Hi all, i've read all the forums and tried all the possible solutions, and my wifi (HTC Alpine O2 IIi) is stil not working..
When i turn off the router encryption, it connects, but when i use WPA or WEP encryption, it just wont connect no matter how i try. I tried to install all the possible softwares to help wifi connection but everytime i install, it says it's not a valid CE application.
I've changed the power mode to best performance, tried manually setting the ip. But stil nothing works...help......... pls...... i've been working on it for 3 weeks already... :S
ronan_chai said:
Hi all, i've read all the forums and tried all the possible solutions, and my wifi (HTC Alpine O2 IIi) is stil not working..
When i turn off the router encryption, it connects, but when i use WPA or WEP encryption, it just wont connect no matter how i try. I tried to install all the possible softwares to help wifi connection but everytime i install, it says it's not a valid CE application.
I've changed the power mode to best performance, tried manually setting the ip. But stil nothing works...help......... pls...... i've been working on it for 3 weeks already... :S
Click to expand...
Click to collapse
I do not know whether this application can work on your device! but if you want to try it, please just
i just want to reconfirm... .cab file means I'l just have to copy it into my htc and then run from within the phone right? if yes then, no luck
Well, additional information, when i disable all the security, it connects with an ip 192.168.0.x but when i enable WPA, it just wont connect, sometimes i get ip 169.x.x.x with no SSID and BSSID, and when i check the network adapter tiacxwln Compatible Wireless Ethernet, the ip address assigned is always fe80::209:2dff:fe1. Does that gives any clue??
ronan_chai said:
i just want to reconfirm... .cab file means I'l just have to copy it into my htc and then run from within the phone right? if yes then, no luck
Click to expand...
Click to collapse
Here.... try to use the ACT v3.3
not valid windows CE application also
but i managed to install Wifi companion....however i still cannot get it to go online....it says the page cannot be found when i surf the net.
another weird thing is...i'm sure that my router is using WPA/WPA2 encryption, but the wifi-companion detects it as WEP encrypted...could this be the prob?? but how to solve it???
ronan_chai said:
not valid windows CE application also
but i managed to install Wifi companion....however i still cannot get it to go online....it says the page cannot be found when i surf the net.
another weird thing is...i'm sure that my router is using WPA/WPA2 encryption, but the wifi-companion detects it as WEP encrypted...could this be the prob?? but how to solve it???
Click to expand...
Click to collapse
What's on your device already installed NET CF 3.5 ...?
Because Advanced Configuration Tool
v3.30 need Requirements NET COMPACT FRAMEWORK 3.5
I'm using windows mobile 2003 SE. How to check if i've already installed NET COMPACT FRAMEWORK 3.5 or not?? And how install it if I don't have one?? Thanks
omg...i've just only download n installed NET COMPACT FRAMEWORK 3.5...but stil it says it's not a valid CE application.....any idea???
ronan_chai said:
omg...i've just only download n installed NET COMPACT FRAMEWORK 3.5...but stil it says it's not a valid CE application.....any idea???
Click to expand...
Click to collapse
course you get notification it's not a valid CE device application because you are still using windows mobile 2003 SE, but not why it was !!!
you install a new first SDKCerts after that you can install NET CF 3.7
even SdkCert.cab is also not a valid Windows CE setup file.... omg...
lol....Smartphone2003Testcert.cab is not a valid Windows CE Setup als.....
i can??? i can upgrade xda alpine to WM6???? I though it is not possible???
Please do not spam or flame the members on this site. I will issue infractions for continuation of this. Thank you,
WDM
Related
Hi2all. I flashed my BA from 1.22.00WWE to BA_TMUK_14200_112_11300_Ship. After that I had problems with GPRS connection. I can connect maximum three times and after that a get message
Dialed: Internet
Cannot connect for an unknown reason. To check your connecstion settings and change them if needed, tap Settings.... bla bla bla..........
I have same settings as on 1.22.00WWE. I tried flash radio to 1.15.00 and 1.13.10 and both had same problem. I can do only SR or use RestartRadio.exe. After that I can connect to internet maximum three times again.
Plllllllllls, help meeeeeeeeeee... any idea???
search trough this forum, there is already a solution for this problem.
You must renamed some files and installed IA_CallerID_1.20_WWE.CAB
igoen said:
search trough this forum, there is already a solution for this problem.
You must renamed some files and installed IA_CallerID_1.20_WWE.CAB
Click to expand...
Click to collapse
Oups... I think, I have it. Thanks
It's here
http://forum.xda-developers.com/viewtopic.php?t=33085&highlight=iacallerid1+20wwe+cab
Hi,
Been reading the posts and I can't seem to find anything relating to this exactly.
I had finally got outlook to sync with my work server when my admin man gave me a certificate to install on my TyTnII.
It worked a treat and then I decided to flash to HTC shipped ROM (I was on Orange - now unlocked too). It worked OK then too.
So I was brave and decided to give Dutty's ROM a go (Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_). Didn't work after that. Re-installed the HTC ship ROM and it still doesn't work (installed the certificate on PPC OK).
I have un-installed ActiveSynce and deleted the partnership but still no joy.
Has something been written in the registry ??
Thanks
I have duttys non-cube version 19700 version cooked and am having no problems syncing.
I just install my chain/root certificate first, fill out the server name, user name and password. Its worked on every cooked rom i tried (and Ive tried alot).
One little detail though that tricked me up for a bit was that you cannot be hooked up with your usb cable to your pc when you try to sync over the air. When the USB to PC cable is plugged in the phone tries to use the pc to sync with which wont work if its from home.
Find the same issue with using wireless.
Also know that if the company created a self-signed certificate you have to load the root/chain certificate first, but if its a recognized 3rd party certificate (like verisign or digicert) you don't.
Dont expect the autodetect server function to work during the setup unless you have a internet host name set up as autodiscover.domain.com and have a certificate with that name as one of its alternate names. Otherwise just set it up manually.
.
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
gstechno said:
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
Click to expand...
Click to collapse
Do you have acces do the exchange server, you can have luck in the eventlog for a more detaileds
and which Exchange version is it ? 2003/2003sp2/2007sp1?
I can say for sure, its not your activesync, on EX2007 security policies can have a problem be forced on the device. 2003 can have an other problem. I will look for you if i get home.
I have fixed it. But I would like to know why Duttys won't work.
I now have
ROM 3.03.405.0 WWE (date 01/08/08 US)
Radio 1.64.06.04
Protocol Version 25.70.40.02H
Syncs up a treat, but I would like to put Duttys back on. Any ideas or suggestions?
The admin guy said nothing had changed on the server and there were no logs
Sorry man, i totally forgot about you
But I tried a lot of roms, but i had never problems with my syncing same as Tayton. But how did you fix it? Just flash to an orginal Rom?
Sorry about the logs i was not clear enough. The admin can see if somebody is connecting with his device, and then you have some more details for exploring the problem. Most of the time errors from the PDA are to general.
Btw here is a link for more details about the error:
http://www.shijaz.com/exchange/activesync_errors.htm
Hi I had to reinstall my Vista HP...but after that I cant connect to internet throught WMDC (latest) I also HR my Diamond never had these problems pls help me something...
PS: firewall is off and else WMDC works normal even synchronization...
PS2: tried latest duttys, bepes and swiftBlades ROMs
thx for help...
it was because of advance network functionality I had to uncheck it...
edit: connection without advanced network functionality is very unstable so Im at the beginning anybody know whats wrong???
Same problem by me.
Any solutions??
i am using c_shekhar s rom 6.1.2a16cs and in wlan manager shows wireless Lan OFF . Turn on WLan i am now in australia and before was in india please help me how to use here wifi here and it wont turn on when i click on Turn on Wlan thanks i want use as i am using on laptop but i dont know how to use it free
Click the Turn Wifi On, goto Setings, Wifi..then just tap&Hold on the Access Point and click Connect..i have this problem sometimes too..thats a workout for it
its caused bys ome unsusal app which i havent figured out, YET
oh btw, Congratz on going to Austrailia..
help123 said:
i am using c_shekhar s rom 6.1.2a16cs and in wlan manager shows wireless Lan OFF . Turn on WLan i am now in australia and before was in india please help me how to use here wifi here and it wont turn on when i click on Turn on Wlan thanks i want use as i am using on laptop but i dont know how to use it free
Click to expand...
Click to collapse
Unfortionatly this ROM is very good but missing some files for wifi.
See this link post #8
http://forum.xda-developers.com/showthread.php?t=394096
I hv to use the ROM @ this link to be able 2 use wifi
vista issue
but why i cant install any rom with vista ? everything is ok but after start bootloader it says error
heh, have u read the Sticky's ?
read this " Noobs Definitive Guide to Himalaya Upgrading "
Hi,
I'm trying to flash my Blue angel with a new rom, and have done with success...I've tried sundreams winmobile 6.5 and d2's latest windows mobile 6.5. These look brilliant, but neither will allow me to go online...D2's says that I'm connected, but nothing happens when I try to log onto a web page, and sun dreams doesn't seem to be able to connect to my wireless router, but simply finds it..
I have tried downgrading to o2uk win2003se rom, but no rom information comes up on the second screen when I try to flash it to my device.
Any ideas?
Regards,
Nick
studentpaps said:
Hi,
I'm trying to flash my Blue angel with a new rom, and have done with success...I've tried sundreams winmobile 6.5 and d2's latest windows mobile 6.5. These look brilliant, but neither will allow me to go online...D2's says that I'm connected, but nothing happens when I try to log onto a web page, and sun dreams doesn't seem to be able to connect to my wireless router, but simply finds it..
I have tried downgrading to o2uk win2003se rom, but no rom information comes up on the second screen when I try to flash it to my device.
Any ideas?
Regards,
Nick
Click to expand...
Click to collapse
What kind of encryption are you using?
Sorry for the late reply..
TKIP
Have you tried installing sun_dream's wifi fix?
Is there a chance you can leave me the link for the wifi patch/fix? I can't seem to find it anywhere...