hi guys
need a bit of advice i have the rom version 3.34.721.2 one of the original HTC roms. i cant seem to find an option to enable 3G on my phone. i have tried going through my phone menu ...option...network but i dont seem to have the option to change from gsm to utms or dual mode so that i can use 3g or hspda on my phone .. any advice ?
regards Asim
Have you tried Kaiser Tweak application? Using that on my phone to play with the bands.
Related
Hi,
I have my D810 upgraded to the new HK D810 GPS Enabled Rom
(Rom 1.23.708.4, Radio 1.38.00.11)
and since then my 3G is not working quite right, I can get full bar of 3G, but I just couldn't make a call or recieve any call. And I'm on the Cingular network in the US.
Before I upgrade the rom, I can access the 3G with no problem. Now I can make a call only if I force my D810 to stay on the GSM network (2G).
Can somebody help? Or should I downgrade my rom back to the original dopod D810 rom? If yes, where can I find it?
Thanks.
Try using HTC tweaker to turn off HSDPA, that did the trick for me
Does it mean I can never use HSDPA on my D810 ?
ok, I've disable HSDPA, but it still can't make any call on 3G.....
man... now I hate the new rom... I rather don't have GPS but have my phone working...
have you have checked Start-->Settings-->Phone-->Band Tab--> and ensure that the Network Type is "Auto" or "WCDMA" and NOT GSM? and also ensure that the GSM/UMTS band is set correctly? (now, I'm really nervous about using that ROM!!!)
i have all the Band and Network setting right...
some people from the other forum say it is the network issue from Cingular because they are having the same issue, but on other phones.
it is quite weird, i can make a call under 3G in certain area within Chicago, but anywhere near my work office, it won't work...
And as usual, the cingular cs are useless, they don't even know what is going on
When I set my Diamond to Auto configuration it always chooses GSM with GPRS data, I believe its because the signal is stronger than 3G.. If I set the phone to 3G it works fine (almost always shows full signal strenght). But at my work I have no 3G signal, and I need to manually set the phone to "auto" och GSM again, and it wont change back to 3G when there is 3G in range again (even if I choose Auto).
So, my question is, is there any app or solution to ALWAYS be connected to 3G when there is enough signal, if not, it will choose GSM until it finds the 3G signal again?
Im getting quite irritated when I need to change the band manually several times a day...
Thanks..
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
mil_house said:
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
Click to expand...
Click to collapse
Advanced Config has an option to add a '3G' button to CommManager which does exactly what you want.
What I would really like however, is a 3G button that toggles between '3G' and 'GSM', rather than 'Auto' and 'GSM'
Anyone ?
Is this possible? And if so can someone send me a cab file or instructions on how to make this happen. And sorry if this has been addressed already. This is my 1st official post. I have an AT&T Tilt with STOCK HTC AT&T ROM. Just upgraded the HTC Camera with one of the cab files I found on this site. Also I am having a bit of difficulty uninstalling two applications.
Wizard_reTouched_dial2.cab and today_wallpaper_pack.exe
I went to the normal start/settings/system/remove programs and I see them both in the list but i am unable to uninstall them. HELP!!!!!!
As long as you have a 3G / HSDPA / UMTS signal, you will be able to talk and use internet at the same time. If you are only on edge or gprs, you can NOT. This is covered many places in this forum........ Searching is your friend.....
Hey i'm using an AT&T TILT on Tmobile's Network with Stock Rom from HTC "AT&T's"
How can I force my phone or get my phone to use something other than Edge?
babyface215 said:
How can I force my phone or get my phone to use something other than Edge?
Click to expand...
Click to collapse
Travel to a location where there's clear 3G reception. Unless you've configured your phone away from default settings, it'll automatically default to the most useful signal it can get.
If you're using the stock ATT ROM then use bandswitch. If you're using custom ROM then it's in the phone settings. I use Garmin DK3 Final and it's in the phone settings. I can set it to connect only to UMTS band and only to HSDPA. I cant stand the 2G buzz when ever I'm around any speakers.
Are you referring to the Radio Version
or the actual ROMPaq? I am using AT&T/HTC Stock Rom but I am using the Radio Version from Japan.. 1.71.09.01
babyface215 said:
I am using AT&T/HTC Stock Rom but I am using the Radio Version from Japan.. 1.71.09.01
Click to expand...
Click to collapse
From what I know of, Japan uses a different frequency band than the rest of the world for 3G (800MHz). So you might not be able to connect to 3G networks in the US with that radio version. Do you ever see a "3G" or "H" icon for the network status?
No only E of course for EDGE
Cot Darnarbit!!! I might as well go back to the STOCK Radio Version I was running.
im currently on valkyrie rom, and i wonder if there is a setting that allows me to only use the gsm net, not 3G for my xperia X1i, im experiencing poor signal strength at work.. please say there is and that it will work for me
Well, i've disabled 3G in Settings---> Phone
Then i also disabled 3G Data with "NoData" from MoDaCo http://htcdriver.com/index.php?page=nodata
Don't know anything about the valkyrie ROM, but i suppose you could do what i did.
In valkyrie you should have the option to change to GSM mode in CommManager.
i tried both metods, but i dont get any reception when i change the damn thing! probably my operator, im gonna call them
Hi, sorry for the seemingly noob question, i've done some searching online but have been unable to find out anything concrete. Is there any way to turn off 3g, and just use edge? Alot of the times i just need email or rss, don't need any crazy fast internet...
thanks in advance!
Settings->Wireless and Network->Mobile networks->Network mode -> GSM
Settings- wireless and network(the topmost) -mobile network (second to last) -network mode-then tick just gsm
Sorry my sgs is german so i had to translate the steps but i hope u know where to look
Sent from my GT-I9000 using XDA App
Thanks alot both of you! really appreciate it!
hi there, thanks again for the help last time, however it seems, now that i have enabled gsm, i can no longer enable 3g..
my only options when i look at network mode are:
gsm/wcdma (auto mode), gsm only, and wcdma only, these are the same as the options i had before, so i don't know why it doesn't connect to 3g now
sakinfire said:
hi there, thanks again for the help last time, however it seems, now that i have enabled gsm, i can no longer enable 3g..
my only options when i look at network mode are:
gsm/wcdma (auto mode), gsm only, and wcdma only, these are the same as the options i had before, so i don't know why it doesn't connect to 3g now
Click to expand...
Click to collapse
what firmware are you running? have you updated to something other than a stock Bell ROM? there have been issues with some non-North American-based firmware with enabling the 850MHz band.
im running jpx?
it's darky's 6.0 rom, the weirdest thing is it was working prior to me switching to gsm only
should i just flash back to a bell rom? if so... which rom do you recommend? the eclair or froyo? thanks!
sakinfire said:
im running jpx?
it's darky's 6.0 rom, the weirdest thing is it was working prior to me switching to gsm only
should i just flash back to a bell rom? if so... which rom do you recommend? the eclair or froyo? thanks!
Click to expand...
Click to collapse
I am running froyo, but I have found that if you are running a non-Bell modem, then using the
Settings > Wireless > Mobile Networks > Network Mode
option to switch between 2G/3G doesn't enable the 850MHz band for 3G.
Recently I have flashed the Bell JK4 modem and don't have this issue any more (but strangely now the 900MHz band doesn't get enabled, but I don't need it here so I'm fine with it).
To check for yourself, assuming you don't have SGS Tools (which you should get if you don't) go into the phone dialer, and dial:
*#2263#
This brings up the band selection option. Then go into
[4] COMBI BANDS
and select
[8] WCDMA 850 ......
Then just back button out of there. You may have to cycle your radio by going into and then out of airplane mode to see the effect faster. Let me know if you then have 3G again.