how to use wifi Himalaya Mobile 6 - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

i am using c_shekhar s rom 6.1.2a16cs and in wlan manager shows wireless Lan OFF . Turn on WLan i am now in australia and before was in india please help me how to use here wifi here and it wont turn on when i click on Turn on Wlan thanks i want use as i am using on laptop but i dont know how to use it free

Click the Turn Wifi On, goto Setings, Wifi..then just tap&Hold on the Access Point and click Connect..i have this problem sometimes too..thats a workout for it
its caused bys ome unsusal app which i havent figured out, YET
oh btw, Congratz on going to Austrailia..

help123 said:
i am using c_shekhar s rom 6.1.2a16cs and in wlan manager shows wireless Lan OFF . Turn on WLan i am now in australia and before was in india please help me how to use here wifi here and it wont turn on when i click on Turn on Wlan thanks i want use as i am using on laptop but i dont know how to use it free
Click to expand...
Click to collapse
Unfortionatly this ROM is very good but missing some files for wifi.
See this link post #8
http://forum.xda-developers.com/showthread.php?t=394096
I hv to use the ROM @ this link to be able 2 use wifi

vista issue
but why i cant install any rom with vista ? everything is ok but after start bootloader it says error

heh, have u read the Sticky's ?
read this " Noobs Definitive Guide to Himalaya Upgrading "

Related

Help me Please

Now I test Helmi_WM2k5_AKU3.2_32mb_v1.3.2_16mb_bitpool_32mbRamdisk. But I have Proplem is I Can't Connect Wireless Modem And Show The Screen is
"COM OPEN ERROR (8)"
Just very basic question: what do you need this for? Cannot you just use Internet Sharing? You will find it in all never roms (like Baniaczek and Xplode)
Modem
jakubd said:
Just very basic question: what do you need this for? Cannot you just use Internet Sharing? You will find it in all never roms (like Baniaczek and Xplode)
Click to expand...
Click to collapse
I want to make My IIs is Modem, But I want to use Computer is Browser .

Problems with ActiveSync and wm 6

Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!

O2 XDAIII Problem WM Cube Updating

http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me
lestera_rpg said:
http://forum.xda-developers.com/showthread.php?t=371182&page=4
I Downloaded This rom an Than Connectied My PPC To my PC than opened "start_uspl" than it has opened new window I agreed everything and it startied updating There was jus 0% when atcivesync icond make white color and hide and than this rom write me so..
"Error 260 : Connection
The Update Utillity Can not Connect To your PDA Phone. Please chack that your usb cabel/cradle is connected properly between the PC and your PDA phone
Check the following
1.The PDA phone is connected to the usb cable/cradle
2.The USB cardle/cable is connected to the PC
"
I tried it many times but it make me same error Also Tryed Hard and soft reset
Please Someone Help me
I`m Sorry For My bad English
Please Please Please Get Few Time For me
Click to expand...
Click to collapse
sounds like your running vista, search for it here, there is athread that will help you.
neilhhardy said:
sounds like your running vista, search for it here, there is athread that will help you.
Click to expand...
Click to collapse
No I Have XP With SP2 by the way my FireWall is turn off
i think it´s an Artemis mobile 6 rom.
you can´t take a rom from an other device.
you have to take a rom for blue angel
(you can find correct roms here:
http://forum.xda-developers.com/forumdisplay.php?f=386)
hope that help
(p.s. don´t forget to update radio first !!!)
Wmvfan is correct, the ROM you linked to is not for a blue angel. You are lucky you were not able to flash that ROM to your phone, you would have had a paper weight if you did.
Read the wiki for information on flashing.
Yes it is right it was another PPC Rom But now I`m not incorrect http://forum.xda-developers.com/showthread.php?t=382909 it is really for my Blue Angel but i have same problem
(p.s. don´t forget to update radio first !!!)
Click to expand...
Click to collapse
that should solve the problem.
Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That
lestera_rpg said:
Maybe But I dont know how to do that can you give me some tutorial link??? Where I found this Rom There Was not Discripted How To install That
Click to expand...
Click to collapse
From the XDA Blue Angel wiki, How to upgrade to the latest Radio ROM version (currently 1.15.00):
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade

Can't connect to my pc!

I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.
hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.
Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.
I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.
have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone

Wifi WPA problem

Hi all, i've read all the forums and tried all the possible solutions, and my wifi (HTC Alpine O2 IIi) is stil not working..
When i turn off the router encryption, it connects, but when i use WPA or WEP encryption, it just wont connect no matter how i try. I tried to install all the possible softwares to help wifi connection but everytime i install, it says it's not a valid CE application.
I've changed the power mode to best performance, tried manually setting the ip. But stil nothing works...help......... pls...... i've been working on it for 3 weeks already... :S
ronan_chai said:
Hi all, i've read all the forums and tried all the possible solutions, and my wifi (HTC Alpine O2 IIi) is stil not working..
When i turn off the router encryption, it connects, but when i use WPA or WEP encryption, it just wont connect no matter how i try. I tried to install all the possible softwares to help wifi connection but everytime i install, it says it's not a valid CE application.
I've changed the power mode to best performance, tried manually setting the ip. But stil nothing works...help......... pls...... i've been working on it for 3 weeks already... :S
Click to expand...
Click to collapse
I do not know whether this application can work on your device! but if you want to try it, please just
i just want to reconfirm... .cab file means I'l just have to copy it into my htc and then run from within the phone right? if yes then, no luck
Well, additional information, when i disable all the security, it connects with an ip 192.168.0.x but when i enable WPA, it just wont connect, sometimes i get ip 169.x.x.x with no SSID and BSSID, and when i check the network adapter tiacxwln Compatible Wireless Ethernet, the ip address assigned is always fe80::209:2dff:fe1. Does that gives any clue??
ronan_chai said:
i just want to reconfirm... .cab file means I'l just have to copy it into my htc and then run from within the phone right? if yes then, no luck
Click to expand...
Click to collapse
Here.... try to use the ACT v3.3
not valid windows CE application also
but i managed to install Wifi companion....however i still cannot get it to go online....it says the page cannot be found when i surf the net.
another weird thing is...i'm sure that my router is using WPA/WPA2 encryption, but the wifi-companion detects it as WEP encrypted...could this be the prob?? but how to solve it???
ronan_chai said:
not valid windows CE application also
but i managed to install Wifi companion....however i still cannot get it to go online....it says the page cannot be found when i surf the net.
another weird thing is...i'm sure that my router is using WPA/WPA2 encryption, but the wifi-companion detects it as WEP encrypted...could this be the prob?? but how to solve it???
Click to expand...
Click to collapse
What's on your device already installed NET CF 3.5 ...?
Because Advanced Configuration Tool
v3.30 need Requirements NET COMPACT FRAMEWORK 3.5
I'm using windows mobile 2003 SE. How to check if i've already installed NET COMPACT FRAMEWORK 3.5 or not?? And how install it if I don't have one?? Thanks
omg...i've just only download n installed NET COMPACT FRAMEWORK 3.5...but stil it says it's not a valid CE application.....any idea???
ronan_chai said:
omg...i've just only download n installed NET COMPACT FRAMEWORK 3.5...but stil it says it's not a valid CE application.....any idea???
Click to expand...
Click to collapse
course you get notification it's not a valid CE device application because you are still using windows mobile 2003 SE, but not why it was !!!
you install a new first SDKCerts after that you can install NET CF 3.7
even SdkCert.cab is also not a valid Windows CE setup file.... omg...
lol....Smartphone2003Testcert.cab is not a valid Windows CE Setup als.....
i can??? i can upgrade xda alpine to WM6???? I though it is not possible???
Please do not spam or flame the members on this site. I will issue infractions for continuation of this. Thank you,
WDM

Categories

Resources