I don't mind having to stick to WM2003. Please someone HELP!!!
If someone helps me could you go through everything from how to get it out of the state it is in now to upgrading/downgrading to WM6 or WM2003 with links and stuff please. And if you can help could you add me on msn please. [email protected]
try this link
http://forum.xda-developers.com/showthread.php?t=291723
Yea, tried that, no luck. I'm not sure how to update the driver.
Johnathan1707 said:
Yea, tried that, no luck. I'm not sure how to update the driver.
Click to expand...
Click to collapse
Do not put your XDA into the cradle yet....
1. Download USBAS file and extract to Desktop
2. Right click on My Computer.
3. Select Device Manager.
4. There should be one with Windows Mobile or something like that.
5. Update driver and slect USBAS file you extracted.
6. when completed insert device.
There you go
It isn't listed in Device Manager unless it is in the cradle.
I got it all sorted .
Glad to hear it....
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/ That's where I got the fix from .
You should start this as a new post
Don't suppose you want to help me find a WM6.1 ROM and help me install it, or point me to some instructions. Any that
I have found have had lots of download lonks and loads of other stuff I'm not sure about, the one that's on atm was just a siple double click and next job.
Johnathan1707 said:
Don't suppose you want to help me find a WM6.1 ROM and help me install it, or point me to some instructions. Any that
I have found have had lots of download lonks and loads of other stuff I'm not sure about, the one that's on atm was just a siple double click and next job.
Click to expand...
Click to collapse
Hi,
this has the link with the walk through
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
This has the ROMS
http://forum.xda-developers.com/showthread.php?t=403421
Install the ROM then the ExtROM
Thank You.
Here is the guide
Temporary Remove your SD Card (it may work for you with the SD card still in your BA, but better to be sure)
Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button
Connect the phone to the sync cable/cradle.
Now you can upgrade the ROM using BaUpgradeUt.exe / MaUpgradeUt_noID.exe
When the upgrade is completed, you must perform a Hard Reset
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
Your upgraded ROM is now running!
During the first boot the CAB-files from "EXTROM" folder will be installed

can any one help me

hi to every one i just want to thanks you gays work this great job,but i need a little help,I have i-mate pocket pc phone edition it was with wm2003 I updated with wm6.1 but not working well so i try another version but same 6.1 now it works well but it shows me 3 media player,3 search,3 options of help,and down the screen it shows a line with color,so what i should do pl help.
best regards from me
sorry if I posted in wrong sesion
try to hard reset using this method :
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
ather90 said:
try to hard reset using this method :
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
IT WORKS THANKS BRO THANKS VERY MUCH
THAAAAAAAAAAAANNNNNNNNNK YOUUUUUU
You are welcome..but next time first read the "readme"
Hey, "ubejd," I'm glad you got it working!
T'was so simple for Ather.

irretrievable ERROR?PLZ help!!!

After cooking the new rom with my p3700 with 100% finished,but it sudddenly
comes as a error.Then i try to softreset it and now,the phone stuck on the bootloader screen .Its totally irresponsive to any action,not work in cooking a rom with my pc nither restoring it.any solution?FORGIVING ME I'm fresh.
.
kit03190 said:
After cooking the new rom with my p3700 with 100% finished,but it sudddenly
comes as a error.Then i try to softreset it and now,the phone stuck on the bootloader screen .Its totally irresponsive to any action,not work in cooking a rom with my pc nither restoring it.any solution?FORGIVING ME I'm fresh.
.
Click to expand...
Click to collapse
Have you tried a Hard Reset?
Have you unlocked your device first?
mr.horndoctor said:
Have you tried a Hard Reset?
Have you unlocked your device first?
Click to expand...
Click to collapse
I have tried hundred times to Hard Reset.And it's not working.
unlock my device?I'm not sure.I've just cook a non-official rom to my device.
for the first time.and met this sreious problem.ORZ LOL
Doesn't matter what you did. If you can still get into bootloader then you can flash from there. Either flash a stock ROM or use mtty to flash another ROM.
supersanj said:
Doesn't matter what you did. If you can still get into bootloader then you can flash from there. Either flash a stock ROM or use mtty to flash another ROM.
Click to expand...
Click to collapse
i think so .yet my device doest not response my PC at all'
Here's what you need to do before you connect your usb cable to the diamond:
1. Download MTTY from here:
http://forum.xda-developers.com/attachment.php?attachmentid=208457&stc=1&d=1248437219
2. Download any ROM you want
3. Right click the ActiveSync icon and click "Connection Settings"
4. Untick "Allow USB Connections"
5. Now hold the volume down button and press the reset using the stylus.
6. It will come up with the tri-colour bootlader screen and at the bottom it should say "serial".
7. Connect the usb cable and the "serial" should change to "USB"
8. Run the MTTY program.
9. Select "USB" from the "Port" Dropdown menu. Then press "OK"
10. Press the "Enter" key on your keyboard to get a prompt.
11. Type "set 14 0". and press Enter.
12. Type "task 29" and press Enter.
13. Hold the Diamond in your hand and get ready to press and hold down the volume down key. Don't disconnect the usb cable.
14. Type "task 8" and press Enter. This will restart the phone so as soon as you press Enter press and hold down the volume key to get into bootloader again.
15. It will show "USB"
16. Flash the ROM you downloaded using the RUU.
17. After the flash do a hard reset (volume down and centre buttons pressed then reset using stylus. When prompted select "volume up". Don't press the "volume down button as it will also delete your internal storage.
18. You're done.
supersanj said:
Here's what you need to do before you connect your usb cable to the diamond:
1. Download MTTY from here:
2. Download any ROM you want
3. Right click the ActiveSync icon and click "Connection Settings"
4. Untick "Allow USB Connections"
5. Now hold the volume down button and press the reset using the stylus.
6. It will come up with the tri-colour bootlader screen and at the bottom it should say "serial".
7. Connect the usb cable and the "serial" should change to "USB"
8. Run the MTTY program.
9. Select "USB" from the "Port" Dropdown menu. Then press "OK"
10. Press the "Enter" key on your keyboard to get a prompt.
11. Type "set 14 0". and press Enter.
12. Type "task 29" and press Enter.
13. Hold the Diamond in your hand and get ready to press and hold down the volume down key. Don't disconnect the usb cable.
14. Type "task 8" and press Enter. This will restart the phone so as soon as you press Enter press and hold down the volume key to get into bootloader again.
15. It will show "USB"
16. Flash the ROM you downloaded using the RUU.
17. After the flash do a hard reset (volume down and centre buttons pressed then reset using stylus. When prompted select "volume up". Don't press the "volume down button as it will also delete your internal storage.
18. You're done.
Click to expand...
Click to collapse
I am able to cook a new rom now.but failed and it said corrupted image.how can deal with it?
What ROM kitchen are you using?
supersanj said:
What ROM kitchen are you using?
Click to expand...
Click to collapse
thanks for helping!my problem is solved!
one problem is left....
the ram always used above 90%hard to do anything.
kit03190 said:
thanks for helping!my problem is solved!
one problem is left....
the ram always used above 90%hard to do anything.
Click to expand...
Click to collapse
Open File Explorer and navigate to Task Manager in the main Windows folder and click to open. Then click on the right softkey and highlight view and then click on processes.
Then you can see what processes are running and what is using up ram.
Then use an app like CleanRam or MemMaid to stop/close processes and reclaim/free up used ram.

Categories

Resources