So i have had a diamond for a few months now and it has been awsome, used a couple different roms, mighty being my fav and works the best in my opinion, but just this weekend the screen input do not work. the hard buttons work, and its not physical damage either. i have yet to get it to my comp to try and reflash but has anyone else seen/experienced this?
dont want a $500 paperweight
Could be hardware failure cased by a loose connector. I seem to remember that happening to another poster fairly recently.
i had the same problem, so i sent mine back to orange n got a new one
crap so now i gotta relock it and throw telus stock rom back on and all that garbage, ****!
Eh, i just did a hard-reset and that fixed it. Of course it was annoying losing stuff that i didnt had backed up and having to reinstall all the software and so on, BUT i was so happy it wasnt broken.
how can i do a hard reset without the screen/clearstorage function?
the hardbutton hard resets have never worked for me
Related
Hi all... just curious if anyone has had this problem or has any advice for me:
Today out of nowhere my TyTN II starts acting really funky. When I push the "power" button on the right hand side, it lights up the phone, pulls up the phone application and some letters begin appearing one-at-a-time where the currently dialing number usually shows up (E, D, F, and then C if it makes any difference). It will also light up and do this intermittently when the phone is not being used. The notes recorder app also came up and began recording until I unmapped that application from the 6th button in the settings. In addition, all of the slide out keyboard buttons and the soft-keys themselves (save for the middle button) are completely non-responsive. Using the stylus on-screen works fine. So far a soft reset and a hard reset (always wonderful away from home) hasn't alleviated the issue.
I've contacted HTC support, and they gave me the warranty repair number (of course this crap always happens on a weekend). It sure sounds like a hardware failure to me, but I just thought I'd throw it out to the geeks on here...
I'll buy it for 100 dollars. email me: [email protected]
or you could try doing a master reset on the phone or flashing it with a rom..
hopefully you have hard spl on your phone
huh? huh? and huh?
Oh and if anyone out there who isn't inclined to be a jerk, could you give me some insight into what to expect from HTC service and repair? Do you agree that this is a hardware issue and most likely not a corrupted ROM?
Its not master reset its hard reset. What he is saying is to reset everything and it should work. Look at the Wiki for help. We aren't gonna spoon feed you answers that are searchable, but if they aren't specifically answered in some source then we will help which is 50% of the time.
~~Tito~~
did any of you guys even read his post?
castlecraver said:
So far a soft reset and a hard reset (always wonderful away from home) hasn't alleviated the issue.
Click to expand...
Click to collapse
XtreMe_G said:
did any of you guys even read his post?
Click to expand...
Click to collapse
I said to do it again then read the wiki if it doesn't work. 2nd time should be the charm.
If not use a different rom .
This happened to my up button I forgot to mention, it was the radio for me that was the problem so try a different radio also.
Did you find the answer?
Hello Mate,
I've got the very same issue, thought it may have been a virus at first, but after loading up a new rom the problem still exists, I'm reckoning the phone is less than useless now
i had this type of problem for quite some amount of time & that too randomly. then i found that a key lock feature in pocketmusic was interfering and causing it. similarly, i feel any other apps that may use/ be used to remap keys may cause this issue.
ofc, since u have done a hard reset, this may not really apply to u. but then which rom & radio are u using anyways?
Hey... just an update. I sent the device back to HTC in Houston with an RMA. Communication with the repair center was fairly poor. I had no idea the phone was on it's way back to me until it showed up at my door today. No information in the box, but I wasn't charged for any repair and everything works as normal at this time. The device went through the "first time" setup when powered on. Still no idea what caused the problem or what exactly they did. R:...12.32, D:1.56.0 (same as before I'm pretty sure).
axeman: Never had pocketmusic on this (AFAIK), but if it was due to some other software re-mapping the keys, wouldn't it sort itself out with a hard reset? I could be wrong. This seems more like a hardware failure to me.
devil's advocate: Try contacting the HTC repair center in your country. They gave me an RMA without any trouble and their turnaround was quick (although I would have appreciated some notification that it was fixed and back on it's way). I got my TyTN II within a few weeks of it coming out, so I'd assume yours is under warranty still as well. I wouldn't chalk it up as worthless quite yet, even (dare I say) still worth more than $100. (Suck my balls, gqstatus0685 )
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
I got this weird problem... On two Xperias! My first was like this from the beginning, the other started two days ago.
I can't get the screen aligned. i got coordinates from a friends perfectly aligned screen, and it is off, not in the edges, but in the middle. I don't understand what might be wrong. I have aligned my screen 30 times, and flashed the phone two, with two different ROMs, one original UK Xperia, one Blackstone by itje.
If other people got this problem, please make a post here.
Also, if you got "perfect align screen", if you can post your coordinates from the registry here, so I can test them, it would be great!
bump. please, need to find out if other people got this problem
Lol
Looks like nobody does. Do a hard reset on your phone from the Start Menu/Settings and perform the manual align by tapping the screen.
You can't just take settings from another phone and expect them to align because it doesn't work like that, otherwise the alignment wouldnt even be necessary.
Manual align this way and let us know how it goes.
Well, it did work at first. But the day after the middle part of the screen was completely off. But I have tried hard reset, soft reset, installed different ROMs, nothing works.
Sounds weird. Of the digitizer is broken it wouldn't work anywhere correctly. Check your installed programs. Maybe something is messing with your touch-alignment.
Have same issue
do you align using ur finger or ur stylus ??....better the stylus
"i got coordinates from a friends perfectly aligned"
Now that sentence made me think about what you are doing..
just align and follow the instructions? ...
Sorry but... JERK!
I tried to align, but it just looped, as I SAID BEFORE! Please read all posts before saying ANYTHING, because if not, it WON'T help me, or others that might have the same problem.
The coordinates from my friend, which I got from his registry, on the same phone, with same language, probably the same party, worked one day, the next it didn't. I allways align with my stylus, tried with finger, didn't help. got no programs installed, have tried itje's rom, and a vanilla Xperia UK rom, same problem.
In fact, same problem on TWO Xperias, gotten from the same store, same color, but the last from a later party, which my friend got one of too.
This can't be a coincidence... I will deliver my phone to the store, but I need confirmation about the loop from other people here too, because this time, I will get my money back. I can't go half a year without a phone because SE screwed up their deal with HTC, which choose to take cheap crap-plastics and apparently screens instead of the real deal in phones priced 650$++ here in Norway. It just doesn't hold up!
alignment routine looping
i've had the alignment program problem looping issue before and eventually realised that it was because I wasn't tapping the screen hard enough with my stylus. I'm not saying smash the hell out of it but applying a little extra pressure did the trick for me.
As far as loosing the settings and hacking it using a mate's calibration I'm with the others - probably an app you've got installed that's wiping it and using somebody else's cal is pointless!
I tried tapping so hard you get the lcd-effect, the rainbow-effect on the screen. Too hard. And, only prog i got installed is regedit. Only aftermarket I got, so thats no go. Guess the touch-thingy (digitizer?) is screwed then. Well, I want my money back
It will be just a few days till may warranty will be over (1 year warranty) and my silver just got almost dead digitizer today. Sometimes it works sometimes it doesn't since I installed touch response before so it'll vibrate when I touch it. I hard reset my phone since I think it maybe due to a software problem, but now I'm stuck on the align screen. I guess of all the Xperia users on the whole wide world I consider myself to be the "unluckiest".
My g1 has not been working properly since i flashed JACHero2.1 something. They keys dont function properly like when I press end it either puts me at the lock screen or types 5u3i, there are several other keys that are broken too. I have tried new rom, radio and spl flashes and nothing fixes it. Any ideas what I could try next or what could have caused this?
have you tried a wipe?
restore from nandroid?
Hope you are under warranty
Call T-Mobile and just flat out be honest with them, minus the part about you flashing firmwares.. you will have a refurb that you really cant tell the difference from a new one on your way and at your doorstep for just the shipping and handling charge of $9.95 added onto your T-Mobile monthly bill.
I have done a wipe, not a nandroid yet I will look into that. Its sadly not under warranty I got it on craigs list.
I fixed it, thank you guys for the suggestions, the problem was in fact hardware related, I took the phone apart, which i must admit was the hardest phone to completely disassemble i have ever seen, and sprayed it down with electrical parts cleaner let it dry out and it now it works great.
I was flashing a rom the other day (that i had flashed in the past and worked fine) and then i noticed that the touchscreen did not work. (everything else worked)
i flashed back to the cyanogen rom and my touchscreen still did not work.
(when i say my touchscreen doesnt work i mean that i cant touch anything, not even the android to set up my phone)
the trackball works but i am FORCED to touch the android and i cant
ive been flashing and still no luck, any ideas on what happened to my touchscreen or any ideas on how to fix it?
please help!!
I've seen a few of the threads. More than likely your touch screen has died (hardware issue - not software) and I'm not sure if that's replaceable.
Ask a technision :/ like the guy above said its proble the tS died may need replacement or ribbon isnt connected rite .
So whats my best bet in going about this?
i dont know what to do :/
if you feel like your able to take apart the phone and replace the screen, you could always try it. either that or buy a new phone or possibly a cell phone repair shop if you even have one.
i decided to kinda drop it.
it works now...
thanks for your help anyways guys!
D:
I wouldn't be DROPPING it to fix it...
Problem is probably a badly seated ribbon cable, which means it is STILL not well seated and will probably happen again.
Look in the screen hinge as you're sliding the screen open -- see the little ribbons in there? Probably got yanked a little.