Help needed GPRS and WIFI don not work!!! - Tilt, TyTN II, MDA Vario III General

Please please help me. I have Kaiser and I am not able to connect to GPRS or WLAN. I ve tried many ROMs and none of them seem to work. I have manually entered GPRS settings and I cannot connect. When I plug USB cable then I am able to surf on internet. WLAN I can detect but cannot surf. I now that there is mistake either in ROM or in some settings since I find it hard to believe that mobile like Kaiser isn't able to do so. I am from Croatia if it helps. Could someone guide me what is the best thing do or I need to take my phone to service?
Thank you in advance!!!
I must say that on some ROMS WIFI has worked but on none of them GPRS worked.

look in the WiFi settings and turn it to best performance.

manually entered gprs settings?
why did you do that? it wont automatically detect them?

Related

cant browse internet through activesync

I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
m623d said:
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
Click to expand...
Click to collapse
when i am at home i have to put my connections on My Isp.. when i am at work due to the firewall i have to use Work Network.. and i can surf just fine through activesync
Depending on what ROM you have, check if it has a proxy setting in your Connections tab.
latest tmobile rom.
has proxy settings, but not set, shouldn't need to.
so no one else has a problem with the latest activesync?
I'm on T-Mobile USA and i'm not having any problems with ActiveSync (Version 4.2) and T-Mobile's latest 2.26 ROM.
Can you post more information about your setup, both PC and MDA? As it could be a configuration issue.
Activesync works fine, syncs all my stuff no probs. Just cant use the internet.
I thought you could just open pie and it would automatically connect?
Can't get to internet using activesync
I can sync, but cannot update pocketweather. Any ideas?
Same problem, internet doesn't work for me at all.
Gosh dunno why I'm having such a hard time with the internet working. On my first 8125 everything went fine, internet work with activesync and wi-fi without setting anything. But now I can't seem to get them to work at all with 2 newer 8125. Try Mr. Clean rom, Molski, summitter, format my computer. None was able to get my internet back? Can anyone tell me what setting did they put inorder to get thier internet thur activiesync and wi-fi.....thou I thought it should just automatically be the same as my comp ADSL ....like before, plug and away I can update weathers and surf net?
Anyone out there, got there internet working smoothly like I had in the first time?
might have the answer, worked for me.
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
But what about eMail?
I have my TMO MDA set up for a Comcast eMail account. When I go GPRS, the eMail works fine.
But when I use Activesynch and my USB cable, I get "Cannot connect with current connection settings...."
Also, is there ANY way to have eMail give me the full message the first time, rather than requiring be me to click on the full message and reconnect?
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
I've been having the sync without passthrough for about 2 months now.
Great. When I try to go into "USB To PC" the application basically crashes. Does anyone know the registry edit that would be needed to disable advanced network functionality?
-AnarchE
thanks!
I've had a sync issue and the issue where passthrough internet didn't work for 2 months. This little change fixed both.
Thanks.
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
Also check Active sync, File -> Connection settings -> this computer is connected to: -> The Internet.
This did the trick for me, now it's updating perfectly.

cant browse IE on kaiser thru active sync connection

aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.
any having the same problem? is there any one with a fix for this...
sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.
mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.
I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!
I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.
i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.
installed Opera and still no hope.
my tytn II is out of the box, not on any contract with an operator. can any one please help me..

3G/GPRS instead of Wifi/Wlan

Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz
You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings
I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!
how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me
That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!
I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.
I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.
Moderators are working with the same

Wireless ON & GPRS keep connecting

Hi,
I have a problem with the GPRS and Wireless connection. I am using Windows Live mail and and set it up so it is manually synchronized! Same with other mail accounts.
But, every time I connect to the internet using wireless and then press Send/Recieve, it keeps opening GPRS and use it to retrieve new e-mails and ignores my wireless connection!!! Which is really annoying.
How do I fix that?
I have exactly the same... but then with internet sharing with my laptop... keeps using my gprs/3g instead off the wifi that is 100 times faster.
annoying
and it is really annoying as you said, it is much faster with wifi and for people like me where I do not have monthly GPRS data included, it's really annoying and costs a lot.
Earlier, I had my e-mail to automatically download new emails daily and suddenly, I got a huge phone bill because of that problem!! So, e-mails are downloaded manually now until I fix the problem!!
You can find the answer here:
http://forum.xda-developers.com/showpost.php?p=2615010&postcount=10
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
yes but
Yes but chaning preferences for my network would result in not having my mms working, or gprs when I need it?
However, I have to go back to settings and change everything again to get things to work!!!! I would rather have a solution than a workaround
not working
programatix said:
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
Click to expand...
Click to collapse
I tried your solution but the phone tries to connect using MMS connection and of course windows live mail fails to download emails even though my wifi is on and connected!! It just ignores the wifi??
nodata by Paul @ MoDaCo
nodata
iRiKi said:
nodata by Paul @ MoDaCo
Click to expand...
Click to collapse
Have you tried NoDATA with HTC Diamond with WM6.1?? NoData seems to be an old cab file for older versions of WM?

RQ: How to stop GPRS / How to activate ActiveSync again ?

Hello.I'm looking for a program which have to stop totally GPRS using.There are many programs which use GPRS by default and GPRS costs me a fortune.Is there a program which turns off GPRS entirely ?
Thank you
Sorry for my english,Im still studying it.
I've found a program,but I can't try it.After I removed WMWiFiRouter everytime when I connect the phone to the PC it recognizes it as Windows Mobile based Internet Sharing Device and ActiveSync can't connect to the phone.And the phone no more shows me the menu to choose if I want to connect to the PC through ActiveSync or (I forgot the other) and it appears Internet Sharing program.Help.
Can tell me how to restore my previous type of connection? Thank you in advance.
There is a program called nodata that will allow you to select and disable your GPRS connection. I haven't used it, but it seems to be pretty popular.
Thank you,but I have this program already,as I have written.I'm looking for a solution of the other problem that I've described previously in the topic.
Edit: I don't know exactly what I've done but I fixed it.
I've the same problem (getting no active sync anymore but internet sharing device) so maybe anybody knows how to solve it?
why don't you guys try kaiser tweak, i believe it's got some options for disabling and enabling gprs and activesync. http://www.jongma.org/KaiserTweak/
I've solved it. on my phone at least: i activated the internet sharing via bluetooth, connected, dosconencted. set it to usb and connected and disconnected again and after that active sync worked again....
but thanks for the tool, i'll try that out, too. (maybe there are some other interesting things, too ;-) )
Connecting and disconnecting worked for me too

Categories

Resources