Database Develop

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !

Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.

It doesn`t work too, it always stops at 95% has anyone another idea?

did you try hard reset?

Yes i tried hard reset, but it is always in bootloader!

I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!

nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079

Sorry but i do not speak hungarian. What do you want to tell me ?

I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???

oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???

Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!

that link is broken

Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!

Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Musna do you have any massage such as msn

Diamond Help!!!

Ok, I'm a complete newbie at phone modding... I have read numerous websites and tutorials and posts on how to upgrade my Touch Diamond to Windows 6.5 but i fail. I fail miserably.
My Touch Diamond is an Orange UK Handset with Windows 6.1, about a month ago i upgraded my phone with an official Orange HTC ROM, so I'm currently at version 1.93.405.1 WWE...
Ok so my problem...
I used Olinex HardSPL version 1.38 and I can access the bootloader screen. Easy.
I then try install the Radio, Currently installed is 1.00.25.05 as standard, so I try install the same one again... The connection to my device is active and the screen goes black as the RUU does its thing, then.... nothing! the percentage bar on my PC stays at 0% and my phone is black.
So i think damn it ill try installing the ROM anyways as I already have the Radio version i want, and when the RUU starts the percentage thingy again... its stopped again at 0% and my phone now also says 0% and i check device centre for the connection and its not there... NO CONNECTION! so...
please... tell me where Im going wrong, do i need to CID the phone?
any help would be appreciated, Thanks in advance.

Trinity not iniciating, plz help

i installed 3 new roms on my HTC (wm6.1, wm6.5(english), and wm6.5 portuguese).
Everything was doing fine, until i was uodating to wm6.5 (portuguese) and is stopped updating at 1% of instalation, i restarted my HTC, and connected to pc and run the RUU again, this time it went till 3% and then the phone just restart and i get stuck on the HTC screen. i can't inicate the Operating System, and when i try now to run de RUU from the tricolor screen, it just stops at 1 %. HELP
WHAT DO I DO ?????????????????????
I'm really desperate, i don't think it has a solution, but plz help me, i don't want to lose my trinity this way
by the way i took off the SIM and the memory card.

Mine fell over in the middle of upgrading, and looked like it was screwed.
With nothing to lose, I decided to to a hard reset.
you know the one - 2 buttons above red & green at
the same time as the reset button.
That did actually work, worth a try perhaps?
good luck with the new paperweight

mike_55 said:
i installed 3 new roms on my HTC (wm6.1, wm6.5(english), and wm6.5 portuguese).
Everything was doing fine, until i was uodating to wm6.5 (portuguese) and is stopped updating at 1% of instalation, i restarted my HTC, and connected to pc and run the RUU again, this time it went till 3% and then the phone just restart and i get stuck on the HTC screen. i can't inicate the Operating System, and when i try now to run de RUU from the tricolor screen, it just stops at 1 %. HELP
WHAT DO I DO ?????????????????????
I'm really desperate, i don't think it has a solution, but plz help me, i don't want to lose my trinity this way
by the way i took off the SIM and the memory card.
Click to expand...
Click to collapse
flush to original rom than update agine..it worked 4 me

Diamond keep restarting when turn on, pls help

My HTC Diamond have some trouble: Every time I turn it on, it boot to splash screen and then restart, then go on splash screen and restart again, again, and again.It dont boot to Windows.
I am using 2.03 WWE ROM anh tried to reflash so many rom, both Rom ship and cooked rom but still no hope.
I tried to downgrade its SPL from 1.40 Olinex to original SPL as following thread: http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
But not work, in tri colors screen is still 1.40 Olinex
So anyone pls help, I love my Diamond so muc, dont let it dying like this. PLS...
I do MTTY everytime i flash new ROM

well, has happened to me before, I just take out the battery and leave it out for couple minutes and then should be ok, try starting it when is on the charger, also hard-reset is always an option. I think that is softwware based problem.
cheers

My diamond also started doing this yesterday night, it was working fine until now. I have flashed it with Donsalaris rom which came out Xmas last year and its been working fine for over 6 months now.
Then yesterday night after a long chat it started to do this ??..
I tried taking out the battery still no good. I hard reset it and now works fine for sometime like a few hours to a few minutes and go into this restarting cycle again.
I'v left it on the table and out of the blue it will reset it selfs and start the cycle ?
Seems like a software problem but a hard reset should have solved it right ? But it only partially solved it
Anybody gott a clue as to what it might be ???

[Q] Stylus doesn't work etc.

Hello all, I have Xperia X1 with firmware R3AA007 (about 5 months) and on friday 29.04.2011 this phone was restart unreasonably. After this I saw greel logo Windows mobile 6.1 only and that's all. So I taken off batterie and get back to phone after cca 10 minutes. Switched on phone and the same was happened. Green logo WM 6.1 and it's all. I loaded again this firmware and phone now working. But problem is that doesn't work stylus and nail (before problem everything worked). Now I can control only with my fingerprint but this is little bigger and everytime I'm touching on other place on screen. Could U help me please? Where would be problem? Thanx a lot for answers and help!!!!!

Did you try calibrating the screen again?

I tried everything. Can be mistake with ROM? What I'ld flash some other ROM?

I would try to redownload and flash the stock rom to exclude a problem caused by your copy of the rom.